Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
 
Posts: n/a
Default Fuel Filter Question

Several years ago I bought an older boat with a 150 Yamaha, I found out
after several runs offshore that there was trash in the fuel tank because
the filter kept plugging up in choppy water. I told a friend that I was
going to get a bunch of larger universal fuel filters and just throw them
away until I get all the trash out of the fuel tank. The guy said not to use
paper filters because it filters the oil out of the gas. Is that true? Has
anyone else heard of that?
Thanks
Gary


  #2   Report Post  
Dan Krueger
 
Posts: n/a
Default

Oil filters are made of paper. Maybe the filter your discussed with him
is different. In any case, the Racor filters are the way to go. They
have a clear bowl at the bottom that will allow you to drain any water
from the filter and extend its life. These are made for marine use and
won't remove any oil in the process since they are made for that. They
will also screw on to a conventional filter fitting. Just make sure you
have a little extra room underneath for the bowl and to access it for
drainage. I always wondered how people would know when the other
filters were full of water and needed changing.

More info...

http://www.parker.com/racor/spn_product.html

Dan


wrote:

Several years ago I bought an older boat with a 150 Yamaha, I found out
after several runs offshore that there was trash in the fuel tank because
the filter kept plugging up in choppy water. I told a friend that I was
going to get a bunch of larger universal fuel filters and just throw them
away until I get all the trash out of the fuel tank. The guy said not to use
paper filters because it filters the oil out of the gas. Is that true? Has
anyone else heard of that?
Thanks
Gary


  #3   Report Post  
John H
 
Posts: n/a
Default

On Mon, 16 May 2005 23:40:29 GMT, Dan Krueger
wrote:

Oil filters are made of paper. Maybe the filter your discussed with him
is different. In any case, the Racor filters are the way to go. They
have a clear bowl at the bottom that will allow you to drain any water
from the filter and extend its life. These are made for marine use and
won't remove any oil in the process since they are made for that. They
will also screw on to a conventional filter fitting. Just make sure you
have a little extra room underneath for the bowl and to access it for
drainage. I always wondered how people would know when the other
filters were full of water and needed changing.

More info...

http://www.parker.com/racor/spn_product.html

Dan


wrote:

Several years ago I bought an older boat with a 150 Yamaha, I found out
after several runs offshore that there was trash in the fuel tank because
the filter kept plugging up in choppy water. I told a friend that I was
going to get a bunch of larger universal fuel filters and just throw them
away until I get all the trash out of the fuel tank. The guy said not to use
paper filters because it filters the oil out of the gas. Is that true? Has
anyone else heard of that?
Thanks
Gary


Which of those do you use, Dan?
--
John H

"All decisions are the result of binary thinking."
  #4   Report Post  
Dan Krueger
 
Posts: n/a
Default

Mine isn't pictured - it has a blue-tinted bowl. They are still in
stores in that color so maybe it's pictured elsewhere on their site. It
works very well. You can drain the collected water into an empty can
but it also has barbs for a small diameter piece of tubing. I guess
that would work best in close quarters.

John H wrote:
On Mon, 16 May 2005 23:40:29 GMT, Dan Krueger
wrote:


Oil filters are made of paper. Maybe the filter your discussed with him
is different. In any case, the Racor filters are the way to go. They
have a clear bowl at the bottom that will allow you to drain any water


from the filter and extend its life. These are made for marine use and


won't remove any oil in the process since they are made for that. They
will also screw on to a conventional filter fitting. Just make sure you
have a little extra room underneath for the bowl and to access it for
drainage. I always wondered how people would know when the other
filters were full of water and needed changing.

More info...

http://www.parker.com/racor/spn_product.html

Dan


wrote:


Several years ago I bought an older boat with a 150 Yamaha, I found out
after several runs offshore that there was trash in the fuel tank because
the filter kept plugging up in choppy water. I told a friend that I was
going to get a bunch of larger universal fuel filters and just throw them
away until I get all the trash out of the fuel tank. The guy said not to use
paper filters because it filters the oil out of the gas. Is that true? Has
anyone else heard of that?
Thanks
Gary



Which of those do you use, Dan?

  #5   Report Post  
Dan Krueger
 
Posts: n/a
Default

I found it...

http://tinyurl.com/7slsk

Dan


John H wrote:

On Mon, 16 May 2005 23:40:29 GMT, Dan Krueger
wrote:


Oil filters are made of paper. Maybe the filter your discussed with him
is different. In any case, the Racor filters are the way to go. They
have a clear bowl at the bottom that will allow you to drain any water


from the filter and extend its life. These are made for marine use and


won't remove any oil in the process since they are made for that. They
will also screw on to a conventional filter fitting. Just make sure you
have a little extra room underneath for the bowl and to access it for
drainage. I always wondered how people would know when the other
filters were full of water and needed changing.

More info...

http://www.parker.com/racor/spn_product.html

Dan


wrote:


Several years ago I bought an older boat with a 150 Yamaha, I found out
after several runs offshore that there was trash in the fuel tank because
the filter kept plugging up in choppy water. I told a friend that I was
going to get a bunch of larger universal fuel filters and just throw them
away until I get all the trash out of the fuel tank. The guy said not to use
paper filters because it filters the oil out of the gas. Is that true? Has
anyone else heard of that?
Thanks
Gary



Which of those do you use, Dan?



