Home |
Search |
Today's Posts |
#1
|
|||
|
|||
Big Block Oil Consumption
New to boating-bought a '94 Baja 24 Outlaw with a new Mercruiser 7.4 Magnum
EFI long block. It has straight exhaust and Bravo One out drive. Boat runs perfect except for engine oil consumption. We have gone through 6+ quarts of Quicksilver 25W-40 in the first 20 hours. I have been very careful to follow Merc's break-in quide: no long periods of idle, no full-throttle starts. Every two-three hours, the dipstick reads a quart low. Now with 32 hours, a shop did a leak-down check. Four cylinders 10% which is spec., three were about 25% and one was about 40%. What do you recommend? What is normal oil consumption? Found about 1/2 quart in the bilge. The shop that installed the long block used an aftermarket block with all Merc parts (crank, bearings, rings, pistons, cam etc.) Thanks in advance. Jeff |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
City Isld <--> BLock Isld | ASA | |||
4 bold vs 2 Bolt block | General | |||
Fuel consumption -- Is it simply too much for a normal folf with a normal income? | General | |||
Are you a " Block head " ? | ASA | |||
Suggestions for replacing 5.7 V-8 Cracked Block | General |