Hi guys,

Hoping I can get some advice here. I have a 15 Ft fibreglass half cabin,
Yesterday I noticed a puddle on the floor. I found a leak in the hull near
the keel and the fibre was a bit spongy. I ground it out and down and had
water drippin out. I will leave it for a while to dray and would then liek
to do the following.
1 - Fill the gap with kahGlass , fibre-reinforced filler. smooth it down,
fibreglass resin with matting on top, the finally a few coats of flowcoat.

Do you think this will work.

Thanks
Alan