| Home |
| Search |
| Today's Posts |
|
#14
posted to rec.boats.cruising
|
|||
|
|||
re-coring deck and ballast work
"Bruce" wrote
Normally if you butt joint you grind out a shallow vee nearly to the depth of the original material and extending about 4 inches back from each side of the joint. You then laminate in progressive widths of cloth until you fill the vee. You have then effectively turned the but joint into a continuation of the original material. I'd call that a scarf joint. No butts about it... |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Deck Re-coring on an Oldie | Boat Building | |||
| Deck Re-coring on an Oldie | General | |||
| Penetrating Epoxies in Deck Core Rot - Deck recoring | Cruising | |||
| Putting ballast to work | Cruising | |||
| Varnishing a house deck? [deck refinishing] | Boat Building | |||
Threaded Mode
