Home |
Search |
Today's Posts |
#2
![]() |
|||
|
|||
![]()
Terry Haywood .said:.........
It's just a cable-can I make one myself or buy one at a car parts store? I am guessing there is nothing special about this distributor and it's the same thing GM put in cars. My problem is I don't know what to ask for (can't ask for a Volvo boat engine special tool at a car parts store). .." Terry- for sure NAPA auto parts stores can cross reference at least some marine/auto parts, I've done it. Start with the year (remember due to a lower volume of finished units many boat engines might be a year or two older than the hull, i.e. was sitting in a warehouse) and cubic inch and whether fuel injected or carb, etc. NEVER NEVER use auto electrical (starter, etc) or fuel (carb, fuel pumps etc) parts in a marine application due to fire/explosion concerns. Good luck Mike |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Volvo Penta 270 Outdrive, what can it be hooked up to? | General | |||
Volvo Penta harmonic balancer problem | General | |||
Volvo penta 270 outdrive, what can it be hooked up to? | General | |||
Volvo Penta aq125a firing order | General | |||
v-belts volvo penta 3.0 gs | General |