Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Mike Woodall
 
Posts: n/a
Default FS: Buccaneer 18 in DFW area

All,

I am in the DFW area (Plano). The following should give you most of
the poop on the boat. Please contact me for anything further. I have
had this boat for many years, over 10 at least. I bought it with a
approximate 8 inch hole in the hull side. This was repaired by a
couple of friends who build fiberglass composite aircraft. They did a
first rate job. The hull was painted red a few years ago. The boat is
in overall good shape. I am in the finishing stages of building new
forward hatch covers out of marine grade okuume ply. They will be very
nice addition over the original covers.

1978 Chrysler C-18 Buccaneer $1500
Hull# CBC52020M78G
Low mast step
Round bailers do not leak
Bottom of hull has taken on slight indent from trailer bunk runners
Not spinnaker equipped
No jib furling - jib hanks onto forestay
Mast in great shape
Mainsail in good shape - not as crisp - Race number 2764
Jibsail in very good shape - still crisp
Clean title - Boat and trailer recently registered
Dilly trailer - heavy duty for this boat, tilt bed
Harry's book included

thanks,
Mike
972-867-2301


----------------------------------------------------------------------
rec.boats.marketplace is a moderated newsgroup. See rules and legal
disclaimer at http://www.algebra.com/rbm

  #2   Report Post  
Mike Woodall
 
Posts: n/a
Default FS: Buccaneer 18 in DFW area

All,

I am in the DFW area (Plano). The following should give you most of the
poop on the boat. Please contact me for anything further. I have had
this boat for many years, over 10 at least. I bought it with a
approximate 8 inch hole in the hull side. This was repaired by a couple
of friends who build fiberglass composite aircraft. They did a first
rate job. The hull was painted red a few years ago. The boat is in
overall good shape. I am in the finishing stages of building new forward
hatch covers out of marine grade okuume ply. They will be very nice
addition over the original covers.

1978 Chrysler C-18 Buccaneer $1500
Hull# CBC52020M78G
Low mast step
Round bailers do not leak
Bottom of hull has taken on slight indent from trailer bunk runners Not
spinnaker equipped
No jib furling - jib hanks onto forestay Mast in great shape Mainsail in
good shape - not as crisp - Race number 2764 Jibsail in very good shape
- still crisp Clean title - Boat and trailer recently registered Dilly
trailer - heavy duty for this boat, tilt bed Harry's book included

thanks,
Mike
972-867-2301


----------------------------------------------------------------------
rec.boats.marketplace is a moderated newsgroup. See rules and legal
disclaimer at http://www.algebra.com/rbm

Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is Off
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Buccaneer X-tra Wide Plans now available. Matt Langenfeld Boat Building 0 April 8th 04 01:24 AM
Muds treatment of careenage area ooxbow95 Cruising 5 September 25th 03 06:49 AM
Muds treatment of careenage area ooxbow95 General 12 September 20th 03 12:20 PM
Volunteers Needed To Locate Radio Pirate, Tampa Bay Area Boating Safety Comm Volunteers General 14 August 22nd 03 01:43 AM


All times are GMT +1. The time now is 11:44 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 BoatBanter.com.
The comments are property of their posters.
 

About Us

"It's about Boats"

 

Copyright © 2017