Home |
Search |
Today's Posts |
#15
posted to rec.boats.building
|
|||
|
|||
plastic barrels and floating docks
On Jul 4, 11:48 am, Terry K wrote:
My 10' x 8' (overall) float uses 6 plastic barrels, 3 each spaced inside 2 pipes made of 11 degree chamfered 1x6"x5' rough sawn #2 cedar. 13 boards in circumference, plus one more ripped down to about 3" wide to space pipe and barrels snug. Probably could get away with 4 barrels total, but then might need to use full pipe length boards instead of staggering the 5' boards. They were cheap. The height in the water is good for a 14' powerboat and a 29' sailboat. It is stable. Each pipe is held together with steel banding and includes gaps in the boards for ladders, stowage, pet fish, spacer 2 x 4s, etc. The 2 pipes are harnessed in figure 8 chains. The chains will soon be held snug to the pipes with fence wire braces and threaded rod tensioners, or possibly a few short staples. Fence wire braces corner to corner will be added to stabilize pipes fore and aft. The decks are 5' x 5'. 2 layers of the same 5' cedar, criss crossed, nailed and clenched, with eye bolts at each corner. The dock is held (pushed) offshore by an old lightning chewed aluminum mast chained to a rock. The gangway is "T" sectioned, nailed up from 1 x 5s and a 1 x 4, with cross pieces at the ends. The dock has been left out in the snow and ice, only floated up in high water in the fall and floated down in the spring freshet. It is being neglected to destruction. So far, 3 years and no signs of failure. I expect the standard banding to rust out sometime in the next 5 years. Rebanding the raft pipes will take about an hour, provided I get it done before it all suddenly and completely disintegrates. I may use stainless banding this time. It was cheap, easy and fun to assemble. Can be muscled around myself, if moved in pieces. It looks great! I thought I sent this posting two weeks ago? Terry K sorry to ride a post. only thing i would warn is make sure the barrels are not locked into the dock. if one gets a crack or hole in it its going to cause problems unless it can fall out. if it cant it will pull its section down as it fills with water. |