" wrote in
ups.com:

Do you know how to set up the M802 for different transmit and receive
frequencies on the ham bands?

For example, DX station listening "up 2", etc.



Press and hold down the MODE and TX buttons, then press the number 2
button. That toggles it into transmit-on-any-frequency mode.

To get duplex, you press TX (in frequency mode, of course) and set your TX
frequency, say 14.205, then press RX and set the RX frequency...or just VFO
it. The set TX is supposed to stay on frequency, but I haven't really
tried it.

Here's the information you seek:
http://www.docksideradio.com/icom-802.htm

Here's a pdf from Icom:
http://www.icomamerica.com/dealerson..._freq_prog.pdf
Dealers only hell. Google found it!

There's mention on the net of CSM802 programming software, but I haven't
found it and don't know what it can do. Probably a PC-radio interface like
they have for the ham gear.

I found all this with Google. The information at docsideradio is great.
The manual sucks unless you're going to be a Marine Radio CB operator...(c;

--
Larry