You asked about where the B260 'ducer was installed on that Parker. Here
is a note from the boat's owner:

"I had it installed when I got the boat. It has the high speed fairing
block and is mounted about 18 inches in front of the transom and about a
foot off center on the starboard side. Those are just guesses. I can
check and measure if it will help you. I think there is a better ducer
out now. Not sure what number it is, but I hear it's about the same as
far as quality but it has a larger cone angle on the hi freq 200 that
matches the cone angle of the low freq 50."

H.

On Fri, 18 Jan 2008 09:30:14 -0500, HK wrote:

"I had it installed when I got the boat. It has the high speed fairing
block and is mounted about 18 inches in front of the transom and about a
foot off center on the starboard side. Those are just guesses. I can
check and measure if it will help you. I think there is a better ducer
out now. Not sure what number it is, but I hear it's about the same as
far as quality but it has a larger cone angle on the hi freq 200 that
matches the cone angle of the low freq 50."

Why bother with all that. I have the Airmar dual frequency transducer
shooting through the hull of the Grand Banks. The hull is about an
inch of solid fiberglass and it works fine up to about 1700 feet of
water.

Wayne.B wrote:
On Fri, 18 Jan 2008 09:30:14 -0500, HK wrote:

"I had it installed when I got the boat. It has the high speed fairing
block and is mounted about 18 inches in front of the transom and about a
foot off center on the starboard side. Those are just guesses. I can
check and measure if it will help you. I think there is a better ducer
out now. Not sure what number it is, but I hear it's about the same as
far as quality but it has a larger cone angle on the hi freq 200 that
matches the cone angle of the low freq 50."

Why bother with all that. I have the Airmar dual frequency transducer
shooting through the hull of the Grand Banks. The hull is about an
inch of solid fiberglass and it works fine up to about 1700 feet of
water.


"Why bother with all that."

You are indeed an arrogant a**hole.

Fish for tuna much off that RV, D'wine?

harry krause wrote:
Wayne.B wrote:
On Fri, 18 Jan 2008 09:30:14 -0500, HK wrote:

"I had it installed when I got the boat. It has the high speed
fairing block and is mounted about 18 inches in front of the transom
and about a foot off center on the starboard side. Those are just
guesses. I can check and measure if it will help you. I think there
is a better ducer out now. Not sure what number it is, but I hear
it's about the same as far as quality but it has a larger cone angle
on the hi freq 200 that matches the cone angle of the low freq 50."

Why bother with all that. I have the Airmar dual frequency transducer
shooting through the hull of the Grand Banks. The hull is about an
inch of solid fiberglass and it works fine up to about 1700 feet of
water.


"Why bother with all that."

You are indeed an arrogant a**hole.

Fish for tuna much off that RV, D'wine?


Harry,
You really want to be very careful calling anyhone an arrogant asshole,
you know what they say about glass houses and what not.

Reginald P. Smithers III wrote:
harry krause wrote:
Wayne.B wrote:
On Fri, 18 Jan 2008 09:30:14 -0500, HK wrote:

"I had it installed when I got the boat. It has the high speed
fairing block and is mounted about 18 inches in front of the transom
and about a foot off center on the starboard side. Those are just
guesses. I can check and measure if it will help you. I think there
is a better ducer out now. Not sure what number it is, but I hear
it's about the same as far as quality but it has a larger cone angle
on the hi freq 200 that matches the cone angle of the low freq 50."

Why bother with all that. I have the Airmar dual frequency transducer
shooting through the hull of the Grand Banks. The hull is about an
inch of solid fiberglass and it works fine up to about 1700 feet of
water.


"Why bother with all that."

You are indeed an arrogant a**hole.

Fish for tuna much off that RV, D'wine?


Harry,
You really want to be very careful calling anyhone an arrogant asshole,
you know what they say about glass houses and what not.

He's oblivious to that. Part of the narcissism.

On Fri, 18 Jan 2008 22:03:06 -0500, Dan
wrote:

Harry,
You really want to be very careful calling anyhone an arrogant asshole,
you know what they say about glass houses and what not.

He's oblivious to that. Part of the narcissism.

Which is the counter balance to his low self esteem, something to do
with disappointing his father no doubt. That's why he's just a bit
touchy about his low transom and all that. So sad.