Hi
Look at www.pelinplans.co.nz I am building a dinghy called Nomad 12' it has
a gullwing bottom great in a following sea there also is 10 ' in the design
range.
its ply and frames shown on the plans but I am converting it over to been
"frameless" by changing the seating etc...
maybe worth a look....
"peterMelbourneAustralia" wrote in
message om...
My fahter, 72, is finding his 12ft fiberglass boat to heavy to launch
by himself and needs a lighter boat.

The present boat has a 5hp outboard, solidly built, seaworth and has a
deep keel, unfortunately it is also a little heavy.

Was thinking of the 12ft version of John Welsford's Trover (without
well).

Dad's boat must be fast to build (not complicated), for motoring only
(sailing boats need not apply!!!), seaworthy, light, easy to build (a
few panels of marine ply) and not overly expensive. Basically he needs
a ply version of what we in australia call a 'tinnie'.

Thr Trover (12ft vers) is 12ft long, 4'7 beam. In cross section it is
made of only 5 panels (narrow flat bottom and two panels on each
side). Flat bottomed punts need not apply.



N. Peter Evans