Pete C wrote:
On Wed, 28 Jun 2006 03:53:47 GMT, Peggie Hall
wrote:

The only real cure for permeated sanitation hoses is replacement.
However, if you'd rather wait till fall to do that miserable job, you
can buy youreself that much time by wrapping the hoses in Saran
Wrap...it must be Saran...no other brand.

Aluminium tape will do nicely too.

You have to be very careful using aluminum tape...to make sure that it
doesn't ever come in contact anywhere with any wiring or metal. 'Cuz if
it does, galvanic corrosion and/or electrolysis is the result.
--
Peggie
----------
Peggie Hall
Specializing in marine sanitation since 1987
Author "Get Rid of Boat Odors - A Guide To Marine Sanitation Systems and
Other Sources of Aggravation and Odor"
http://shop.sailboatowners.com/books...ku=90&cat=1304

On Wed, 28 Jun 2006 17:14:56 GMT, Peggie Hall
wrote:

Pete C wrote:
On Wed, 28 Jun 2006 03:53:47 GMT, Peggie Hall
wrote:

The only real cure for permeated sanitation hoses is replacement.
However, if you'd rather wait till fall to do that miserable job, you
can buy youreself that much time by wrapping the hoses in Saran
Wrap...it must be Saran...no other brand.

Aluminium tape will do nicely too.

You have to be very careful using aluminum tape...to make sure that it
doesn't ever come in contact anywhere with any wiring or metal. 'Cuz if
it does, galvanic corrosion and/or electrolysis is the result.

Good point, I guess a layer of duct tape or similar would take care of
that.

cheers,
Pete.