Home |
Search |
Today's Posts |
#6
|
|||
|
|||
Oh Jack,
First things first: What size and age? In the 50's a Riviera was an 18-20' open runabout but in the 60's CC put that same name on 30+' cabin cruisers - let's assume you mean the former. Then (as you know) there are different flavor carpenters - and that is just before you get your feet wet. A being a boat builder is sort of like being a an instrument special cabinet maker like the kind that builds grand pianos from scratch. I hope you are a better than "decent" carpenter by current trade standards. Next trick, find one at all - let alone a good candidate for a restoration. These were monagany boats, and if poor cared for they can be salvage proof pretty fast. Read everything you can find about wooden boats (find a friend that has an old collection of Wooden Boat Magazine) and start studying. The hull is all that counts. When(if) you find one, get ready to go after it with an icepick or a good pointed pocket knife. Any wood you can stick the tool into will have to be dealt with (either sistered or replaced). Do not be bashful, the sellers usually think that all it will take is rolling (no joke) another coat of varish on it to be good to go. If the boat is not complete, be wary, people do not take fittings off good boats, and they can be impossible to replace. Don't fret the engine. These were old flat head marine engines and if it needs more than the carburetor cleaned, take it out (save it) and put in something new so you can enjoy the boat. I have seen projects like this numerous times. Even one done by a librarian that was sent to me by a mutual friend because he did not know about how to select and use a plane (then - he does now). He was on his third the last time we talked (boat - not plane). Expect it to take a year if the boat looks perfect. Did this answer your questions? If not - try again. I will be gone for a week, but I am here alot. Matt Colie Lifelong Waterman, Licensed Mariner and Perpetual Sailor Jack wrote: Hello all, (This has probably been answered before ) My wife has this crazy idea that she wants me to restore an old Chris Craft Riviera. She saw one on a local lake, and fell in love with it. She thinks that since I am a decent carpenter, its only natural that I could restore a boat, right ?? (oh my god, what am i writing!!) I have no idea where to start. Have you seen first timers restore these boats? If I find one to restore, what should would be something you look for to not buy the project boat. (like missing bottom, etc, engine really bad, etc.) We might just buy one, but I would like to give a restoration a shot. I have already done cars, so I know that restoration work is tough. Thanks for your time. Sorry for the long post. |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Chris Craft 26 ft deck boat | General | |||
Regal 2400 vs Sea Ray 220 vs Chris Craft Launch 25 | General | |||
FS: Chris Craft Scorpion 232AC with or without trailer in OH | Marketplace | |||
FS: Chris Craft Scorpion 232AC with or without trailer in OH | Marketplace | |||
35' chris craft built landing craft - looking for info | Boat Building |