Home |
Search |
Today's Posts |
#6
![]()
posted to rec.boats.building
|
|||
|
|||
![]()
Garland Gray II wrote:
My wife handed me a piece of her jewelry -- a square of ceramic or the like-- from which the glued on eye had become detached. The old glue and feels like silicone. Well in this case, silicone is probably the correct adhesive. Assuming the eye is metal, epoxy may well not survive the differential thermal expansion & contraction between the metal and the ceramic. Hexane is (or was a few years back, you never can be sure over here with the EU and VOCs) one of the major constituants of Evostik adhesive remover. Might be worth going to a store and looking at a can. Remember even to get silicone to stick, its going to need to be 'waterbreak' clean. You also need a really strong clear electrical grade silicone. Probably be able to get away with Servisol silicone adhesive sealent, but you *might* need the Dow-Corning variety. You cant get that stuff off clean glass even *with* a razor blade. -- Ian Malcolm. London, ENGLAND. (NEWSGROUP REPLY PREFERRED) ianm[at]the[dash]malcolms[dot]freeserve[dot]co[dot]uk [at]=@, [dash]=- & [dot]=. *Warning* HTML & 32K emails -- NUL: 'Stingo' Albacore #1554 - 15' Early 60's, Uffa Fox designed, All varnished hot moulded wooden racing dinghy. |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
removing frozen ST. Stl. screws | Boat Building | |||
Removing battery | General | |||
Removing a powerboat steering wheel | Boat Building | |||
Silicone Removal | Cruising | |||
Removing bottom paint... | General |