"Dan" intrceptor@gmaildotcom wrote in message
.. .
Don White wrote:
"Don White" wrote in message
...
"Short Wave Sportfishing" wrote in message
...
Those keys get there yet?

Sorry folks - I lost Don't email addy.


Woo hoo! Noticed our mailman walking up to my door as I was reading this
newsgroup.
Sure enough, he delivered your envelope with the two keys and the
Lowrance manual.
First thing, I went out and tried the keys...they were a bit tight so I
flushed the locks with WD40 and will followup with lock graphite when
they dry out.
Question..re spare wheel lock... do I 'screw off' the two pieces of
angled metal?? I've applied WD40 to loosen any corrosion before
attempting.

re Lowrance sonar
The manual doesn't show one single picture of a transducer...
I want to make sure it's pointing the proper way.
It seems like the 'eye' is at the end of the bullet shaped unit pointing
aft.
On the other hand it would make more sense if the transducer was
positioned in its more streamlined position...as it is now.
note: the bracket doesn't allow me to turn the unit enough do that the
somewhat pointy end is straight up and the flat bottom is down.

I've never owned a depth sounder so these questions may seem silly... but
I do want it set up correctly.




Try email, Don.


Try minding your own business Dingy Dan.

Don White wrote:
"Dan" intrceptor@gmaildotcom wrote in message
.. .
Don White wrote:
"Don White" wrote in message
...
"Short Wave Sportfishing" wrote in message
...
Those keys get there yet?

Sorry folks - I lost Don't email addy.
Woo hoo! Noticed our mailman walking up to my door as I was reading this
newsgroup.
Sure enough, he delivered your envelope with the two keys and the
Lowrance manual.
First thing, I went out and tried the keys...they were a bit tight so I
flushed the locks with WD40 and will followup with lock graphite when
they dry out.
Question..re spare wheel lock... do I 'screw off' the two pieces of
angled metal?? I've applied WD40 to loosen any corrosion before
attempting.

re Lowrance sonar
The manual doesn't show one single picture of a transducer...
I want to make sure it's pointing the proper way.
It seems like the 'eye' is at the end of the bullet shaped unit pointing
aft.
On the other hand it would make more sense if the transducer was
positioned in its more streamlined position...as it is now.
note: the bracket doesn't allow me to turn the unit enough do that the
somewhat pointy end is straight up and the flat bottom is down.

I've never owned a depth sounder so these questions may seem silly... but
I do want it set up correctly.



Try email, Don.


Try minding your own business Dingy Dan.



Listen, Dumbass Don. Your posts here are public and *maybe* there are
(a lot) of people that could care less about your boat keys.

"Dan" intrceptor@gmaildotcom wrote in message
.. .
Don White wrote:
"Dan" intrceptor@gmaildotcom wrote in message
.. .
Don White wrote:
"Don White" wrote in message
...
"Short Wave Sportfishing" wrote in message
...
Those keys get there yet?

Sorry folks - I lost Don't email addy.
Woo hoo! Noticed our mailman walking up to my door as I was reading
this newsgroup.
Sure enough, he delivered your envelope with the two keys and the
Lowrance manual.
First thing, I went out and tried the keys...they were a bit tight so I
flushed the locks with WD40 and will followup with lock graphite when
they dry out.
Question..re spare wheel lock... do I 'screw off' the two pieces of
angled metal?? I've applied WD40 to loosen any corrosion before
attempting.

re Lowrance sonar
The manual doesn't show one single picture of a transducer...
I want to make sure it's pointing the proper way.
It seems like the 'eye' is at the end of the bullet shaped unit
pointing aft.
On the other hand it would make more sense if the transducer was
positioned in its more streamlined position...as it is now.
note: the bracket doesn't allow me to turn the unit enough do that the
somewhat pointy end is straight up and the flat bottom is down.

I've never owned a depth sounder so these questions may seem silly...
but I do want it set up correctly.



Try email, Don.


Try minding your own business Dingy Dan.

Listen, Dumbass Don. Your posts here are public and *maybe* there are (a
lot) of people that could care less about your boat keys.

Don't read my posts Dopey Dan. It'll save you a lot of aggravation.

Don White wrote:
"Dan" intrceptor@gmaildotcom wrote in message
.. .
Don White wrote:
"Dan" intrceptor@gmaildotcom wrote in message
.. .
Don White wrote:
"Don White" wrote in message
...
"Short Wave Sportfishing" wrote in message
...
Those keys get there yet?

Sorry folks - I lost Don't email addy.
Woo hoo! Noticed our mailman walking up to my door as I was reading
this newsgroup.
Sure enough, he delivered your envelope with the two keys and the
Lowrance manual.
First thing, I went out and tried the keys...they were a bit tight so I
flushed the locks with WD40 and will followup with lock graphite when
they dry out.
Question..re spare wheel lock... do I 'screw off' the two pieces of
angled metal?? I've applied WD40 to loosen any corrosion before
attempting.

re Lowrance sonar
The manual doesn't show one single picture of a transducer...
I want to make sure it's pointing the proper way.
It seems like the 'eye' is at the end of the bullet shaped unit
pointing aft.
On the other hand it would make more sense if the transducer was
positioned in its more streamlined position...as it is now.
note: the bracket doesn't allow me to turn the unit enough do that the
somewhat pointy end is straight up and the flat bottom is down.

I've never owned a depth sounder so these questions may seem silly...
but I do want it set up correctly.



Try email, Don.

Try minding your own business Dingy Dan.
Listen, Dumbass Don. Your posts here are public and *maybe* there are (a
lot) of people that could care less about your boat keys.

Don't read my posts Dopey Dan. It'll save you a lot of aggravation.



You don't get it, do you? This isn't a chat room.