If the toe rail is going to be bright you might think of using varnish. It
sucks to deal with epoxy and resorcinol when a simple solution like varnish
is available. And, no cleanup - be as messy as you want!


"Jonathan" wrote in message
...
I am pushing to finish a project reseating and resealing the deck/hull
connecting machine screws on a 28' Sabre. I need to set new teak bungs
in the toerail where I removed them to access the screws.

Given the generally lower temperatures I am working in. (A *lot* pf rain
has delayed this project) I am not sure about setting them in epoxy.
the Sabre factory says they were originally set in Resorcinol.

Any thought would be greatly appreciated.

thanks,

Jonathan