LinkBack Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #6   Report Post  
posted to rec.boats.cruising
external usenet poster
 
First recorded activity by BoatBanter: Aug 2006
Posts: 6
Default Composite Propane tank anyone?

I have snipped the following from www.ragasco.com
It's not laid up from woven material, but spun around a core.
I have no interests in ragasco, other than as a satisfied customer :-)

Frequently Asked Questions

View all the advantages using Complet
All the advantages using Complet is showed under - Products above.

Safety
Safety is the same as or higher than steel. Safety has been the most important design factor during the development project.

The products are constructed in compliance with ADR, based on the requirements of prEN 12245 and approved by the authorities in Germany .

The experience in the market where more than 500 000 units have been shipped out over the last 3 years is very good. Customers and users are very pleased with the performance and handling of our product.

Behaviour in fire
The complet can be burned on a fire without causing other problems than a wild fire.

After a few minutes in a fire, the resin have burned off and the plastic liner melted. The gas pressure inside is relived through the glass fibre structure holding the pressure

No explosion!
fire_test_lpg_complet.wmv (1.89 mb) Fire Test Video (1.89 mb)

Three-piece Complet concept?
- Layer 1 is the seamless gas barrier layer with a boss to assemble the valve into
- Layer 2 is the pressure carrying layer made from continuous fibreglass and resin all around the cylinder
- Layer 3 is the outer casing protecting the pressure cylinder in case of drop,
See the 3 Part Design by clicking here.

The weight of the Complet
- See Technical Specifications
- Easier to lift for the users and handle for the distributors

Translucent
- Easy to see the level of gas inside the Complet. See Visible Gas Level by clicking here.
- You will be able to prevent running out of gas during a BBQ session.

Corrosion and chemical resistance
- Plastic materials do not corrode
- The materials used are resistent to realistic consentrations of acid and solvents
- The pressure vessel is protected by a coating on the outside

Refurbishing
Complet can be easily and inexpensively cleaned by power-washing with water.

Identification of Complet - Standard Marking
- Serial number
- Approval marking
- Corporate logo
- Corporate colors
- ID chip

Performance in colder climates
- The complet is approved and tested down to -40C
- If handled normally, the casing will have no damage at low
temperature, but it?s less resistant to significant impact if
handled severely.


--
C++: The power, elegance and simplicity of a hand grenade.
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is Off
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
how do you pump out the holding tank? Al Thomason Cruising 0 July 4th 06 05:19 PM
propane tank mounting bracket [email protected] General 2 October 5th 05 04:24 AM
Best holding tank chemicals. Chuck Baier Cruising 14 April 22nd 04 09:49 PM
FS: BBQ Propane tank in NY, final hours! Bobsprit Marketplace 0 March 10th 04 11:36 AM
FS: Propane tank and hose in NY Bobsprit Marketplace 0 March 4th 04 02:52 AM


All times are GMT +1. The time now is 03:13 PM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 BoatBanter.com.
The comments are property of their posters.
 

About Us

"It's about Boats"

 

Copyright © 2017