Check out WhitchNox. Made by Witchard. Wipe it on with a cloth, let set
for 30 minutes then hose it off. Maybe a quick polishing after to make it
really shiney. NevrDull is good for light work. BrassO was invented by
the military to build character and to keep sailors minds off of the numming
boredom of long seatime

Doug

"Rick Dunklee" wrote in message
...
As "Murphy" says, Stainless Steel isn't"! I have spots of rust on my bow
rail from salt water spray. Whats the best way to restore the rail with
out
marring it?

Rick Dunklee
"Dawn's Early Light"

"Doug Dotson" wrote in message ...
Check out WhitchNox. Made by Witchard. Wipe it on with a cloth, let set
for 30 minutes then hose it off. Maybe a quick polishing after to make it
really shiney.

Doug's right, though it's spelled "Wichinox." Contains phosphorus,
supposedly. Works for me.

E.J. Bleendreeble
http://www.casualsailor.com

Is that the stuff that's supposed to passivate the SS?

I've also had good luck with 3M's metal polish and restorer, but I like to
use Nevr-Dull first if possible.


"EJBleendreeble" wrote in message
om...
"Doug Dotson" wrote in message
...
Check out WhitchNox. Made by Witchard. Wipe it on with a cloth, let set
for 30 minutes then hose it off. Maybe a quick polishing after to make
it
really shiney.

Doug's right, though it's spelled "Wichinox." Contains phosphorus,
supposedly. Works for me.

E.J. Bleendreeble
http://www.casualsailor.com

I use a weak solution of nitric acid to passivate stainless. (I don't
remember, off hand what the mix is. I just keep about 5 gals mixed in a
plastic drum and hang the part in it for a few hours.)

A welder friend has a jelly solution that has nitric acid in it. He brushes
it on a finished stainless weld and lets it set for a couple hours then
rinse it off. Really cleans the weld effected area and never seems to rust
afterwards. Very expensive (about 15 bucks for a half pint jar.)

--
My opinion and experience. FWIW

Steve
s/v Good Intentions

That sounds like WitchNox. It is a bit expensive but it goes a long way.

Doug
s/v Callista

"Steve" wrote in message
...
I use a weak solution of nitric acid to passivate stainless. (I don't
remember, off hand what the mix is. I just keep about 5 gals mixed in a
plastic drum and hang the part in it for a few hours.)

A welder friend has a jelly solution that has nitric acid in it. He
brushes
it on a finished stainless weld and lets it set for a couple hours then
rinse it off. Really cleans the weld effected area and never seems to rust
afterwards. Very expensive (about 15 bucks for a half pint jar.)

--
My opinion and experience. FWIW

Steve
s/v Good Intentions

Citric acid 910%) works as well as nitric and is much safer - see -
http://www.finishing.com/0800-0999/909.html


On Thu, 25 Sep 2003 09:53:52 -0700, "Steve" wrote:

I use a weak solution of nitric acid to passivate stainless. (I don't
remember, off hand what the mix is. I just keep about 5 gals mixed in a
plastic drum and hang the part in it for a few hours.)

A welder friend has a jelly solution that has nitric acid in it. He brushes
it on a finished stainless weld and lets it set for a couple hours then
rinse it off. Really cleans the weld effected area and never seems to rust
afterwards. Very expensive (about 15 bucks for a half pint jar.)