Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #31   Report Post  
posted to rec.boats
external usenet poster
 
First recorded activity by BoatBanter: Jul 2006
Posts: 5,091
Default Ping: justwaitafrekinmin


"Reginald P. Smithers III, Esq. LLC" wrote in
message . ..

The only negative is you have to watch out for waves whenever you back
down on it.





LOL

My oldest son is in the process of buying a "beach house" near the Cape.
It's right on the water with deeded beach rights on the lower part of Cape
Cod Bay.

This past weekend he went over to Bass Pro with intentions of buying a small
(12'-14') fresh water aluminum boat and engine to use at his new place.
(This is the son that gets sea sick in a bathtub and knows virtually nothing
about boating).

Anyway, last night we had quite a long discussion about small boats,
freeboard, the differences between a fresh water pond or lake boat and a
boat designed for the ocean. We discussed "fetch" and the wind's affect on
sea state. I explained that his house is situated in an area where the
normal, prevailing SW summer wind has very little water to whip up and
that's the reason the Bay behind his new house looked so calm the couple of
times he has seen it. I got a chart out and showed him what happens when
the wind shifts to the NE or N, especially following a remote, offshore
storm and the hundreds of miles of water available to fetch, arriving ashore
in his backyard.

Then we discussed flat bottomed aluminum boats with no drains or scuppers to
get rid of water taken over the low transom and gunnels.

I think he got the point. He's now thinking small Boston Whaler or
similar.

Eisboch


  #32   Report Post  
posted to rec.boats
external usenet poster
 
First recorded activity by BoatBanter: Oct 2007
Posts: 7,892
Default Ping: justwaitafrekinmin

On Aug 5, 8:22*am, hk wrote:
D.Duck wrote:
"Eisboch" wrote in message
...
"hk" wrote in message
...
Eisboch wrote:
wrote in message
m...


And, the Chinese have truly mastered the art of making good quality,
production
wooden instruments. Look around inside a current Chinese archtop guitar
with a
mirror and the insides are CLEAN. Nothing ragged, no glue runs showing.
Just
like any well made guitar.


To Harry's delight, I don't have a Chinese manufactured guitar to look
inside of. * :-)


Eisboch


I don't either. Mine was made in Spain.


I see no reason to support Chinese corporations or the multinational
corporations who shift manufacturing jobs to China.


It's amazing how lefty the righties get when $$ is involved. The righties
just *love* the Communists.


Methinks you delight in making chicken salad out of chicken ****. * Oh
.... excuse me *..... *chicken schitt.


Eisboch


Bravo....


There's little else in rec.boats these days but chicken schitters.- Hide quoted text -

- Show quoted text -


Yep, and you and your whiney little brother/lover are the worst
offenders.
  #33   Report Post  
posted to rec.boats
Jim Jim is offline
external usenet poster
 
First recorded activity by BoatBanter: Apr 2008
Posts: 487
Default Ping: justwaitafrekinmin


"Eisboch" wrote in message
...

"hk" wrote in message
...
Eisboch wrote:
wrote in message
...

And, the Chinese have truly mastered the art of making good quality,
production
wooden instruments. Look around inside a current Chinese archtop guitar
with a
mirror and the insides are CLEAN. Nothing ragged, no glue runs showing.
Just
like any well made guitar.




To Harry's delight, I don't have a Chinese manufactured guitar to look
inside of. :-)

Eisboch



I don't either. Mine was made in Spain.

I see no reason to support Chinese corporations or the multinational
corporations who shift manufacturing jobs to China.

It's amazing how lefty the righties get when $$ is involved. The righties
just *love* the Communists.



Methinks you delight in making chicken salad out of chicken ****. Oh
.... excuse me ..... chicken schitt.

Eisboch

That remark wasn't civil. But it was funny.

  #34   Report Post  
posted to rec.boats
Jim Jim is offline
external usenet poster
 
First recorded activity by BoatBanter: Apr 2008
Posts: 487
Default Ping: justwaitafrekinmin


"hk" wrote in message
...
D.Duck wrote:
"Eisboch" wrote in message
...
"hk" wrote in message
...
Eisboch wrote:
wrote in message
...

And, the Chinese have truly mastered the art of making good quality,
production
wooden instruments. Look around inside a current Chinese archtop
guitar with a
mirror and the insides are CLEAN. Nothing ragged, no glue runs
showing. Just
like any well made guitar.



To Harry's delight, I don't have a Chinese manufactured guitar to look
inside of. :-)

Eisboch

I don't either. Mine was made in Spain.

I see no reason to support Chinese corporations or the multinational
corporations who shift manufacturing jobs to China.

It's amazing how lefty the righties get when $$ is involved. The
righties just *love* the Communists.

Methinks you delight in making chicken salad out of chicken ****. Oh
.... excuse me ..... chicken schitt.

Eisboch



Bravo....



There's little else in rec.boats these days but chicken schitters.


That remark wasn't civil.

