sonofadocker wrote:
My boat has sat idle for many years. it is 30 years old. Each day it is
used it works better and better.

my question is for the dash gauges.

when my ignition key is moved to the accessory position all my gauges
show true readings.
as soon as the boat is started the fuel, power trim, engine temp all go
to the far left.

another new problem has been the starter. my cables are clean and
connected properly. but i have to start the boat by jumping the starter
with a screw driver.

any help would be great.

sonofadocker


Starter solenoid on the starter.

Isn't it unusual for the gauges to work at all on ACC? You might see if
your ignition switch is miswired. Is the feed for the gauges is running
to the ACC contact instead of the RUN contact, and you're therefore
losing power to the gauges when you turn past ACC?

Also check your common ground.