On Wed, 23 Feb 2005 21:14:04 GMT, "gunny" wrote:

Cooling problem even Merc techs can't answer.
Engine temp at 200-210 F, exh manifolds port, 140-160 F, Stbd over 200 F.
Unit has new intake water pump and engine circ pump. Standard sea-water cooling.
Manifolds boiled out with acid, rodded, flushed. Equal water flow thru both on water flow test.
Exh elbows new, new thermostat, sender and guage, new engine circ pump.
No broken hosesand It appears it is determined to defy all laws of thermodynamics.

Why didn't I just satisfy my fishing urges from the bank ?????????

Any suggestions, other than put to sea, set fire and call Coast Guard ??

gunny
Semper Fi !!



--------------= Posted using GrabIt =----------------
------= Binary Usenet downloading made easy =---------
-= Get GrabIt for free from http://www.shemes.com/ =-

Could you have a crack in the exhaust manifold (stbd) allowing water into the
cylinders? Any water in the oil? How old are the exhaust manifolds? One of mine
(stbd) plugged itself when seven seasons (about 450 hrs) old. Are you getting a
good flow from both exhaust outlets at the rear of the boat? My first warning,
which I didn't heed, was a *big* difference in the flow from the port and stbd
exhaust outlets.

John H

On the 'PocoLoco' out of Deale, MD,
on the beautiful Chesapeake Bay!

"Divide each difficulty into as many parts as is feasible and necessary to resolve it."
Rene Descartes