have you tried searchidg the Internet for "cold moulding" or "cold
molding" (the latter is the Amercian spelling) since that is the type of
construction you've chosen? also "cold moulded"

"Miljenko" ) writes:
Hello,

I would like to build a 9 meters motor boat with round form in WEST
technology in which I am experienced on small boat (6mtr). Diagonal strip
lines of plywood should be used with epoxy and finaly laminated with rowing.
Inboard motor is prepaired Mercedes 300D with 90PS. Form should be
displacement/semidisplacement with speed aproximately 10 knots cruising and
12 knots max.. I found od www.tadroberts.com something for studing White
pine, Douglas fir and Yellow cedar, nice forms but still to far from good
plan to start bulding.
So, if you got free plans or good site please notice me.
Thanks.




--
------------------------------------------------------------------------------
William R Watt National Capital FreeNet Ottawa's free community network
homepage: www.ncf.ca/~ag384/top.htm
warning: non-freenet email must have "notspam" in subject or it's returned

William R. Watt wrote in message
...
have you tried searchidg the Internet for "cold moulding" or "cold
molding" (the latter is the Amercian spelling) since that is the type of
construction you've chosen? also "cold moulded"

"Miljenko" ) writes:
Hello,

I would like to build a 9 meters motor boat with round form in WEST
technology in which I am experienced on small boat (6mtr). Diagonal
strip
lines of plywood should be used with epoxy and finaly laminated with
rowing.
Inboard motor is prepaired Mercedes 300D with 90PS. Form should be
displacement/semidisplacement with speed aproximately 10 knots cruising
and
12 knots max.. I found od www.tadroberts.com something for studing White
pine, Douglas fir and Yellow cedar, nice forms but still to far from
good
plan to start bulding.
So, if you got free plans or good site please notice me.
Thanks.


***

Hello,
yes I did. I searched and find few nice, not plans, but very good advice.
Alredy have script from Van De Stadt about building this kind of boat. The
hull form is the bigest problem because many people who think they have good
plans are actualy selling "floating boxes". Result is huge waves around and
capuccino behind boat. Of course empty fuel tank much soon than you
expected.
Thanks.
Miljenko.

The hull form is the bigest problem because many people who think they
have good
plans are actualy selling "floating boxes". Result is huge waves around
and
capuccino behind boat. Of course empty fuel tank much soon than you
expected.

Well, since you know so much about other peoples designs, you should draft
your own plans.
Send us pictures.

--
Jacques
http://www.bateau.com

"Jacques Mertens" lifted the trapdoor, peered around and
wrote:

Well, since you know so much about other peoples designs, you should draft
your own plans.
Send us pictures.

it's a troll - has to be ..

In any event, I will stake money that his contribution to the ng will be
around zero.

Oh, and he'll simply be rude if you challenge him, he's done that already

steveb

I'm waiting for his thread "Looking for free epoxy". ;-)

steveb wrote:

"Jacques Mertens" lifted the trapdoor, peered around and
wrote:

Well, since you know so much about other peoples designs, you should draft
your own plans.
Send us pictures.

it's a troll - has to be ..

In any event, I will stake money that his contribution to the ng will be
around zero.

Oh, and he'll simply be rude if you challenge him, he's done that already

steveb

What is the matter with you gentlemen?
The man just asked for any info on free plans.
What's wrong with that?



"Miljenko" wrote in message
...
Hello,

I would like to build a 9 meters motor boat with round form in WEST
technology in which I am experienced on small boat (6mtr). Diagonal strip
lines of plywood should be used with epoxy and finaly laminated with
rowing.
Inboard motor is prepaired Mercedes 300D with 90PS. Form should be
displacement/semidisplacement with speed aproximately 10 knots cruising
and
12 knots max.. I found od www.tadroberts.com something for studing White
pine, Douglas fir and Yellow cedar, nice forms but still to far from good
plan to start bulding.
So, if you got free plans or good site please notice me.
Thanks.

