LinkBack Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #18   Report Post  
Terry Spragg
 
Posts: n/a
Default Continuos Duty Bilge Blowers

wrote:
I'm tired of replacing my bilge blowers, as these Atwood Continuous
Duty (continuous duty in a pigs eye), inline blowers only last one
season before they start squealing.

I probably use my blowers more than the average Joe, so I need a
blower that offers real, and reliable continuous duty.

I looked at this one, and it does look much more durable than the
little plastic inline blowers, but the motor doesn't look like it
would tolerate a salt environment, though I could be wrong.

http://www.greatoutdoors.com/go/prod...er/amback.com/


Any other recommendations?


Use the blower for safety before starting your explosion machine.
After it starts, it will suck air much faster than any vent fan can.
Turn it off. Do not pressurize the engine compartment, especially
if you have a leaky exhaust. Not that you could, you'd need a 50 hp
fan known on the drag strip as a blower or supercharger. Engine air
inducement might be conducted by deck vent. If too tightly sealed,
exhaust could accumulate in the engine compartment. A flame arrestor
metal filter grille on an engine room exhaust vent driven by engine
vacuum seems a good idea, needing only a vent into the engine
combustion intake. A sufficiently strong "Intake air leak" will
evacuate any but the most catastophic exhaust leak into the engine
compartment. Engine air intakes are noisy, and require a dust
filter, so go a little further and build an intake muffler filter
box. Place any such vent as high as possible in the engine
compartment, in case of flooding. Provide a watertigh closure for
submerged running, if you are fitting a schnorkel.

Use the leakage of air into the engine compartment as a cabin heat
circulation function, for instance, by placing the hot water
radiator in the bow. Fresh ventilation air could be drawn through a
heat exchanger incorperated into the engine compartment ventilation
/ combustion air intake filter, to improve efficiency in the heating
system. The heat exchanger might accept cold water for air
conditioning, which could be cooled by a keel radiator pipe. When
it's 130 (F) out, sea water temperature air will be blessedly cool
by comparison, and won't eat up much power.

Some will say you should try to be safer with a tight engine box.
Don't ever depend on a tight engine box alone for protection from
fumes and fire.

Terry K

 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is Off
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Water in the Bilge Ernie General 20 April 16th 04 04:20 AM
What's a Bilge Sponge Dionysus Feldman General 4 September 22nd 03 05:44 PM


All times are GMT +1. The time now is 04:45 AM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 BoatBanter.com.
The comments are property of their posters.
 

About Us

"It's about Boats"

 

Copyright © 2017