Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Glenn Ashmore
 
Posts: n/a
Default


"William R. Watt" wrote in message
...
"Mirror, mirror in the head
Who's the fairest maid he'll bed?"


I have to admit a thought similar to that regularly crosses my mind on
lonely nights in the boat shed. Unfortunately if I don't get this thing in
the water soon my prostate may not allow it. :-)


  #2   Report Post  
alex
 
Posts: n/a
Default

How about an acrlic mirror w/ a 1/8in. plexiglass overlay that can be
replaced when needed?

  #4   Report Post  
William R. Watt
 
Posts: n/a
Default


what about a hand held vidocam linked to a flat panel display mounted on
the wall? viewers could look at the back of their heads and the soles of
their feet which is a nice feature not found in the usual wall-mounted
mirror. a low power draw portable computer might not consume very muhc
electricity, only drawing power when in use.

--
------------------------------------------------------------------------------
William R Watt National Capital FreeNet Ottawa's free community network
homepage: www.ncf.ca/~ag384/top.htm
warning: non-FreeNet email must have "notspam" in subject or it's returned
  #5   Report Post  
Glenn Ashmore
 
Posts: n/a
Default

I thought of that but I don't think the inverter could handle the hair
driers and the computer at the same time. :-)


"William R. Watt" wrote in message
...

what about a hand held vidocam linked to a flat panel display mounted on
the wall? viewers could look at the back of their heads and the soles of
their feet which is a nice feature not found in the usual wall-mounted
mirror. a low power draw portable computer might not consume very muhc
electricity, only drawing power when in use.

--
--------------------------------------------------------------------------

----
William R Watt National Capital FreeNet Ottawa's free community

network
homepage: www.ncf.ca/~ag384/top.htm
warning: non-FreeNet email must have "notspam" in subject or it's returned





  #6   Report Post  
Ron White
 
Posts: n/a
Default

I know nothing about mirrors other than the obvious (?) But I built my
boat's windshield with 3/16" tempered glass. A local glass co. cut the
pieces from what I understood was regular glass then sent the pieces off to
be tempered. It was not expensive, only adding maybe 50 bucks to the job to
have it tempered. So if you want something stronger than plain old glass,
look into getting some glass tempered then silvered.
I did shop around for this job as some companies e quoted outrageous prices
but I ended up with the job done reasonably.



--
Ron White
Boat building web address is
www.concentric.net/~knotreel


  #7   Report Post  
Glenn Ashmore
 
Posts: n/a
Default

That is what I am looking at now. Local glass supplier can order tempered
glass beveled edge mirrors. About $60 each for the size I need.
Considerably higher than $10 for standard double strength mirror but cheap
for peace of mind.

"Ron White" wrote in message
...
I know nothing about mirrors other than the obvious (?) But I built my
boat's windshield with 3/16" tempered glass. A local glass co. cut the
pieces from what I understood was regular glass then sent the pieces off

to
be tempered. It was not expensive, only adding maybe 50 bucks to the job

to
have it tempered. So if you want something stronger than plain old glass,
look into getting some glass tempered then silvered.
I did shop around for this job as some companies e quoted outrageous

prices
but I ended up with the job done reasonably.



--
Ron White
Boat building web address is
www.concentric.net/~knotreel




  #8   Report Post  
Paolo Zini
 
Posts: n/a
Default


That is what I am looking at now. Local glass supplier can order tempered
glass beveled edge mirrors.


Only curious... There is a translation problem maybe...
Tempered glass means the type of glass that if broken fall down in million
of small pieces?
If is that, is safe?
Isn't better the safety glass used for windshield and shop windows, the type
that have a plastic film between two layer of glass? that one even if broken
remain in a single piece, connected by the plastic film...

Paolo




---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.778 / Virus Database: 525 - Release Date: 15/10/2004


  #9   Report Post  
Glenn Ashmore
 
Posts: n/a
Default

I considered safety glass but couldn't find mirrors made with it. Tempered
glass breaks into millions of little pieces but the "death of a thousand
cuts" takes a lot longer than a single good slice from a long sharp shard.
:-)

After consulting with the glass dealer I am going to bed them in mirror
mastic on a 4 mm okoume so if it breaks most of the particles should stay in
place. There will be a lot of tiny chips to be cleaned up but at least they
will not be fatal. Also the beveled edges add a touch of "class" to the ah,
er, ... what's the naudical term for boudoir?. :-)

"Paolo Zini" wrote in message
...

That is what I am looking at now. Local glass supplier can order

tempered
glass beveled edge mirrors.


Only curious... There is a translation problem maybe...
Tempered glass means the type of glass that if broken fall down in million
of small pieces?
If is that, is safe?
Isn't better the safety glass used for windshield and shop windows, the

type
that have a plastic film between two layer of glass? that one even if

broken
remain in a single piece, connected by the plastic film...

Paolo




---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.778 / Virus Database: 525 - Release Date: 15/10/2004




  #10   Report Post  
Randall
 
Posts: n/a
Default

Imagine the bilge after some of those shards makes it to your bilge pump.

"Glenn Ashmore" wrote in message
news:djkdd.50288$hj.2509@fed1read07...
I considered safety glass but couldn't find mirrors made with it. Tempered
glass breaks into millions of little pieces but the "death of a thousand
cuts" takes a lot longer than a single good slice from a long sharp shard.
:-)

After consulting with the glass dealer I am going to bed them in mirror
mastic on a 4 mm okoume so if it breaks most of the particles should stay
in
place. There will be a lot of tiny chips to be cleaned up but at least
they
will not be fatal. Also the beveled edges add a touch of "class" to the
ah,
er, ... what's the naudical term for boudoir?. :-)





Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is Off
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Trailer Back-Up Aid AK General 19 September 22nd 04 05:11 PM
Mirrors for my vessel Jeff ASA 4 June 29th 04 05:52 AM


All times are GMT +1. The time now is 05:00 PM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 BoatBanter.com.
The comments are property of their posters.
 

About Us

"It's about Boats"

 

Copyright © 2017