| Home |
| Search |
| Today's Posts |
|
#1
|
|||
|
|||
|
I bought a Starter/Deep cycle combo with 800CCA and a brush to clean the
battery connectors. I cleaned the connectors and the boat started fine with my old 575 CCA deep cycle battery. I replaced it with my new battery and Im keeping the old in the boat for backup. Took her out for an hour and all is running beautifully. Leak question: Ever since I got the boat when you step down about 3 inches into the cuddy area (just has the bed thing)the floor was damp. Previous own said that it was always damp and thay he never figured out why. Well I did. When you pull the boat up out of the water if its still at a slant and you take the back plug out all is fine. If you pull the boat up onto a forward slanted surface, before you take theplug out you can see a little trickle stream of water coming into the cuddy area from where it meets the deck of the boat. I would assume this isnt supposed to happen and that it just be a leak right there from the water that the plug releases. Can I just cauk that up with something? I can take some pics of the area Im talking about tomorrow. I'll try to pull the carpet back tomorrow too and investigate further. '87 sea ray seville 19 foot --Cameron |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| power steering leak | General | |||
| Friday Ethics Question | General | |||
| Winterizing question plus. | General | |||
| Transom Height - Dumb Question Alert | General | |||