Home |
Search |
Today's Posts |
#10
![]() |
|||
|
|||
![]() Doug Dotson wrote: To be really safe, put them in the cockit. That way they will drain out the scuppers and not be so prone to taking in sal****er. Another option is to put them up the mast a bit. I know someone that did this. Overflow will go out the fill rather than out the vent. Problem solved forever. I set my water tank vents on the outside of the cockpit coaming just down hill from the deck fill. When the tank is full water flows across the side deck and out the scupper. You do have to be careful to locate the vents so that the overflow will not flow back into the deck fill. Chartered a boat once that had the vent lines run up inside the stantions with a vent hole just under the top lifeline. Worked great but if you were holding the hose when the tank overflowed it would spray you in the face. :-) -- Glenn Ashmore I'm building a 45' cutter in strip/composite. Watch my progress (or lack there of) at: http://www.rutuonline.com Shameless Commercial Division: http://www.spade-anchor-us.com |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
HELP! Water in bilge when running... | General | |||
Water tank vent overboard or bilge | General | |||
Best holding tank chemicals. | Cruising | |||
Where to find ramp stories? | General | |||
Hot Water Dispenser | Cruising |