Hello to ALL of you,

first, I am telecommunications engineer and if anyone asked me about
building some electronic device I always helped him. I gave him schematic
diagram if I had one but did not made a device. That is for what I asked
for !!!
I understand that many peoples live from selling boat plans, I understand
that they hate even word "free" but what I can not understand is why they
can not read headline of my question I WROTE: "FREE BOAT PLANS" ?!?
Thanks to all of you who understood my words and helped me not only by great
links and mails but even with words of supporting on this group.
If anybody want to help me and support my whishes to build improved wood
traditional hull form boat please write on .
This newsgroup stinks of selfregarding idiots and fastprofiters.

THANKS.

POZDRAV IZ HRVATSKE - zemlje najljepseg mora i malih brodova!
HELLO FROM CROATIA - land of the most beautifull see and little ships!
Miljenko.

Sorry about my english, I am in little hurry so my fingers are not following
my head.

"Miljenko" wrote in message
...
Hello to ALL of you,

first, I am telecommunications engineer and if anyone asked me about
building some electronic device I always helped him. I gave him schematic
diagram if I had one but did not made a device. That is for what I asked
for !!!

Hello Miljenko,

I have a collection of links on my boatbuilding site:
http://www.customware.nl/boats/en/index.html

Option "interesting links". Maybe you can find something of your intrest
there.


HELLO FROM CROATIA - land of the most beautifull see and little ships!

Been twice to Croatia (Opatija), on my honeymoon and later in the season
again. Unfortunately I wasn't caught by the boatbuilding virus then. But it
sure was beautiful!

Meindert
(also an electronics engineer that loves to build boats after a days work
behind a computer screen)

Meindert Sprang wrote in message
...
"Miljenko" wrote in message
...
Hello to ALL of you,

first, I am telecommunications engineer and if anyone asked me about
building some electronic device I always helped him. I gave him
schematic
diagram if I had one but did not made a device. That is for what I
asked
for !!!

Hello Miljenko,

I have a collection of links on my boatbuilding site:
http://www.customware.nl/boats/en/index.html

Option "interesting links". Maybe you can find something of your intrest
there.


HELLO FROM CROATIA - land of the most beautifull see and little ships!

Been twice to Croatia (Opatija), on my honeymoon and later in the season
again. Unfortunately I wasn't caught by the boatbuilding virus then. But
it
sure was beautiful!

Meindert
(also an electronics engineer that loves to build boats after a days work
behind a computer screen)


***
Hello,

be sure I will look at your site.
Opatija is tourist destination since Austro-Hungarian Monarchy so there is
no industry even small workships. But in West Istria, Kvarner, Mid and South
Dalmatia there are many shipyards (few large but many small like
www.piculjan.hr , www.plovila-tusek.com , www.seaway.hr/nerezine630.htm ...)
many are built last 4 years. Most of them produce modified traditional forms
in plastic.
By the way, on honeymoon there are many things to enjoy, not searching for
shipyards. C O N G R A T U L A T I O N S !!!
I am electronics engineer, but my hoby is sea, fishing, diving and of course
boat building only for myself ( NOT FOR SALE). I have not money to buy boat
so I am building myself slow as my financial alows. But my grandmother have
nice house 30m from sea in Crikvenica so I am often down there.
Now I am 30 Y.O. married man with 2 year old daughter and boat must be this
size to handle not only me, my friend and equipement but now my family too.

Thank You for answering.
Miljenko.

"Miljenko" wrote in message ...

If anybody want to help me and support my whishes to build improved wood
traditional hull form boat please write on .
This newsgroup stinks of selfregarding idiots and fastprofiters.

Uh, F**K you! Hope that translates properly. I have seen no one at all
try to sell you anything here. Anyway, try:
svensons.com
or
http://www.smallboatdesign.co.uk/
You cheap, highbrow, prick.
Scotty from SmallBoats.com



THANKS.

POZDRAV IZ HRVATSKE - zemlje najljepseg mora i malih brodova!
HELLO FROM CROATIA - land of the most beautifull see and little ships!
Miljenko.

Sorry about my english, I am in little hurry so my fingers are not following
my head.