I am getting a 1980 sidewinder from my girls grandfather for free but it
needs lots of work just wondering what on average will it cost to rebuild a
260 hp 350 any ballpark ideas the moter runns well but it is a little tired
below is a link to see the pics thanks for the help fellas.....Bigpurple

http://www.bigpurple.tv/new_page_2.htm

"Inigo Montoya" wrote in message
...

"Inigo Montoya" wrote in message
...
Jasper can supply replacement for approx $2300-2500 w/exchange depending
on
model.


FYI,

Looks like a fun project. Sidewinder was quite popular in late '70's
early
80's in upper Midwest. Shallow V with pad bottom very similar to
Hydrostream and smaller Checkmates. Made a decent ski/lake racer. If I
remember correctly, a black one was used in one of the Roger Moore "James
Bond" movies (can't remember the name, but it was set in Louisiana
bayous).



The movie was "Live and Let Die", from 1973. This was the first Bond movie
to star Roger Moore in the role of James Bond. Generally regarded as one of
the worst of the entire series, although I liked it primarily for the
boating scenes. Glastron supplied all the boats to the film. The boat that
was used in the famous jump scene was a GT 150. In 1973, I would have given
my left nut to own a Glastron-Carlson CV-21.

Look similar, though............

"RG" wrote in message
news:rjATa.14696$Bp2.12883@fed1read07...

The movie was "Live and Let Die", from 1973. This was the first Bond
movie
to star Roger Moore in the role of James Bond. Generally regarded as one
of
the worst of the entire series, although I liked it primarily for the
boating scenes. Glastron supplied all the boats to the film. The boat
that
was used in the famous jump scene was a GT 150. In 1973, I would have
given
my left nut to own a Glastron-Carlson CV-21.

Pretty sure thompson made the sidewinder
"Mr.Nicegye" wrote in message
...
I am getting a 1980 sidewinder from my girls grandfather for free but it
needs lots of work just wondering what on average will it cost to rebuild
a
260 hp 350 any ballpark ideas the moter runns well but it is a little
tired
below is a link to see the pics thanks for the help fellas.....Bigpurple

http://www.bigpurple.tv/new_page_2.htm

"Calif Bill" wrote in message ...
"Michael Seeley" wrote in message
rthlink.net...
Pretty sure thompson made the sidewinder
"Mr.Nicegye" wrote in message
...
I am getting a 1980 sidewinder from my girls grandfather for free but it
needs lots of work just wondering what on average will it cost to
rebuild
a
260 hp 350 any ballpark ideas the moter runns well but it is a little
tired
below is a link to see the pics thanks for the help fellas.....Bigpurple

http://www.bigpurple.tv/new_page_2.htm



Doing the job yourself, should be $600-$1000. A tired engine, would need
new rings and bearings and a valve job. Maybe a valve or two.
bill



Yeah take it from this ****ing Butcher. He is Sanford And Sons finest
tech! $600.00 thats all you need to do the job right! That's it!
That mutha ****a done run good now Mr.White...............

"Calif Bill" wrote in message ...
"Michael Seeley" wrote in message
rthlink.net...
Pretty sure thompson made the sidewinder
"Mr.Nicegye" wrote in message
...
I am getting a 1980 sidewinder from my girls grandfather for free but it
needs lots of work just wondering what on average will it cost to
rebuild
a
260 hp 350 any ballpark ideas the moter runns well but it is a little
tired
below is a link to see the pics thanks for the help fellas.....Bigpurple

http://www.bigpurple.tv/new_page_2.htm



Doing the job yourself, should be $600-$1000. A tired engine, would need
new rings and bearings and a valve job. Maybe a valve or two.
bill



Yeah take it from this ****ing Butcher. He is Sanford And Sons finest
tech! $600.00 thats all you need to do the job right! That's it!
That mutha ****a done run good now Mr.White...............

"Calif Bill" wrote in message ...
"Michael Seeley" wrote in message
rthlink.net...
Pretty sure thompson made the sidewinder
"Mr.Nicegye" wrote in message
...
I am getting a 1980 sidewinder from my girls grandfather for free but it
needs lots of work just wondering what on average will it cost to
rebuild
a
260 hp 350 any ballpark ideas the moter runns well but it is a little
tired
below is a link to see the pics thanks for the help fellas.....Bigpurple

http://www.bigpurple.tv/new_page_2.htm



Doing the job yourself, should be $600-$1000. A tired engine, would need
new rings and bearings and a valve job. Maybe a valve or two.
bill



Yeah take it from this ****ing Butcher. He is Sanford And Sons finest
tech! $600.00 thats all you need to do the job right! That's it!
That mutha ****a done run good now Mr.White...............

"Captain Cum Tanker" wrote in message
om...
"Calif Bill" wrote in message
...
"Michael Seeley" wrote in message
rthlink.net...
Pretty sure thompson made the sidewinder
"Mr.Nicegye" wrote in message
...
I am getting a 1980 sidewinder from my girls grandfather for free
but it
needs lots of work just wondering what on average will it cost to
rebuild
a
260 hp 350 any ballpark ideas the moter runns well but it is a
little
tired
below is a link to see the pics thanks for the help
fellas.....Bigpurple

http://www.bigpurple.tv/new_page_2.htm



Doing the job yourself, should be $600-$1000. A tired engine, would
need
new rings and bearings and a valve job. Maybe a valve or two.
bill



Yeah take it from this ****ing Butcher. He is Sanford And Sons finest
tech! $600.00 thats all you need to do the job right! That's it!
That mutha ****a done run good now Mr.White...............

