| Home |
| Search |
| Today's Posts |
|
#3
|
|||
|
|||
|
Tony, don't sound like anyone believes you with the 15hp = 1mph faster! I
do! "tony thomas" wrote in message news:PiKpe.27752$x96.17450@attbi_s72... Unless you are rebuilding the engine anyway, I would not waist my money. It takes a lot of hp to gain any real benefit on the water. Most quote 15 hp to 1 mph. Spend your money on a 350 assuming your boat is 18' or bigger. A 17' will probably run sideways from the torque. Biggest bang for the buck is usually found by going to a good performance SS prop. You can see 5 mph gain with the right prop over a cheap aluminum one. -- Tony my boats and cars at http://t.thomas.home.mchsi.com - "Gorf" wrote in message ... I have done some research and heard you can put higher compression flat-top pistons in the 4.3 and gain a few HP. Who makes these pistons? I have done a bunch of searches and come up empty handed. A related question, I have also read that the 4.3 is a 350 minus two cylinders and that the pistons and rods are the same. Is this true or false? -- John WWW.Firewalk-NC.com "Be the change you wish to see in others" ----Gandhi |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Boater wannabe questions (Pacific Northwest area) | General | |||
| Where's the poop questions? | General | |||
| Don't ask questions on boats - the Feds are watching! | General | |||
| Lots of questions :) | General | |||
| Newbie questions | UK Power Boats | |||