On Wed, 25 Feb 2015 20:45:20 -0500, Someone wrote:

Keyser Söze wrote:
On 2/23/15 11:08 AM, wrote:
On Mon, 23 Feb 2015 07:07:39 -0800 (PST), Tim
wrote:

Greg you're right but I'm thinking more of a dedicated pistol
instead of a cut down bullpup

This is just a way to sidestep the ATF short barrel rifle law. You
notice they call those stumpy stocks a "brace" too. Some of these
things accept AR style accessories so you could put a telescoping M4
shoulder stock on most of them but you are then making a "hold your
nose legal" gun illegal.
I think they make these things, just because they can and I am not
really sure what they are good for.


One of the guys I occasionally see out in Virginia has one of those AR
type pistols. I shot a few rounds out of it once. I agree...I have no
idea what they are good for, aside from bragging rights.

You live for bragging rights. It's been displayed here ad nauseam.

He'll be showing us pictures of 'his' soon enough.
--

Guns don't cause problems. The behavior
of certain gun owners causes problems.

On 2/26/15 7:07 AM, John H. wrote:
On Wed, 25 Feb 2015 20:43:21 -0500, Someone wrote:

Tim wrote:
On Sunday, February 22, 2015 at 7:48:27 PM UTC-8, wrote:
On Sun, 22 Feb 2015 22:22:17 -0500, Wayne.B
wrote:

On Sun, 22 Feb 2015 21:21:54 -0500, wrote:

On Sun, 22 Feb 2015 20:21:00 -0500, John H.
wrote:

3 Ways to Stop the .223/5.56 (M855) Ammunition Ban

http://blog.cheaperthandirt.com/3-wa...pthe223m855ban
They make is sound like most rifle bullets will not go through both
sides of the level III-A vest..
You really need a ballistic plate to stop a rifle and even then, not
all rifles.
===

Are there any handguns set up for the .223/5.56 (M855) round?

Several but this may be ugly enough to attract their attention
http://www.impactguns.com/kel-tec-pl...832000375.aspx
Only other one I can think of is a single shot Thompson Contender

http://media.liveauctiongroup.net/i/...CC887D551CAEF0
I have this one with the rail on top...

http://www.swissarms.ch/en/SG_553_P.html

I especially like that it's qualified in all combat zones! Hell, you can take that
puppy to northern Canada and do some serious goose shooting.

Perhaps you could cut down one of your many Mosin Nagents into a useful
pistol length and use it to hunt squirrels and chipmunks for your lovely
wife to skin and cook with taters, carrots, and onions as you travel
state to state towing your RV.

Or you could buy one of these, ready made for the task, and a lot easier
for someone like you to shoot:

http://www.ruger.com/products/22Charger/models.html



--
Proud to be a Liberal.

On 2/26/15 7:08 AM, John H. wrote:
On Wed, 25 Feb 2015 20:45:20 -0500, Someone wrote:

Keyser Söze wrote:
On 2/23/15 11:08 AM, wrote:
On Mon, 23 Feb 2015 07:07:39 -0800 (PST), Tim
wrote:

Greg you're right but I'm thinking more of a dedicated pistol
instead of a cut down bullpup

This is just a way to sidestep the ATF short barrel rifle law. You
notice they call those stumpy stocks a "brace" too. Some of these
things accept AR style accessories so you could put a telescoping M4
shoulder stock on most of them but you are then making a "hold your
nose legal" gun illegal.
I think they make these things, just because they can and I am not
really sure what they are good for.


One of the guys I occasionally see out in Virginia has one of those AR
type pistols. I shot a few rounds out of it once. I agree...I have no
idea what they are good for, aside from bragging rights.

You live for bragging rights. It's been displayed here ad nauseam.

He'll be showing us pictures of 'his' soon enough.


Mine still works, John.


--
Proud to be a Liberal.

John H. wrote:
On Wed, 25 Feb 2015 20:43:21 -0500, Someone wrote:

Tim wrote:
On Sunday, February 22, 2015 at 7:48:27 PM UTC-8, wrote:
On Sun, 22 Feb 2015 22:22:17 -0500, Wayne.B
wrote:

On Sun, 22 Feb 2015 21:21:54 -0500, wrote:

On Sun, 22 Feb 2015 20:21:00 -0500, John H.
wrote:

3 Ways to Stop the .223/5.56 (M855) Ammunition Ban

http://blog.cheaperthandirt.com/3-wa...pthe223m855ban
They make is sound like most rifle bullets will not go through both
sides of the level III-A vest..
You really need a ballistic plate to stop a rifle and even then, not
all rifles.
===

Are there any handguns set up for the .223/5.56 (M855) round?

