"Geoff" wrote in message
news:381219_304c08e7ace62127a9d6abb97696a250@boati ngforumz.com...

I have a sea ray with 4.3 mercruiser, the boat was running fine all
season until 2 weeks ago. It will run fine if you keep it around 2,000
rpms but then when you start to go faster, it will surge from 3,000
rpms to 4,000 and continue to do that until it stalls out. Its not the
prop, the prop was changed at the beginning of the season and is still
in good shape. Its also not water in the fuel because the fuel tank
has been drain and fuel and water separator filter has been changed.
I’m really lost on this one.


Except for the stalling, your symptoms still sound like a spun hub on the
prop .... even if it is new. At lower RPM the rubber hub is still spinning
the prop, will look and feel fine when you inspect it, but it loses it's
grip at higher RPM. However, it doesn't explain stalling.

Is the engine carburated or fuel injected?

Eisboch