  #35   Report Post  
posted to rec.boats
Jim Jim is offline
external usenet poster
 
First recorded activity by BoatBanter: Apr 2008
Posts: 487
Default Ping: justwaitafrekinmin


wrote in message
...
On Tue, 5 Aug 2008 10:05:52 -0400, "Jim" wrote:


"hk" wrote in message
...
D.Duck wrote:
"Eisboch" wrote in message
...
"hk" wrote in message
...
Eisboch wrote:
wrote in message
...

And, the Chinese have truly mastered the art of making good
quality,
production
wooden instruments. Look around inside a current Chinese archtop
guitar with a
mirror and the insides are CLEAN. Nothing ragged, no glue runs
showing. Just
like any well made guitar.



To Harry's delight, I don't have a Chinese manufactured guitar to
look
inside of. :-)

Eisboch

I don't either. Mine was made in Spain.

I see no reason to support Chinese corporations or the multinational
corporations who shift manufacturing jobs to China.

It's amazing how lefty the righties get when $$ is involved. The
righties just *love* the Communists.

Methinks you delight in making chicken salad out of chicken ****. Oh
.... excuse me ..... chicken schitt.

Eisboch


Bravo....


There's little else in rec.boats these days but chicken schitters.


That remark wasn't civil.


What, are you ****ing RAINMAN, or something.


That remark wasn't civil



  #36   Report Post  
posted to rec.boats
Senior Member
 
First recorded activity by BoatBanter: Apr 2007
Posts: 7,590
Default Ping: justwaitafrekinmin

On Aug 5, 10:59*am, "Jim" wrote:
wrote in message

...



On Tue, 5 Aug 2008 10:05:52 -0400, "Jim" wrote:


"hk" wrote in message
...
D.Duck wrote:
"Eisboch" wrote in message
...
"hk" wrote in message
...
Eisboch wrote:
wrote in message
news:29ag94t60122lr0p59rbov127mfj6sqgpu@4ax .com...


And, the Chinese have truly mastered the art of making good
quality,
production
wooden instruments. Look around inside a current Chinese archtop
guitar with a
mirror and the insides are CLEAN. Nothing ragged, no glue runs
showing. Just
like any well made guitar.


To Harry's delight, I don't have a Chinese manufactured guitar to
look
inside of. * :-)


Eisboch


I don't either. Mine was made in Spain.


I see no reason to support Chinese corporations or the multinational
corporations who shift manufacturing jobs to China.


It's amazing how lefty the righties get when $$ is involved. The
righties just *love* the Communists.


Methinks you delight in making chicken salad out of chicken ****. * Oh
.... excuse me *..... *chicken schitt.


Eisboch


Bravo....


There's little else in rec.boats these days but chicken schitters.


That remark wasn't civil.


What, are you ****ing RAINMAN, or something.


That remark wasn't civil- Hide quoted text -

- Show quoted text -


Keep it up Jim, he is getting frustrated, you can always tell by the
vulgarity.
  #37   Report Post  
posted to rec.boats
external usenet poster
 
First recorded activity by BoatBanter: Mar 2008
Posts: 1,643
Default Ping: justwaitafrekinmin

On Tue, 5 Aug 2008 10:05:52 -0400, "Jim" wrote:


"hk" wrote in message
...
D.Duck wrote:
"Eisboch" wrote in message
...
"hk" wrote in message
...
Eisboch wrote:
wrote in message
...

And, the Chinese have truly mastered the art of making good quality,
production
wooden instruments. Look around inside a current Chinese archtop
guitar with a
mirror and the insides are CLEAN. Nothing ragged, no glue runs
showing. Just
like any well made guitar.



To Harry's delight, I don't have a Chinese manufactured guitar to look
inside of. :-)

Eisboch

I don't either. Mine was made in Spain.

I see no reason to support Chinese corporations or the multinational
corporations who shift manufacturing jobs to China.

It's amazing how lefty the righties get when $$ is involved. The
righties just *love* the Communists.

Methinks you delight in making chicken salad out of chicken ****. Oh

.... excuse me ..... chicken schitt.
Bravo....


There's little else in rec.boats these days but chicken schitters.


That remark wasn't civil.


Civil is as civil does. :)
  #38   Report Post  
posted to rec.boats
Jim Jim is offline
external usenet poster
 
First recorded activity by BoatBanter: Apr 2008
Posts: 487
Default Ping: justwaitafrekinmin


wrote in message
...
On Tue, 5 Aug 2008 10:59:58 -0400, "Jim" wrote:


wrote in message
. ..
On Tue, 5 Aug 2008 10:05:52 -0400, "Jim" wrote:


"hk" wrote in message
...
D.Duck wrote:
"Eisboch" wrote in message
...
"hk" wrote in message
...
Eisboch wrote:
wrote in message
...

And, the Chinese have truly mastered the art of making good
quality,
production
wooden instruments. Look around inside a current Chinese archtop
guitar with a
mirror and the insides are CLEAN. Nothing ragged, no glue runs
showing. Just
like any well made guitar.



