Home |
Search |
Today's Posts |
#1
posted to rec.boats.building
|
|||
|
|||
VETUS EXHAUST HOSE
Is it worth the money? I need 3" hose for my brand new Yanmar 4JH4SBE ,
55 HP. Other options are Shields,Trident,Titan etc. Have you instaled vetus exhaust hose on your boat? Thanks,afpy |
#2
posted to rec.boats.building
|
|||
|
|||
VETUS EXHAUST HOSE
It depends on your needs. I installed 3" Shields on my Yanmar 4JH2 from the
water lift muffler to the transom. That worked just fine. However, I couldn't get it to curve enough to go from the injection elbow to the muffler mounted under the engine. I purchased a short piece of the 75mm Vetus and was able to curve and install it with no problems. It's worth the money if you have any problem areas to run it through. Rusty "afpy" wrote in message ups.com... Is it worth the money? I need 3" hose for my brand new Yanmar 4JH4SBE , 55 HP. Other options are Shields,Trident,Titan etc. Have you instaled vetus exhaust hose on your boat? Thanks,afpy |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Clear corrugated suction hose (was) Bilge Pump Upgrade | Cruising | |||
Clear corrugated suction hose (was) Bilge Pump Upgrade | UK Power Boats | |||
Braca Paddles: Living With The Hose Clamp? | General | |||
What gives with hose fittings? | Cruising | |||
Heater hose conusdrum | Boat Building |