  #6   Report Post  
John H
 
Posts: n/a
Default

On Wed, 18 May 2005 00:08:01 GMT, Dan Krueger
wrote:

I found it...

http://tinyurl.com/7slsk

Dan


John H wrote:

On Mon, 16 May 2005 23:40:29 GMT, Dan Krueger
wrote:


Oil filters are made of paper. Maybe the filter your discussed with him
is different. In any case, the Racor filters are the way to go. They
have a clear bowl at the bottom that will allow you to drain any water


from the filter and extend its life. These are made for marine use and


won't remove any oil in the process since they are made for that. They
will also screw on to a conventional filter fitting. Just make sure you
have a little extra room underneath for the bowl and to access it for
drainage. I always wondered how people would know when the other
filters were full of water and needed changing.

More info...

http://www.parker.com/racor/spn_product.html

Dan


wrote:


Several years ago I bought an older boat with a 150 Yamaha, I found out
after several runs offshore that there was trash in the fuel tank because
the filter kept plugging up in choppy water. I told a friend that I was
going to get a bunch of larger universal fuel filters and just throw them
away until I get all the trash out of the fuel tank. The guy said not to use
paper filters because it filters the oil out of the gas. Is that true? Has
anyone else heard of that?
Thanks
Gary



Which of those do you use, Dan?


Thanks Dan. I'm surprised that the see-thru isn't authorized for an inboard.
Hell, that's what I was looking for.
--
John H

"All decisions are the result of binary thinking."
  #7   Report Post  
Larry Kier
 
Posts: n/a
Default

Racor makes a model for inboard/stern drives. It has a metal bowl (you
can't see through it but it has the dtrain plug)

Larry

"John H" wrote in message
news
On Wed, 18 May 2005 00:08:01 GMT, Dan Krueger

wrote:

I found it...

http://tinyurl.com/7slsk

Dan


John H wrote:

On Mon, 16 May 2005 23:40:29 GMT, Dan Krueger

wrote:


Oil filters are made of paper. Maybe the filter your discussed with him
is different. In any case, the Racor filters are the way to go. They
have a clear bowl at the bottom that will allow you to drain any water


Thanks Dan. I'm surprised that the see-thru isn't authorized for an
inboard.
Hell, that's what I was looking for.
--
John H

"All decisions are the result of binary thinking."



  #8   Report Post  
Billgran
 
Posts: n/a
Default




Thanks Dan. I'm surprised that the see-thru isn't authorized for an
inboard.
Hell, that's what I was looking for.
--




Federal regulations state that all fuel system components withstand a 2 1/2
minute fire test, along with other specs, if used in a boat with an enclosed
gasoline engine. The plastic bowl filter would be illegal and very unsafe.
The approved Racor filter elements use the thicker steel shell and have the
letters UL after the part number. Don't skimp on safety. Please get familiar
with the laws and standard practices of fuel and electrical items in a boat,
not only to prevent explosions, but to possibly save the lives of yourself,
your loved ones, and innocent bystanders.

Bill Grannis
service manager


  #9   Report Post  
Netsock
 
Posts: n/a
Default


wrote in message
...
Several years ago I bought an older boat with a 150 Yamaha, I found out
after several runs offshore that there was trash in the fuel tank because
the filter kept plugging up in choppy water. I told a friend that I was
going to get a bunch of larger universal fuel filters and just throw them
away until I get all the trash out of the fuel tank. The guy said not to

use
paper filters because it filters the oil out of the gas. Is that true? Has
anyone else heard of that?
Thanks
Gary


Hogwash.

Even if it did trap oil first, it could only hold so much, and then it would
let the rest pass.

I've used paper filters since 1970, on many outboards...no problems.

--
-Netsock

"It's just about going fast...that's all..."
http://home.columbus.rr.com/ckg/


  #10   Report Post  
John H
 
Posts: n/a
Default

On Wed, 18 May 2005 10:59:38 GMT, "Billgran"
wrote:




Thanks Dan. I'm surprised that the see-thru isn't authorized for an
inboard.
Hell, that's what I was looking for.
--




Federal regulations state that all fuel system components withstand a 2 1/2
minute fire test, along with other specs, if used in a boat with an enclosed
gasoline engine. The plastic bowl filter would be illegal and very unsafe.
The approved Racor filter elements use the thicker steel shell and have the
letters UL after the part number. Don't skimp on safety. Please get familiar
with the laws and standard practices of fuel and electrical items in a boat,
not only to prevent explosions, but to possibly save the lives of yourself,
your loved ones, and innocent bystanders.

Bill Grannis
service manager

Thanks Bill. Once I saw that it wasn't approved for my inboard, I wasn't
planning to buy it. I didn't know about the 2 1/2 minute fire test either.
--
John H

"All decisions are the result of binary thinking."
Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is Off
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Fuel tank fitting question. Chris Mares General 5 February 6th 05 01:28 PM
Let there be heat! Gould 0738 General 4 November 29th 04 01:41 AM
Thunderbird Message Filter Upgraded Dr. Dr. Smithers General 11 November 17th 04 01:53 PM
Contents of vacuum bag Jon Smithe General 3 October 30th 04 04:50 PM
Fuel transfer/polishing pump Doug Dotson Cruising 408 February 2nd 04 11:58 PM


All times are GMT +1. The time now is 11:57 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 BoatBanter.com.
The comments are property of their posters.
 

About Us

"It's about Boats"

 

Copyright © 2017