Well, maybe you pay more for parts. Is maybe because you are dumb as grass,
a little dumber than a chicken. Is this JimDummy again. Geeze, it's a
tired engine not a broken engine. 250 for valve job, 125 for gaskets and
rings and bearings are not going to set you back much more than 200. When
you can get a rebuilt longblock shipped to you for 1200-1500 and that
includes labor. Spend some money on getting an education! Captain, My ass!
Maybe of the SS Minnow.

"Calif Bill" wrote in message ...
"Captain Cum Tanker" wrote in message
om...
"Calif Bill" wrote in message
...
"Michael Seeley" wrote in message
rthlink.net...
Pretty sure thompson made the sidewinder
"Mr.Nicegye" wrote in message
...
I am getting a 1980 sidewinder from my girls grandfather for free
but it
needs lots of work just wondering what on average will it cost to
rebuild
a
260 hp 350 any ballpark ideas the moter runns well but it is a
little
tired
below is a link to see the pics thanks for the help
fellas.....Bigpurple

http://www.bigpurple.tv/new_page_2.htm



Doing the job yourself, should be $600-$1000. A tired engine, would
need
new rings and bearings and a valve job. Maybe a valve or two.
bill



Yeah take it from this ****ing Butcher. He is Sanford And Sons finest
tech! $600.00 thats all you need to do the job right! That's it!
That mutha ****a done run good now Mr.White...............

Well, maybe you pay more for parts. Is maybe because you are dumb as grass,
a little dumber than a chicken. Is this JimDummy again. Geeze, it's a
tired engine not a broken engine. 250 for valve job, 125 for gaskets and
rings and bearings are not going to set you back much more than 200. When
you can get a rebuilt longblock shipped to you for 1200-1500 and that
includes labor. Spend some money on getting an education! Captain, My ass!
Maybe of the SS Minnow.




Hey Fred Sanford, You get what you ****ing pay for jackass! I am sure
your machine work and valve jobs are done by the ghetto's finest but
that still wouldn't end up in my boat or car. Maybe be good enough
for your down sydrome ****ing mind. Your thinking is cheaper is
better......Guess what **** face that isn't the case. Your a real
highminded ****. Take your ****ing butcher rebuilds and shove them up
your ass you ****ing stinking black *******! The racing world has no
room for ****ing goofy ****ing *******s like you. Find another site
in here. Maybe you can start your own
Lowbudget.Ghetto.Engine.Rebuilds. I think that is more fitting your
your train of thought. As a great man in here once
said.............Fist yourself!!!

what a facinating discussion in a newsgroup about sailboat racing.

"Captain Cum Tanker" wrote in message
om...
"Calif Bill" wrote in message
...
"Captain Cum Tanker" wrote in message
om...
"Calif Bill" wrote in message
...
"Michael Seeley" wrote in message
rthlink.net...
Pretty sure thompson made the sidewinder
"Mr.Nicegye" wrote in message
...
I am getting a 1980 sidewinder from my girls grandfather for
free
but it
needs lots of work just wondering what on average will it cost
to
rebuild
a
260 hp 350 any ballpark ideas the moter runns well but it is a
little
tired
below is a link to see the pics thanks for the help
fellas.....Bigpurple

http://www.bigpurple.tv/new_page_2.htm



Doing the job yourself, should be $600-$1000. A tired engine, would
need
new rings and bearings and a valve job. Maybe a valve or two.
bill



Yeah take it from this ****ing Butcher. He is Sanford And Sons finest
tech! $600.00 thats all you need to do the job right! That's it!
That mutha ****a done run good now Mr.White...............

Well, maybe you pay more for parts. Is maybe because you are dumb as
grass,
a little dumber than a chicken. Is this JimDummy again. Geeze, it's a
tired engine not a broken engine. 250 for valve job, 125 for gaskets
and
rings and bearings are not going to set you back much more than 200.
When
you can get a rebuilt longblock shipped to you for 1200-1500 and that
includes labor. Spend some money on getting an education! Captain, My
ass!
Maybe of the SS Minnow.




Hey Fred Sanford, You get what you ****ing pay for jackass! I am sure
your machine work and valve jobs are done by the ghetto's finest but
that still wouldn't end up in my boat or car. Maybe be good enough
for your down sydrome ****ing mind. Your thinking is cheaper is
better......Guess what **** face that isn't the case. Your a real
highminded ****. Take your ****ing butcher rebuilds and shove them up
your ass you ****ing stinking black *******! The racing world has no
room for ****ing goofy ****ing *******s like you. Find another site
in here. Maybe you can start your own
Lowbudget.Ghetto.Engine.Rebuilds. I think that is more fitting your
your train of thought. As a great man in here once
said.............Fist yourself!!!