"Short Wave Sportfishing" wrote in message
...
On Fri, 9 Nov 2007 15:11:40 -0400, "Don White"
wrote:

My problem was an incompetent mechanic

Well, there's your problem. I had suspicions when he flagged those
chain retainers as "bad".

That was mechanic #2 for the provincial MVI.
The 'inspector' for imported vehicles works for a national hardware/tire &
auto parts store.
Somehow Canadian Tire Corp got the contract to do this work.
You'll get a kick out of this.......
I asked him about the odd inspection date notation... it looked like Nov 20
2007 rather than Sept 20 2007.
He re-wrote it on my copy as ..you guessed it.. Nov 20 2007...
I asked him why. and he said that's when he sent the 2nd fax. I reminded
him that was impossible and he got riled up. (We expect some snow this
weekend and everybody & their dog wants their snow tires mounted now making
the garage a tad busy).
He grumbled that he never had any trouble with trailers before and stapled
his business card to the form...saying they can call him if they have any
more problems.
So he faxes the form again with Nov 20 as the inspection date. If I get
gov't grief on this...I'll go directly to the store manager. I gave the
inspector a break because I went to school with one of his uncles...... but
I can only suffer him so much.

"Don White" wrote in message
...

"Canuck57" wrote in message
news:8V0Zi.194527$1y4.185067@pd7urf2no...

"Don White" wrote in message
...
Lord thunderin' Jesus......
what a hassle over a $500.00 used boat trailer.
After having two inspections done... one federal and the other
provincial.. and the form being faxed four times to the Registar of
Imported Vehicles....
I received a letter today threatening me with a $2K fine and six months
in jail if I didn't send the trailer back to the US.

problems...
..the original form had a 'best before date ' of Oct 19 and by the time
the 3rd & 4th copies were faxed... the due date was passed
..The mechanic put some kind of secret code to represent the date he did
the inspection.. not deciphrable by me or the gov't people
..mechanic didn't tick boxes or add info that referred to lights, tire
manufacturer, tire type max load rating or inflation pressure
This will be my 4th visit to the garage and the 5th fax sent.
#$$%%$^$%# gov't crap.
They could have at least told me the problems instead of just saying
they didn't have the form. Hell, I would have had it re-tested at
another Canadian Tire store.
Don't even ask me how hard it is to reach them by phone...............

So what did you do wrong? Me, I have 2 cars behind me now and not a
single unanticipated issue. In fact a friend is driving back with a
Florida garage kept BMW right now.

Me, went to local dealer, he quoted $38K for a 1 year old boat that he
states only has 2 hours on it. I can get a 2008 never been used for $22K
US. Going to see in January when GST drops, if I don't get too tempted
to do it sooner.

For boats, it is simple:

1) Do your research. For example make sure the boat manufacturer will
supply the Canadian coast guard tag. Maxim for example, $71 US to get
it. Another is if the motor is made in Japan, add 6.1% (duty) to your
cost calculations. Or alternatively you have to get some kind of marine
certification. But if a Merc made in Wisconsin, no duty. Almost every
boat is US/Can/MX made, but check anyway.

2) You have to buy it outright to get clear ownership. Get separate
receipts for motor, boat and trailer. Make sure it adds the same as your
total bill of sale.

3) Go to the border, pay the RIV the $209 or whatever. Pay GST (and PST
if your in a province that has it). In Alberta there is also a day in
transit license of $24.95 or something until you get real plates.

4) Get the trailer inspected, I shouldn't have much issues here as it is
new and identical to Canadian versions.

5) Get plates, get the numbers for the hull and go fishing. (in the
spring of course).

My guess though is at $500 you got something that is not seaworthy, a
trailer with bald tires and a severely rusted frame. Useful for parts at
best. Probably late with the paperwork too.

And as most boaters know, better to buy a good motor as no manufacturer
comes out to the lake to fix it.

I did everything corectly and to the letter of the law. the boat trailer
is in 'like new' condition.... a 2005 galvanized model lovingly cared for
by its former owner.
My problem was an incompetent mechanic and bureaucratic bungling.

Canadian Tire??

I always tell them right up front, anything they find and I will take it to
a dealer or specialist. I mystifies me why "government" should recommend a
specific private entity when any properly licensed mechanic will do. I
wonder if RIV employees own any Canadian Tire stock? (CTC.TO)

On Nov 9, 12:37 pm, "Canuck57" wrote:
"Don White" wrote in message

My guess though is at $500 you got something that is not seaworthy, a
trailer with bald tires and a severely rusted frame.

That would be a very crappy guess........
No cigar!

On Fri, 09 Nov 2007 17:37:08 GMT, "Canuck57"
wrote:

My guess though is at $500 you got something that is not seaworthy, a
trailer with bald tires and a severely rusted frame. Useful for parts at
best. Probably late with the paperwork too.

And your guess would be so freakin' wrong it would make your head spin
in circles.

"Short Wave Sportfishing" wrote in message
...
On Fri, 09 Nov 2007 17:37:08 GMT, "Canuck57"
wrote:

My guess though is at $500 you got something that is not seaworthy, a
trailer with bald tires and a severely rusted frame. Useful for parts at
best. Probably late with the paperwork too.

And your guess would be so freakin' wrong it would make your head spin
in circles.

I'll show him a picture to clarify.
He may even think I got the whole package for $500.00........
note: the $500 was only a value I asigned to the trailer portion of the
boat/motor/trailer combo.
http://img.photobucket.com/albums/v2...nsenumbers.jpg

"Don White" wrote in message
...

"Short Wave Sportfishing" wrote in message
...
On Fri, 09 Nov 2007 17:37:08 GMT, "Canuck57"
wrote:

My guess though is at $500 you got something that is not seaworthy, a
trailer with bald tires and a severely rusted frame. Useful for parts at
best. Probably late with the paperwork too.

And your guess would be so freakin' wrong it would make your head spin
in circles.

I'll show him a picture to clarify.
He may even think I got the whole package for $500.00........
note: the $500 was only a value I asigned to the trailer portion of the
boat/motor/trailer combo.


d'oh..
http://img.photobucket.com/albums/v2...nsenumbers.jpg

Hey Tom... if I decided to move up a step... that's a 40 hp ETEC
listed locally at $14.5K
http://www.whitewatermarine.ns.ca/im...20x%20450).jpg

On Fri, 9 Nov 2007 19:43:14 -0400, "Don White"
wrote:

Hey Tom... if I decided to move up a step... that's a 40 hp ETEC
listed locally at $14.5K
http://www.whitewatermarine.ns.ca/im...20x%20450).jpg

I almost bought one of those when I bought your boat.

Very nice boat.

On Fri, 9 Nov 07, "Don White" wrote:
Hey Tom... if I decided to move up a step... that's a 40 hp ETEC
listed locally at $14.5K
http://www.whitewatermarine.ns.ca/im...20x%20450).jpg
I'm getting a page that says:
"Welcome to Eastlink"
"The resource you are looking for cannot be found, does not exist, or
has moved. Please contact the web site administrator"

Rick

On Fri, 09 Nov 2007 20:35:11 -0600, lid wrote:

http://www.whitewatermarine.ns.ca/im...20x%20450).jpg

Try this:

http://tinyurl.com/2pqwjh