No.. that's not a big issue. If it happens you can still find the chain by
the floating line remaining. Our tides are 7 feet.
In ice... long lines and buoys get dragged and ripped. Short lines and small
blocks of wood.

Plus I can always dive it for Tomek next spring for a bottle of air and a
bottle of rum. ;-)


CM

"Scott Vernon" wrote in message
...
| Don't you worry about a motor boat running over it?
|
|
| "Capt. Mooron" wrote in message
| ...
| If it does get torn off.... you still have 20 feet of floating line
| [yellow/
| 1/2"] to snag. That won't rip off. It would be a rare occasion to remove
| the
| 2x4.... but I've seen it happen with 7 feet of ice and -45 temp all
| winter.
|
| CM
|
| "Bluenoser" wrote in message
| ...
| | Forgot to add.... there is a river that flows into the basin.....
| | Lots of ice flow........would the 2x4 be carried away?
| |
| |
| | "Capt. Mooron" wrote in message
| | ...
| | Polyprop floating line .... about 20 feet. A piece of 2x4 about a
foot
| | long
| | with a hole drilled through the center.
| | Run the rope through the 2x4 and tie it off... put the other end on
| the
| | chain for your mooring. Toss the works over and pick it up at low
tide
| | next
| | year with a boat hook.
| |
| | Works every time....
| |
| |
| | CM
| |
| |
| |
| | "Bluenoser" wrote in message
| | ...
| | | Getting ready to drop my mooring for the winter.......
| | |
| | | I'm just going to run a line from the chain to the shore.....
| | |
| | | Or I might get a smaller ball so it is below the ice...
| | |
| | | Any radical/new ways of doing this?
| | |
| | | Tomek
| | |
| | |
| |
| |
| |
| |
|
|
|
|

Thanks for your input.....as always....
If you need crew........ to return Overproof give me a shout.....

Tomek

"Capt. Mooron" wrote in message
...
No.. that's not a big issue. If it happens you can still find the chain
by
the floating line remaining. Our tides are 7 feet.
In ice... long lines and buoys get dragged and ripped. Short lines and
small
blocks of wood.

Plus I can always dive it for Tomek next spring for a bottle of air and a
bottle of rum. ;-)


CM

"Scott Vernon" wrote in message
...
| Don't you worry about a motor boat running over it?
|
|
| "Capt. Mooron" wrote in message
| ...
| If it does get torn off.... you still have 20 feet of floating line
| [yellow/
| 1/2"] to snag. That won't rip off. It would be a rare occasion to
remove
| the
| 2x4.... but I've seen it happen with 7 feet of ice and -45 temp all
| winter.
|
| CM
|
| "Bluenoser" wrote in message
| ...
| | Forgot to add.... there is a river that flows into the basin.....
| | Lots of ice flow........would the 2x4 be carried away?
| |
| |
| | "Capt. Mooron" wrote in message
| | ...
| | Polyprop floating line .... about 20 feet. A piece of 2x4 about a
foot
| | long
| | with a hole drilled through the center.
| | Run the rope through the 2x4 and tie it off... put the other end
on
| the
| | chain for your mooring. Toss the works over and pick it up at low
tide
| | next
| | year with a boat hook.
| |
| | Works every time....
| |
| |
| | CM
| |
| |
| |
| | "Bluenoser" wrote in message
| | ...
| | | Getting ready to drop my mooring for the winter.......
| | |
| | | I'm just going to run a line from the chain to the shore.....
| | |
| | | Or I might get a smaller ball so it is below the ice...
| | |
| | | Any radical/new ways of doing this?
| | |
| | | Tomek
| | |
| | |
| |
| |
| |
| |
|
|
|
|