On 02 Jun 2004 01:23:06 GMT, something compelled
(JAXAshby), to say:

It was NOT about an installation done
prior in a forbidden manor.

Why is the manor forbidden? Is it haunted or something?

Dud? Let me explain at a level a child should understand. You run the
engine -it gets hot. You turn it off. You raise the sails so the boat
heels and puts the exhaust under water. The engine cools and water gets
sucked in 'cos the siphon break valve no longer works...

get it?

Cheers

JAXAshby wrote:
Now tell us why you think you don't need an antisiphon valve. Vague
references to gas laws are required.


you can't siphon water uphill using the weight of exhaust gas going downhill.
dud!

Are you sure that there is no forward component?

Cheers

JAXAshby wrote:

the forward vector is not produced by the curve.


Just a quick note, Sails are curved on both sides and yes that curve
has a great deal to do with moving the boat.


oxxy, give it up. you make any first year aero eng student choke and gag

with

your silliness. you are dumber than his sister, and she is still in high
school.

T'would be interesting to hear from your vast wealth of knowledge why
the curve then has nothing or little to do with moving the boat.


Oz1...of the 3 twins.

I welcome you to crackerbox palace,We've been expecting you.

a freezer full of fish, eh thom?

Jax,

You know what they say; "A drunk is the luckiest Fisherman!"

That was a nice Leap Oz. Remember we're doing catch and release. Don't
work him to hard.

Ole Thom

you seem a tad confused, dude.


From: "Steve Daniels, Seek of Spam"
Date: 6/2/2004 12:17 AM Eastern Standard Time
Message-id:

On 02 Jun 2004 01:23:06 GMT, something compelled
(JAXAshby), to say:

It was NOT about an installation done
prior in a forbidden manor.

Why is the manor forbidden? Is it haunted or something?

nave, go look at a wet exhaust, any wet exhaust. you simply don't understand
what such is.

Dud? Let me explain at a level a child should understand. You run the
engine -it gets hot. You turn it off. You raise the sails so the boat
heels and puts the exhaust under water. The engine cools and water gets
sucked in 'cos the siphon break valve no longer works...

get it?

Cheers

JAXAshby wrote:
Now tell us why you think you don't need an antisiphon valve. Vague
references to gas laws are required.


you can't siphon water uphill using the weight of exhaust gas going
downhill.
dud!

nave, English is beyond you? read it again and again and again as many times
as you need (seek adult help) until you finally understand that no one said
there was no forward component.

From: Navigator
Date: 6/2/2004 2:02 AM Eastern Standard Time
Message-id:

Are you sure that there is no forward component?

Cheers

JAXAshby wrote:

the forward vector is not produced by the curve.


Just a quick note, Sails are curved on both sides and yes that curve
has a great deal to do with moving the boat.


oxxy, give it up. you make any first year aero eng student choke and gag

with

your silliness. you are dumber than his sister, and she is still in high
school.

T'would be interesting to hear from your vast wealth of knowledge why
the curve then has nothing or little to do with moving the boat.


Oz1...of the 3 twins.

I welcome you to crackerbox palace,We've been expecting you.

I believe Jocks really has no idea what makes a sail move a
boat against the wind.

oxxy, you fail understand yet again. your belief is in utter error.

oxxy, it was written in English, so that is the language you have to use when
reading it.

. It was NOT about an installation done
prior in a forbidden manor.

Wow, top secret installation of an exhaust.

Were ther armed guards around the manor


Oz1...of the 3 twins.

I welcome you to crackerbox palace,We've been expecting you.

Hmmmm if that's the case Jocks, What vector is produced as a result of
the curving?


Oz1...of the 3 twins.

none.

and, unfortunately oxxy, you really don't know why.