Home |
Search |
Today's Posts |
#9
![]()
posted to rec.boats.building,uk.rec.sailing
|
|||
|
|||
![]()
Bumps are easier to keep clean than pits so sand or ground rubber additives
are popular but the paint wears off the tops of the bumps faster. Somewhere around here I have some samples of a really professional system for applying non-skid patterns. It comes in heavy vinyl sheets in positive and negative versions in just about every pattern used on production boats. The positive is applied to plugs to form the pattern on the mold and the negative is used to apply a gel coat pattern to a finished deck. The result is really professional looking but takes a lot of work and isn't cheap. It is reusable though so with a little planning you can apply a fairly large area with one sheet. -- Glenn Ashmore I'm building a 45' cutter in strip/composite. Watch my progress (or lack there of) at: http://www.rutuonline.com Shameless Commercial Division: http://www.spade-anchor-us.com "Brian D" wrote in message . .. I've heard of some folks using Epsom salts as well ...same effect. Glenn, or anybody, Know of any anti-skid treatment that a) works well, and b) does NOT turn into a dirt and grime collector? I need to decide what to do on my aft deck and the sheer decks (see http://www.glacierboats.com/tongass ). I'm not worried about cost if it's the right product... Thanks, Brian "Glenn Ashmore" wrote in message news:NDYjg.112233$Ce1.49509@dukeread01... "Ulrich G. Kliegis" wrote And the sugar in deeper layers acts hygroscopic, i.e., it attracts water. Not exactly what is intended. But thanks anyway. Regards, U. The way you use sugar (or salt for that matter) is to sprinkle it on evenly with a flour sifter while the paint is still wet. Then after the paint is cured wash it off and the crystals dissolve out.leaving a nice uniform finely pitted surface. The only real problem is that the pits are the shape of the crystals, often straight sided which collects dirt and is hard to brush out completely. -- Glenn Ashmore I'm building a 45' cutter in strip/composite. Watch my progress (or lack there of) at: http://www.rutuonline.com Shameless Commercial Division: http://www.spade-anchor-us.com |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Optimal anti-slip paint? | Boat Building | |||
How to determine what type of paint is used on a boat | General | |||
Pleased so far with my new boat paint........ | General | |||
Bottom Paint ,,, 20 layers of Bottom Paint ,,, how to remove it. | Cruising | |||
Non skid deck paint | Cruising |