Fuel Tank Construction
On Thu, 03 Jun 2004 15:15:54 -0700, Mark wrote:
Have you really thought this through. You need several hard estimates
before you close the deal.
========================================
I've gotten several estimates (all over $30K), and a large enough
survey adjustment to make for a satisfactory deal.
Have you had any tanks made from 1/4 or 5/16 aluminum? I'm
particularly looking for fabrication advice regarding coatings,
geometry, baffles, fill/vent/drain fittings, etc.
The tanks will be made by a contractor but I want to be sure they are
spec'd properly.
|