![]() |
A real dirt bike...
On 2/12/2014 12:03 PM, KC wrote:
On 2/12/2014 11:40 AM, Poco Loco wrote: On Wed, 12 Feb 2014 11:38:48 -0500, KC wrote: On 2/12/2014 11:20 AM, Poco Loco wrote: On Wed, 12 Feb 2014 10:33:01 -0500, KC wrote: On 2/12/2014 10:06 AM, Mr. Luddite wrote: On 2/12/2014 9:42 AM, Poco Loco wrote: On Wed, 12 Feb 2014 09:06:41 -0500, BAR wrote: In article , __ says... Mr. Luddite wrote: On 2/9/2014 6:25 PM, Poco Loco wrote: On Sun, 9 Feb 2014 15:03:40 -0800 (PST), Tim wrote: On Sunday, February 9, 2014 4:30:04 PM UTC-6, John H. wrote: On Sun, 9 Feb 2014 13:31:40 -0800 (PST), Tim wrote: On Sunday, February 9, 2014 7:31:31 AM UTC-6, F.O.A.D. wrote: I'd love to have one of these... http://www.youtube.com/watch?v=U7mTwM7afQA how about something like this? http://thekneeslider.com/1937-front-...cle-prototype/ Looks like something Moto Guzzi made during the war. "Goose" probably tries something like that too, but this is French, and the French at that time were known to be great tinkerers, with results to match. Yeah, I should have said it looks like something Guzzi *could* have made during the war. Something like this: http://www.youtube.com/watch?v=4cOlS_ShXf4 Here's an idea for Scott: (warning - contains boating content) http://www.elrellano.com/videos_online/8146/barca-a-motor.html No steering unless that rowboat has a bow thruster. Just like a motor cycle, you just lean into the turn to make it go that way. No, leaning doesn't make it turn. Leaning enables the motorcycle to be kept more vertical when turning. Pushing on the handlebar makes you turn. Push left, go left. Push right, go right. Countersteering. Heh. I just mentioned to Scott about that. Those who don't ride will think it's weird. They think it should turn like a car. Yes, counter steering but again, it's not the fastest way around the corner:) It's the only way around the corner, at speed, on a motorcycle. No it's not.... if you are countersteering, your drive wheel is way outside the most efficient line and needs to come back before you can get traction and get out of the corner... You countersteer to get the bike to lean, once leaned you can skid on around. But, you first have to get the turn started. Trust me, .01 seconds coming in and going out...Way too much sideways, not enough forward.... Look, I put the stopwatch to this **** every day, I trained my daughter to corner "as good as any body in the division"... But I am not gonna' argue any more with it. Let me take it one step further... I get what you are saying Dick but that's old school... we now "get the turn started" by drawing slightly on the front brake and using throttle (not brakes) to break away the back end. Now I can "get into the corner" without spending all that time (.003 seconds??) wobbling back and fourth instead of going forward... I know it seems like a tiny thing, but again, the secret I just told you is "very new school" and Jess was one of the first to embrace it three years ago..... It works, period. I saw her corner circles around a WMA pro a few weeks back... Jaws dropped for sure... |
A real dirt bike...
On 2/12/2014 12:12 PM, KC wrote:
On 2/12/2014 12:03 PM, KC wrote: On 2/12/2014 11:40 AM, Poco Loco wrote: On Wed, 12 Feb 2014 11:38:48 -0500, KC wrote: On 2/12/2014 11:20 AM, Poco Loco wrote: On Wed, 12 Feb 2014 10:33:01 -0500, KC wrote: On 2/12/2014 10:06 AM, Mr. Luddite wrote: On 2/12/2014 9:42 AM, Poco Loco wrote: On Wed, 12 Feb 2014 09:06:41 -0500, BAR wrote: In article , __ says... Mr. Luddite wrote: On 2/9/2014 6:25 PM, Poco Loco wrote: On Sun, 9 Feb 2014 15:03:40 -0800 (PST), Tim wrote: On Sunday, February 9, 2014 4:30:04 PM UTC-6, John H. wrote: On Sun, 9 Feb 2014 13:31:40 -0800 (PST), Tim wrote: On Sunday, February 9, 2014 7:31:31 AM UTC-6, F.O.A.D. wrote: I'd love to have one of these... http://www.youtube.com/watch?v=U7mTwM7afQA how about something like this? http://thekneeslider.com/1937-front-...cle-prototype/ Looks like something Moto Guzzi made during the war. "Goose" probably tries something like that too, but this is French, and the French at that time were known to be great tinkerers, with results to match. Yeah, I should have said it looks like something Guzzi *could* have made during the war. Something like this: http://www.youtube.com/watch?v=4cOlS_ShXf4 Here's an idea for Scott: (warning - contains boating content) http://www.elrellano.com/videos_online/8146/barca-a-motor.html No steering unless that rowboat has a bow thruster. Just like a motor cycle, you just lean into the turn to make it go that way. No, leaning doesn't make it turn. Leaning enables the motorcycle to be kept more vertical when turning. Pushing on the handlebar makes you turn. Push left, go left. Push right, go right. Countersteering. Heh. I just mentioned to Scott about that. Those who don't ride will think it's weird. They think it should turn like a car. Yes, counter steering but again, it's not the fastest way around the corner:) It's the only way around the corner, at speed, on a motorcycle. No it's not.... if you are countersteering, your drive wheel is way outside the most efficient line and needs to come back before you can get traction and get out of the corner... You countersteer to get the bike to lean, once