About Us

wrote:
K. Smith wrote:

Eventually, BRP took the boat into their shop to diagnose the problem.
They came back in a week with the engine fixed, and claimed that the
rattle was the result of fuel starvation in the #1 cylinder caused by a
pinched fuel line. They claimed that the fuel line was kinked because
Twin Vee used a poor grade of fuel hose when they installed the motor.
BRP replaced the fuel hose, and the motor ran fine.

May or may not mean anything. What *else* did they do during the week
they had the engine besides replace a fuel hose with an internal
"pinch"? If anything?

It would be easy to do a quick rebuild on the #1 cylinder and then
return it with a story that there was a kinked fuel hose. "Look! We
replaced the fuel hose ((and secretly rebuilt the cylinder)) and it
runs fine!"

Or, if they admit rebuilding the cylinder and they blame the cause on a
constricted fuel supply line that isn't definitive, either. The rebuilt
engine ran fine when initially started up- but did as well for the
first umpteen hours on the (allegedly) constricted fuel line.

It's probably wrong to insist that skullduggery is the only explanation
for the restored performance of the engine after it was returned, but
it would be foolish to rule out the possibility entirely. More
information needed here. It would be interesting to know whether the
engine returned from the repair shop continues to run well, and for how
long.

It isn't insignificant that of two identical engines only one developed
a problem.

Certainly is on topic & hi.

Yes I agree skulduggery is not the only explanation, but certainly it's
a runner. The latest twist might be that BRP now demands the motor back
& powerboats are saying no way, which does add to the skulduggery
concerns??. (have you heard about this??)

Given it's a very public testing program by a magazine with a
subscription base to maintain, it seems funny BRP won't even allow
powerboats to talk to them about it???

I suppose if you were into conspiracy .................... there were
maybe 2 powerhead failures??? After all it had a knock in it!!!! &
"they" replaced the first powerhead??? are these things so prone to
failure they just replace the powerhead regardless??? so as to hush it up??

Funny thing is when Bass & Walleye ran "independent" tests on Bomb
engines that showed poor performance, high fuel consumption, higher
weights, higher prices,etc again the MO was to allege the testing was
bent, hmmmmmmmmmmmm seems so far ONLY the seller/spruikers can get good
results & on this alone their reliability claims are at the least to be
questioned???

There is a good story about this "story" for some brave boatring writer
in the US??:-) Can it be that only a subscription based mag will
actually do proper testing & reports??? is the "industry" that shallow,
even mild criticism is banned, on threat of no more co-op.

K

Thread Tools	Search this Thread
Show Printable Version	Search this Thread: Advanced Search
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
E-Tec problems?? well yes if you want the HP you pay for	K. Smith	General	47	March 3rd 06 09:31 PM
E-Tec problems dealers demand standards; so I'll play	K. Smith	General	3	March 3rd 06 03:45 PM
E-Tec - Whats your experience?	[email protected]	General	21	January 14th 06 06:25 AM
So where is......................	JimH	General	186	November 28th 05 02:29 PM

Menu

About Us