Home |
Search |
Today's Posts |
|
#1
![]() |
|||
|
|||
![]()
I just bought a Sea Ray 215 and I'm somewhat new to the sal****er.
Other than not putting it in the salty water, what is the best way to protect my boat after I take it out? Are there compounds that I should use when washing? I sometimes see people spraying their boats down with something coming out of a weed-sprayer type contraption. Any idea what that might be? Also, is regular Turtle Wax fine to use on the boat? Thanks. |
#2
![]() |
|||
|
|||
![]() |
#3
![]() |
|||
|
|||
![]()
The best protection for your boat in salt water it to make sure you
have zincs. There are solutions that you can buy that help dissolve the salt, but I just wash my boat with some soapy water. huh? zincs and/or soapy water protect a fiberglass boat from sal****er? Since when? |
#4
![]() |
|||
|
|||
![]()
JAXAshby wrote:
huh? zincs and/or soapy water protect a fiberglass boat from sal****er? Since when? Zincs protect against galvanic corrosion, which is more of a problem in salt water than fresh. Also, clean never hurts. Tom of the Swee****er Sea |
#5
![]() |
|||
|
|||
![]()
protects what kind of fiberglass from what did you say?
huh? zincs and/or soapy water protect a fiberglass boat from sal****er? Since when? Zincs protect against galvanic corrosion, which is more of a problem in salt water than fresh. Also, clean never hurts. Tom of the Swee****er Sea |
#6
![]() |
|||
|
|||
![]()
JAXAshby wrote:
protects what kind of fiberglass from what did you say? snip OK, so we got carried away. We were talking about a fiberglass *boat*, which includes certain metal underwater parts, e.g. propeller, through-hulls, rudder shaft etc. You are correct, the zincs don't protect the fiberglass itself. It will protect the boat. The biggest danger to the fiberglass parts, other than collision, is probably UV sunlight. The wax will help protect that. Washing will remove salt (corrosive) and, properly done, protect the wax. OK? Tom of the Swee****er Sea |
#7
![]() |
|||
|
|||
![]() "Tom Shilson" wrote in message news ![]() JAXAshby wrote: huh? zincs and/or soapy water protect a fiberglass boat from sal****er? Since when? Zincs protect against galvanic corrosion, which is more of a problem in salt water than fresh. Also, clean never hurts. Sacrificial Zincs are designed to deliberately corrode protecting the rest of the yacht. |
#8
![]() |
|||
|
|||
![]()
Sacrificial Zincs are designed to deliberately corrode protecting the rest
of the yacht. including the fiberglass, but not the wood? |
#9
![]() |
|||
|
|||
![]() |
#10
![]() |
|||
|
|||
![]()
hey squathead, buzz off yourself. the advice given by lowball types such as
yourself was specious. the asking the question was a newbie and so might thinkthe squathead advice was real. It was not and he was best helped by knowing it was not. take a hike jc haplame. The best protection for your boat in salt water it to make sure you have zincs. There are solutions that you can buy that help dissolve the salt, but I just wash my boat with some soapy water. huh? zincs and/or soapy water protect a fiberglass boat from sal****er? Since when? So, if you want to be a argumentative troll, and not add a bit of help to the discussion, buzz off. |
Reply |
|
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Aluminum prop lasts in saltwater | General | |||
Red Eye bearing buddies in saltwater environment | General | |||
Converting I/O from saltwater to freshwater cooled | Boat Building | |||
Freshwater Bassboat in Saltwater | General | |||
ALUMINUM TRAILERS IN SALTWATER??? | General |