I can line up the boat with the slip, but a strong current will throw my stern down
stream. I can maintain steerage going in, but if I enter too fast I am in danger of
hitting the concrete wall at the front of the slip. These are slips with small metal
piers
pointing into the river. There are two slips between each pier, with a wooden post
at the head of the slip dividing the slip for two boats. I have to avoid hitting the
pier,
the wooden piling, and/or the boat in the downstream side of the slip.

Sherwin D.

Dick Locke wrote:

On Sat, 01 Jul 2006 23:45:20 -0500, sherwindu
wrote:

Unlike the gentleman who wants to single handle a bober pick-up, I have a
question about how to enter a slip with two crewmen aboard. Theoretically this
can be done under sail, but the first approach should be with an engine, an 9.9
Yamaha outboard
in my case. Problem is that our slip is on a bend in the river, so that with a
strong current flowing, we have to come in bow first to the narrow slip with the
current on
the beam. I have tried to come in a bit upstream of the flow and try to time it
so that
we are in line just as we enter. It's a bit tricky, and there is a tendency for
the stern
to swing downstream before we have a chance to get a line to it. Any
suggestions?

Sherwin D.

Can you/do you approach into the current? That would keep steering way
on while slowing speed over ground and speed relative to the hard
things you don't want to hit.