Home |
Search |
Today's Posts |
|
#1
![]()
posted to rec.boats
|
|||
|
|||
![]()
Check the voltage at the gauges. There may be a problem when the load
increases. Old boats have lots of bad connections. Another possibility is that the alternator is doing something bad. Again check the voltage when running. sonofadocker wrote: My boat has sat idle for many years. it is 30 years old. Each day it is used it works better and better. my question is for the dash gauges. when my ignition key is moved to the accessory position all my gauges show true readings. as soon as the boat is started the fuel, power trim, engine temp all go to the far left. another new problem has been the starter. my cables are clean and connected properly. but i have to start the boat by jumping the starter with a screw driver. any help would be great. sonofadocker |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
rec.boats.paddle sea kayaking FAQ | General | |||
rec.boats.paddle sea kayaking FAQ | General | |||
Bought a Reinel 26' | ASA | |||
rec.boats.paddle sea kayaking FAQ | General | |||
rec.boats.paddle sea kayaking FAQ | General |