Home |
Search |
Today's Posts |
#10
posted to rec.boats.building
|
|||
|
|||
polyurethane adhesive
Daniele Fua wrote:
Thanks to you all, the poll had one unanimous response and I will comply for su epoxy. Thanks to Steve for the additional advices: I will follow them too. My planks are already 1 inch thick which puts me on the safe side and I will cross the grain directions. I was also thinking of gluing teak veneer (approx 3/32" thick) on the sides in order to protect the open end of the fibers. Daniel Or maybe a couple of layers of 1/2 ounce "deck" cloth and epoxy to seal everything? |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
2-part polyurethane foam | UK Paddle | |||
Polyurethane and tacky epoxy | Boat Building | |||
Polyurethane sealer? | Boat Building | |||
Polyurethane paint | Boat Building | |||
How to Remove Polyurethane Glue | Boat Building |