"Jonathan"writes

I am pushing to finish a project reseating and resealing the deck/hull
connecting machine screws on a 28' Sabre. I need to set new teak bungs
in the toerail where I removed them to access the screws.

Given the generally lower temperatures I am working in. (A *lot* pf rain
has delayed this project) I am not sure about setting them in epoxy.
the Sabre factory says they were originally set in Resorcinol.

Any thought would be greatly appreciated.

Out of the weather as in inside, varnish works well.

In your situation, resorcinol makes sense.

I use lots of epoxy, but this is not the best application for it IMHO.

HTH


--
Lew

S/A: Challenge, The Bullet Proof Boat, (Under Construction in the Southland)
Visit: http://home.earthlink.net/~lewhodgett for Pictures