Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
posted to rec.boats.cruising
d parker
 
Posts: n/a
Default Bottom paint on prop


"Terry Spragg" wrote in message
...
Brian Whatcott wrote:
On Mon, 21 Nov 2005 10:49:53 +1100, "d parker"
wrote:


"News f2s" wrote in message
...


///


Well, once a month I take a swim with a wire brush, take a few deep
breaths and the see how long I can stay underwater hanging on to the
prop shaft. But then I'm in warm water (never less than 18C) and it's
clean and clear.

Sorry, didn't really answer your question, but that's my conventional
wisdom on the subject.

JimB


hmmm... Ever thought of attaching a regular snorkel to some larger hose?
Vacuum hose is great with a float at the loose end. You can stay down a
lot longer. Some of the co2 you exhale will get re-inhaled each time. I
havent passed out yet though.. Fingers crossed.

DP



How about a y fitting from the snorkel to two vacuum hoses, the float
on one would have a caged ping pong ball for an outflow only
and the float on the other would have a soft sprung flapper for an
inflow only??

Brian Whatcott Altus OK


All you need is an exhalation valve at the mask, and an iron lung to
enable you to suck air below about 4 feet. Try it, just suck in through
the mouth using a harden hose and exhale through your nose. Good luck.

Or a powered snorkel pump on a float on the surface, know as a hooka, and
some dive weights.

Terry K


Yeh the harden hose is difficult at longer lengths. So is garden hose. Thats
why, in my initial post, i recomened a larger diameter hose you see

DP


  #2   Report Post  
posted to rec.boats.cruising
Jonathan Ganz
 
Posts: n/a
Default Bottom paint on prop

In article ,
d parker wrote:
All you need is an exhalation valve at the mask, and an iron lung to
enable you to suck air below about 4 feet. Try it, just suck in through
the mouth using a harden hose and exhale through your nose. Good luck.

Or a powered snorkel pump on a float on the surface, know as a hooka, and
some dive weights.

Terry K


Yeh the harden hose is difficult at longer lengths. So is garden hose. Thats
why, in my initial post, i recomened a larger diameter hose you see


When I was a kid, we decided to try this at the bottom of a swimming
pool. I volunteered to be try breathing with the hose. There were four
of us. I went below with the hose, then the other three kids took deep
breaths and blew into the hose topside. I was able to extend my bottom
time by about 2 minutes, until they got winded and I got dizzy. Well,
I'm still hear and probably didn't damage too many brain cells.


--
"j" ganz @@
www.sailnow.com


  #3   Report Post  
posted to rec.boats.cruising
krj
 
Posts: n/a
Default Bottom paint on prop

Jonathan Ganz wrote:
In article ,
d parker wrote:

All you need is an exhalation valve at the mask, and an iron lung to
enable you to suck air below about 4 feet. Try it, just suck in through
the mouth using a harden hose and exhale through your nose. Good luck.

Or a powered snorkel pump on a float on the surface, know as a hooka, and
some dive weights.

Terry K


Yeh the harden hose is difficult at longer lengths. So is garden hose. Thats
why, in my initial post, i recomened a larger diameter hose you see



When I was a kid, we decided to try this at the bottom of a swimming
pool. I volunteered to be try breathing with the hose. There were four
of us. I went below with the hose, then the other three kids took deep
breaths and blew into the hose topside. I was able to extend my bottom
time by about 2 minutes, until they got winded and I got dizzy. Well,
I'm still hear and probably didn't damage too many brain cells.


Damaged them enough to use hear instead of here.
Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is Off
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Bottom of the Barrel Scotty ASA 19 November 11th 05 01:47 AM
temporary primer paint Evan Gatehouse Boat Building 3 November 9th 05 11:41 PM
How to Repair the Bottom of a 1,000-lb Boat? [email protected] Boat Building 19 November 7th 05 04:57 PM
Plans for cedar strip type round bottom sailing skiff [email protected] Boat Building 3 October 29th 05 01:22 AM
Which feathering prop? Glenn Ashmore Cruising 18 October 5th 05 09:25 AM


All times are GMT +1. The time now is 07:32 PM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 BoatBanter.com.
The comments are property of their posters.
 

About Us

"It's about Boats"

 

Copyright © 2017