leaned you can skid on around. But, you first have to get the turn started. Trust me, .01 seconds coming in and going out...Way too much sideways, not enough forward.... Look, I put the stopwatch to this **** every day, I trained my daughter to corner "as good as any body in the division"... But I am not gonna' argue any more with it. Let me take it one step further... I get what you are saying Dick but that's old school... we now "get the turn started" by drawing slightly on the front brake and using throttle (not brakes) to break away the back end. Now I can "get into the corner" without spending all that time (.003 seconds??) wobbling back and fourth instead of going forward... I know it seems like a tiny thing, but again, the secret I just told you is "very new school" and Jess was one of the first to embrace it three years ago..... It works, period. I saw her corner circles around a WMA pro a few weeks back... Jaws dropped for sure... I am not arguing with you. I don't ride dirt bikes around racetracks so losing .01 seconds on a country road turn on a Harley doesn't mean anything to me. :-) |
A real dirt bike...
On Wed, 12 Feb 2014 12:01:35 -0500, KC wrote:
On 2/12/2014 11:42 AM, Poco Loco wrote: On Wed, 12 Feb 2014 11:37:38 -0500, KC wrote: On 2/12/2014 11:23 AM, HanK wrote: On 2/12/2014 10:40 AM, KC wrote: On 2/12/2014 10:31 AM, KC wrote: On 2/12/2014 10:04 AM, Mr. Luddite wrote: On 2/12/2014 9:36 AM, KC wrote: On 2/12/2014 9:17 AM, Mr. Luddite wrote: On 2/12/2014 8:09 AM, Poco Loco wrote: On Tue, 11 Feb 2014 20:27:03 -0500, Earl__ wrote: Mr. Luddite wrote: On 2/9/2014 6:25 PM, Poco Loco wrote: On Sun, 9 Feb 2014 15:03:40 -0800 (PST), Tim wrote: On Sunday, February 9, 2014 4:30:04 PM UTC-6, John H. wrote: On Sun, 9 Feb 2014 13:31:40 -0800 (PST), Tim wrote: On Sunday, February 9, 2014 7:31:31 AM UTC-6, F.O.A.D. wrote: I'd love to have one of these... http://www.youtube.com/watch?v=U7mTwM7afQA how about something like this? http://thekneeslider.com/1937-front-...cle-prototype/ Looks like something Moto Guzzi made during the war. "Goose" probably tries something like that too, but this is French, and the French at that time were known to be great tinkerers, with results to match. Yeah, I should have said it looks like something Guzzi *could* have made during the war. Something like this: http://www.youtube.com/watch?v=4cOlS_ShXf4 Here's an idea for Scott: (warning - contains boating content) http://www.elrellano.com/videos_online/8146/barca-a-motor.html No steering unless that rowboat has a bow thruster. That boat is a high technology marvel incorporating 'eyeball sensormatic rotational assist'. Where you look is where you go. A sign on the bow says, "Don't look at women when operating this vessel." Sometimes the sign gets torn away. When I was a kid I had a 12' aluminum boat with a little 3hp outboard. I'd tighten the tension on the steering so the motor wouldn't move, sit in the middle seat and steer just by leaning towards one side or the other. Worked fine in large ponds. Somebody said "like a motorcycle"... But if you simply lean a motorcycle and don't turn the wheel, it will still go straight... Just sayin'. No, you have to tip the boat. Speaking of motorcycles, ever try this? Ride going straight ahead and push your *left* handlebar forward gently and see which way you turn. Then try with the *right* handlebar. Yeah, that's how she takes every turn... Reverse steer. Add in breaking loose the rear tire and you are starting to have some fun however, if you do though, you are losing time going sideways instead of forward:) Just reread that... I should say she counter steers when the suspension or body position is off... But it's not the fastest way around the track... What is the fastest way around the track? Ok, the fastest way involves being efficient in the corners. If you are countersteering n a corner, you are standing the bike too high, and the drive wheel is not taking the shortest distance around the corner. In racing terms, you blew out the birm.. It's not efficient to have that back tire way out there cause then it takes time to bring it back... Countersteering has nothing to do with how high the bike stands. Watch motorcycle road racing. Those folks are scraping their knee pads, and the bike is damn near scraping the handlebars. Yes, and if you watch closely, the front tire is turned in the direction of the turn, even ever so slightly.... The fast guys are not "counter steering" even if the tires are sliding. Not gonna' argue, it's what I do. My daughter is known as one of the best in the NE in corners. AJ Catanzaro, her mentor, trainer, and top 20 AMA pro said, "there is nothing I can do to make you faster in the corners, you look just like me". Many Pro WMA women admit, Jess corners better than most... No it's not. The pressure on the lower handlebar (left if turning left) is maintained throughout the turn. When the pressure on the lower handlebar is released, the bike goes upright and straightens out. If the pressure is increased, the bike leans more and the turn radius decreases. This continues until the traction is lost or something hits the ground. Not gonna argue, it's what I taught as an MSF instructor, and what I do. |
A real dirt bike...
