Gotcha... so I'll go with the assumption that all is well. I guess I can
wait a couple weeks until splash down to ease my mind.

Thanks for the info.




"trainfan1" wrote in message
news
wrote:
I have a 1:1 Velvet Drive Transmission. What are the little holes with
plugs on the casing with a little arrow pointing to them? Are these
spots
for lubrication beyond the transmission oil?

Are there any external adjustments that can be made to these
transmissions?
Last year I was experiencing some minor prop spins when it was in
neutral.
Yesterday, with a fresh rebuilt engine, the thing was spinning like mad
in
neutral. Realize, this was on land with no load (prop shaft not even
connected). I'm not sure if I simply needed to knock it into forward
and
reverse a few times. It's possible the clutch was maybe a little sticky
from no use for 12+ months?

Thanks -
Doug



Doug, those are alternate line connections, usually.

The output shaft will spin in neutral due to windage until the fluid
heats up, this is normal, and it will often "creep" around even at
operating temp. With the propshaft in, it will be less, and then even
more less in the water. DON'T put it into reverse - that's asking for
trouble. Always allow the shaft to come as close to stopping as
possible before shifting / changing directions.

Rob