Several but this may be ugly enough to attract their attention
http://www.impactguns.com/kel-tec-pl...832000375.aspx
Only other one I can think of is a single shot Thompson Contender

http://media.liveauctiongroup.net/i/...CC887D551CAEF0
I have this one with the rail on top...

http://www.swissarms.ch/en/SG_553_P.html
I especially like that it's qualified in all combat zones! Hell, you can take that
puppy to northern Canada and do some serious goose shooting.


It's value has increased by $1000 since I bought it so I haven't fired
it. If the price keeps going up I might sell it. It the price levels
off it's going to the range!

John H. wrote:
On Wed, 25 Feb 2015 20:43:21 -0500, Someone wrote:

Tim wrote:
On Sunday, February 22, 2015 at 7:48:27 PM UTC-8, wrote:
On Sun, 22 Feb 2015 22:22:17 -0500, Wayne.B
wrote:

On Sun, 22 Feb 2015 21:21:54 -0500, wrote:

On Sun, 22 Feb 2015 20:21:00 -0500, John H.
wrote:

3 Ways to Stop the .223/5.56 (M855) Ammunition Ban

http://blog.cheaperthandirt.com/3-wa...pthe223m855ban
They make is sound like most rifle bullets will not go through both
sides of the level III-A vest..
You really need a ballistic plate to stop a rifle and even then, not
all rifles.
===

Are there any handguns set up for the .223/5.56 (M855) round?

Several but this may be ugly enough to attract their attention
http://www.impactguns.com/kel-tec-pl...832000375.aspx
Only other one I can think of is a single shot Thompson Contender

http://media.liveauctiongroup.net/i/...CC887D551CAEF0
I have this one with the rail on top...

http://www.swissarms.ch/en/SG_553_P.html
I especially like that it's qualified in all combat zones! Hell, you can take that
puppy to northern Canada and do some serious goose shooting.


Here's the same model. I'm glad I bought it when I did!

http://www.gunbroker.com/Auction/Vie...=470455632#PIC

John H. wrote:
On Wed, 25 Feb 2015 20:45:20 -0500, Someone wrote:

Keyser Söze wrote:
On 2/23/15 11:08 AM, wrote:
On Mon, 23 Feb 2015 07:07:39 -0800 (PST), Tim
wrote:

Greg you're right but I'm thinking more of a dedicated pistol
instead of a cut down bullpup
This is just a way to sidestep the ATF short barrel rifle law. You
notice they call those stumpy stocks a "brace" too. Some of these
things accept AR style accessories so you could put a telescoping M4
shoulder stock on most of them but you are then making a "hold your
nose legal" gun illegal.
I think they make these things, just because they can and I am not
really sure what they are good for.

One of the guys I occasionally see out in Virginia has one of those AR
type pistols. I shot a few rounds out of it once. I agree...I have no
idea what they are good for, aside from bragging rights.

You live for bragging rights. It's been displayed here ad nauseam.
He'll be showing us pictures of 'his' soon enough.
Not now that you predicted it!

On Thu, 26 Feb 2015 19:44:07 -0500, Someone wrote:

John H. wrote:
On Wed, 25 Feb 2015 20:43:21 -0500, Someone wrote:

Tim wrote:
On Sunday, February 22, 2015 at 7:48:27 PM UTC-8, wrote:
On Sun, 22 Feb 2015 22:22:17 -0500, Wayne.B
wrote:

On Sun, 22 Feb 2015 21:21:54 -0500, wrote:

On Sun, 22 Feb 2015 20:21:00 -0500, John H.
wrote:

3 Ways to Stop the .223/5.56 (M855) Ammunition Ban

http://blog.cheaperthandirt.com/3-wa...pthe223m855ban
They make is sound like most rifle bullets will not go through both
sides of the level III-A vest..
You really need a ballistic plate to stop a rifle and even then, not
all rifles.
===

Are there any handguns set up for the .223/5.56 (M855) round?

Several but this may be ugly enough to attract their attention
http://www.impactguns.com/kel-tec-pl...832000375.aspx
Only other one I can think of is a single shot Thompson Contender

http://media.liveauctiongroup.net/i/...CC887D551CAEF0
I have this one with the rail on top...

http://www.swissarms.ch/en/SG_553_P.html
I especially like that it's qualified in all combat zones! Hell, you can take that
puppy to northern Canada and do some serious goose shooting.