To Harry's delight, I don't have a Chinese manufactured guitar to
look
inside of. :-)

Eisboch

I don't either. Mine was made in Spain.

I see no reason to support Chinese corporations or the
multinational
corporations who shift manufacturing jobs to China.

It's amazing how lefty the righties get when $$ is involved. The
righties just *love* the Communists.

Methinks you delight in making chicken salad out of chicken ****.
Oh
.... excuse me ..... chicken schitt.

Eisboch


Bravo....


There's little else in rec.boats these days but chicken schitters.

That remark wasn't civil.

What, are you ****ing RAINMAN, or something.


That remark wasn't civil


Do you get your underwear at K-Mart?

That remark wasn't civil, troll.

  #39   Report Post  
posted to rec.boats
Senior Member
 
First recorded activity by BoatBanter: Apr 2007
Posts: 7,590
Default Ping: justwaitafrekinmin

On Aug 5, 12:50*pm, wrote:
On Tue, 5 Aug 2008 08:30:50 -0700 (PDT),





wrote:
On Aug 5, 10:59*am, "Jim" wrote:
wrote in message


. ..


On Tue, 5 Aug 2008 10:05:52 -0400, "Jim" wrote:


"hk" wrote in message
...
D.Duck wrote:
"Eisboch" wrote in message
...
"hk" wrote in message
...
Eisboch wrote:
wrote in message
news:29ag94t60122lr0p59rbov127mfj6sqgpu@4ax .com...


And, the Chinese have truly mastered the art of making good
quality,
production
wooden instruments. Look around inside a current Chinese archtop
guitar with a
mirror and the insides are CLEAN. Nothing ragged, no glue runs
showing. Just
like any well made guitar.


To Harry's delight, I don't have a Chinese manufactured guitar to
look
inside of. * :-)


Eisboch


I don't either. Mine was made in Spain.


I see no reason to support Chinese corporations or the multinational
corporations who shift manufacturing jobs to China.


It's amazing how lefty the righties get when $$ is involved. The
righties just *love* the Communists.


Methinks you delight in making chicken salad out of chicken ****.. * Oh
.... excuse me *..... *chicken schitt.


Eisboch


Bravo....


There's little else in rec.boats these days but chicken schitters.


That remark wasn't civil.


What, are you ****ing RAINMAN, or something.


That remark wasn't civil- Hide quoted text -


- Show quoted text -


Keep it up Jim, he is getting frustrated, you can always tell by the
vulgarity.


You are an idiot, Ingersoll. Do you think what he is doing will cauase
me to change my behavior to suit him, or will it lead things in the
opposite direction. He sure doesn't have what it takes to drive me
away. He's just a twerp like you, except maybe a hair more literate.- Hide quoted text -

- Show quoted text -


Wow,, you are a real hero.....
  #40   Report Post  
posted to rec.boats
external usenet poster
 
First recorded activity by BoatBanter: Oct 2007
Posts: 7,892
Default Ping: justwaitafrekinmin

On Aug 5, 11:30*am, wrote:
On Aug 5, 10:59*am, "Jim" wrote:





wrote in message


.. .


On Tue, 5 Aug 2008 10:05:52 -0400, "Jim" wrote:


"hk" wrote in message
...
D.Duck wrote:
"Eisboch" wrote in message
...
"hk" wrote in message
...
Eisboch wrote:
wrote in message
news:29ag94t60122lr0p59rbov127mfj6sqgpu@4ax .com...


And, the Chinese have truly mastered the art of making good
quality,
production
wooden instruments. Look around inside a current Chinese archtop
guitar with a
mirror and the insides are CLEAN. Nothing ragged, no glue runs
showing. Just
like any well made guitar.


To Harry's delight, I don't have a Chinese manufactured guitar to
look
inside of. * :-)


Eisboch


I don't either. Mine was made in Spain.


I see no reason to support Chinese corporations or the multinational
corporations who shift manufacturing jobs to China.


It's amazing how lefty the righties get when $$ is involved. The
righties just *love* the Communists.


Methinks you delight in making chicken salad out of chicken ****. * Oh
.... excuse me *..... *chicken schitt.


Eisboch


Bravo....


There's little else in rec.boats these days but chicken schitters.


That remark wasn't civil.


What, are you ****ing RAINMAN, or something.


That remark wasn't civil- Hide quoted text -


- Show quoted text -


Keep it up Jim, he is getting frustrated, you can always tell by the
vulgarity.- Hide quoted text -

- Show quoted text -


Yeah, when he gets frustrated that his brain just doesn't function
well, he'll start showing us what a low life he can be!
Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is Off
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Ping: RG RCE General 2 February 8th 06 07:48 PM
PING DSK! Doug Kanter General 5 June 8th 05 08:10 PM
PING: Oz1 Seahag ASA 10 June 9th 04 11:13 AM
PING Bob Capt. Mooron ASA 6 October 28th 03 11:45 PM


All times are GMT +1. The time now is 09:51 AM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 BoatBanter.com.
The comments are property of their posters.
 

About Us

"It's about Boats"

 

Copyright © 2017