| Home |
| Search |
| Today's Posts |
|
#6
posted to alt.sailing.asa
|
|||
|
|||
|
wrote
What are the advantages? An Electra-San is a device for killing bacteria in the flush water from the head. It's not actually a head. The advantage is that this treated flush water is relatively safe (still not ecologically benign) and legal to discharge in many areas. This means a smaller holding, less pupm-outs, and a less yucky anchorage in those lovely remote tropical paradises. What are the disadvantages? It's expensive, it uses a lot of electricity, it's not legal to dishcarge a lot of places, and it's reliability is not 100% What are the thru-hull and other unquie requirements for such heads? Same as any other head, pretty much, with the addition of wiring, the extra battery capacity (not much really is required), and studing how to install the device properly. If you use one in fresh water, you need an extra attachment to add salt. John Cairns wrote: http://www.raritaneng.com/products/toilets/index.html You can get the official line on what these guys claim. I know someone that had an electric head on their boat, they weren't fond of it, claimed it was very noisy. Not to mention expensive. I'll give you very good odds that they had one that was either a poor conversion (adding an electric pump to a regular head) or one that was installed poorly. The newer electric flush models are awesome, they use little flush water (thus allowing longer "hang time" on the same capacity holding tank), and they're very easy to use (thus eliminating the possibility of sinking the boat because somebody didn't open/close the right valves in the right sequence). We installed a relatively new model electric head last year and it's very nice. It's also quiet... the fresh water pump is louder than the macerator/pump built into the head. Fresh whatever- Doug King |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| OT--9/11 Commission Suppressed the Evidence. | General | |||
| Volvo Question, putting MDIIB heads on a MD11C? | Cruising | |||
| Another strip-plank question - a bit long | Boat Building | |||
| Lavac heads vs. others | Cruising | |||
| fixing screw heads pulled though surface ply | Boat Building | |||