Here's the same model. I'm glad I bought it when I did!

http://www.gunbroker.com/Auction/Vie...=470455632#PIC

Good for you!

Have you decided on that other matter we discussed yet?
--

Guns don't cause problems. The behavior
of certain gun owners causes problems.

On Thu, 26 Feb 2015 19:45:18 -0500, Someone wrote:

John H. wrote:
On Wed, 25 Feb 2015 20:45:20 -0500, Someone wrote:

Keyser Söze wrote:
On 2/23/15 11:08 AM, wrote:
On Mon, 23 Feb 2015 07:07:39 -0800 (PST), Tim
wrote:

Greg you're right but I'm thinking more of a dedicated pistol
instead of a cut down bullpup
This is just a way to sidestep the ATF short barrel rifle law. You
notice they call those stumpy stocks a "brace" too. Some of these
things accept AR style accessories so you could put a telescoping M4
shoulder stock on most of them but you are then making a "hold your
nose legal" gun illegal.
I think they make these things, just because they can and I am not
really sure what they are good for.

One of the guys I occasionally see out in Virginia has one of those AR
type pistols. I shot a few rounds out of it once. I agree...I have no
idea what they are good for, aside from bragging rights.

You live for bragging rights. It's been displayed here ad nauseam.
He'll be showing us pictures of 'his' soon enough.
Not now that you predicted it!

His will be much better than a Sig Sauer.
--

Guns don't cause problems. The behavior
of certain gun owners causes problems.

On 2/27/15 8:11 AM, John H. wrote:
On Thu, 26 Feb 2015 19:45:18 -0500, Someone wrote:

John H. wrote:
On Wed, 25 Feb 2015 20:45:20 -0500, Someone wrote:

Keyser Söze wrote:
On 2/23/15 11:08 AM, wrote:
On Mon, 23 Feb 2015 07:07:39 -0800 (PST), Tim
wrote:

Greg you're right but I'm thinking more of a dedicated pistol
instead of a cut down bullpup
This is just a way to sidestep the ATF short barrel rifle law. You
notice they call those stumpy stocks a "brace" too. Some of these
things accept AR style accessories so you could put a telescoping M4
shoulder stock on most of them but you are then making a "hold your
nose legal" gun illegal.
I think they make these things, just because they can and I am not
really sure what they are good for.

One of the guys I occasionally see out in Virginia has one of those AR
type pistols. I shot a few rounds out of it once. I agree...I have no
idea what they are good for, aside from bragging rights.

You live for bragging rights. It's been displayed here ad nauseam.
He'll be showing us pictures of 'his' soon enough.
Not now that you predicted it!

His will be much better than a Sig Sauer.


SIG makes some fine firearms, but I found another brand more accurate in
9 mm.

--
Proud to be a Liberal.

On 2/27/2015 9:43 AM, Keyser Söze wrote:
On 2/27/15 8:11 AM, John H. wrote:
On Thu, 26 Feb 2015 19:45:18 -0500, Someone
wrote:

John H. wrote:
On Wed, 25 Feb 2015 20:45:20 -0500, Someone
wrote:

Keyser Söze wrote:
On 2/23/15 11:08 AM, wrote:
On Mon, 23 Feb 2015 07:07:39 -0800 (PST), Tim
wrote:

Greg you're right but I'm thinking more of a dedicated pistol
instead of a cut down bullpup
This is just a way to sidestep the ATF short barrel rifle law. You
notice they call those stumpy stocks a "brace" too. Some of these
things accept AR style accessories so you could put a telescoping M4
shoulder stock on most of them but you are then making a "hold your
nose legal" gun illegal.
I think they make these things, just because they can and I am not
really sure what they are good for.

One of the guys I occasionally see out in Virginia has one of
those AR
type pistols. I shot a few rounds out of it once. I agree...I have no
idea what they are good for, aside from bragging rights.

You live for bragging rights. It's been displayed here ad nauseam.
He'll be showing us pictures of 'his' soon enough.
Not now that you predicted it!

His will be much better than a Sig Sauer.


SIG makes some fine firearms, but I found another brand more accurate in
9 mm.

Did you really? That's a pretty broad stroke you brush. It's really too
dumb a statement to call it an outright lie.

--

Respectfully submitted by Justan

Laugh of the day from Krause

"I'm not to blame anymore for the atmosphere in here.
I've been "born again" as a nice guy."