Home |
Search |
Today's Posts |
|
#1
![]() |
|||
|
|||
![]()
Hi there,
My prop on my 70's era Merc Motor has about an inch missing off of one of the fins. Fortunately I do have the missing piece as it broke within reach. Can these props be fixed? Or are new ones the only option? Cheers |
#3
![]() |
|||
|
|||
![]()
Need a prop for a 1.5 cruse in carry got one?
Mike G wrote: In article , says... Hi there, My prop on my 70's era Merc Motor has about an inch missing off of one of the fins. Fortunately I do have the missing piece as it broke within reach. Can these props be fixed? Or are new ones the only option? Cheers It can most likely can be fixed However, if you had a spare prop you wouldn't be waiting on the repairs. Why not both, a new prop and get going right away then get the old one repaired and use it for a spare. -- Mike G. Heirloom Woods www.heirloom-woods.net |
#4
![]() |
|||
|
|||
![]()
Just go to ebay, many MANY props avail right now.
Not too expensive either, just watch the prices. |
#5
![]() |
|||
|
|||
![]()
Chris wrote:
Hi there, My prop on my 70's era Merc Motor has about an inch missing off of one of the fins. Fortunately I do have the missing piece as it broke within reach. Can these props be fixed? Or are new ones the only option? Cheers There are lots of shops that rebuilt props. Your local marina should be able to recomend someone local. Or just look in the phone book. Capt Jack R.. |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Changing Prop inwater. (lessons learned) | Cruising | |||
prop advise needed | General | |||
Prop | General | |||
Volvo 270 outdrive prop cone replacement? | General | |||
Removing lower unit from 40 hp Johnson outboard - Help? | General |