Home |
Search |
Today's Posts |
#4
|
|||
|
|||
Fuel Tank Construction
"Wayne.B" wrote in message ... On Thu, 03 Jun 2004 15:15:54 -0700, Mark wrote: Have you really thought this through. You need several hard estimates before you close the deal. ======================================== I've gotten several estimates (all over $30K), and a large enough survey adjustment to make for a satisfactory deal. Have you had any tanks made from 1/4 or 5/16 aluminum? I'm particularly looking for fabrication advice regarding coatings, geometry, baffles, fill/vent/drain fittings, etc. The tanks will be made by a contractor but I want to be sure they are spec'd properly. I'd hire a naval architect for a day. Stuff like designing a 500 gallon tank probably should not be left to a contractor. Baffles will be absolutely required, about every 24-30", External stiffeners will probably be required, depending on the head on the tank (height from bottom of tank to top of the vent). Geometry - will you duplicate the existing tanks? -- Evan Gatehouse you'll have to rewrite my email address to get to me ceilydh AT 3web dot net (fools the spammers) |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
fuel tank cleaning | General | |||
97 sea ray sundancer fuel tank? | General | |||
Diesel Fuel Decontamination Units Give Stored Fuel Longer Life. | General | |||
Diesel Fuel Decontamination Units Give Stored Fuel Longer Life. | Boat Building | |||
Fuel Tank Clog....Please help!! | General |