On Wed, 12 Feb 2014 11:44:07 -0500, KC wrote:
On 2/12/2014 11:20 AM, Poco Loco wrote: On Wed, 12 Feb 2014 10:33:01 -0500, KC wrote: On 2/12/2014 10:06 AM, Mr. Luddite wrote: On 2/12/2014 9:42 AM, Poco Loco wrote: On Wed, 12 Feb 2014 09:06:41 -0500, BAR wrote: In article , __ says... Mr. Luddite wrote: On 2/9/2014 6:25 PM, Poco Loco wrote: On Sun, 9 Feb 2014 15:03:40 -0800 (PST), Tim wrote: On Sunday, February 9, 2014 4:30:04 PM UTC-6, John H. wrote: On Sun, 9 Feb 2014 13:31:40 -0800 (PST), Tim wrote: On Sunday, February 9, 2014 7:31:31 AM UTC-6, F.O.A.D. wrote: I'd love to have one of these... http://www.youtube.com/watch?v=U7mTwM7afQA how about something like this? http://thekneeslider.com/1937-front-...cle-prototype/ Looks like something Moto Guzzi made during the war. "Goose" probably tries something like that too, but this is French, and the French at that time were known to be great tinkerers, with results to match. Yeah, I should have said it looks like something Guzzi *could* have made during the war. Something like this: http://www.youtube.com/watch?v=4cOlS_ShXf4 Here's an idea for Scott: (warning - contains boating content) http://www.elrellano.com/videos_online/8146/barca-a-motor.html No steering unless that rowboat has a bow thruster. Just like a motor cycle, you just lean into the turn to make it go that way. No, leaning doesn't make it turn. Leaning enables the motorcycle to be kept more vertical when turning. Pushing on the handlebar makes you turn. Push left, go left. Push right, go right. Countersteering. Heh. I just mentioned to Scott about that. Those who don't ride will think it's weird. They think it should turn like a car. Yes, counter steering but again, it's not the fastest way around the corner:) It's the only way around the corner, at speed, on a motorcycle. I am beating myself up and I can't think of any place on the track where counter steering is faster... https://www.facebook.com/photo.php?fbid=10202016412913497&set=a.10202016402 113227.1073741828.1281248494&type=3&theater Here is Jess setting up for a corner... notice she is turning left, and her bars are slightly left.. If she let her back tire slide out more (blowing the corner) the bike would have to stand back up and the back tire come back in line to get out of the corner... don't know if that makes any sense. I have a video I could find later of two riders me and Jess study. One came though the corner right (her mentor) and the guy behind counter steered through and lost two seconds in the corner... Letting the back tire 'slide out more' is not a method of riding for anyone but dirt bikers. When she initiated the turn to the left, she did it by pushing on the left bar or pulling on the right bar. Once the bike started leaning (and turning) she can slide all she wants. I think what she is doing in the picture is coming out of a turn. So she's pushing on the right bar to straighten the bike up (or pulling on the left bar). Looking at the tracks in the dirt also shows that she's through the turn. |
A real dirt bike...
On Wed, 12 Feb 2014 12:12:22 -0500, KC wrote:
On 2/12/2014 12:03 PM, KC wrote: On 2/12/2014 11:40 AM, Poco Loco wrote: On Wed, 12 Feb 2014 11:38:48 -0500, KC wrote: On 2/12/2014 11:20 AM, Poco Loco wrote: On Wed, 12 Feb 2014 10:33:01 -0500, KC wrote: On 2/12/2014 10:06 AM, Mr. Luddite wrote: On 2/12/2014 9:42 AM, Poco Loco wrote: On Wed, 12 Feb 2014 09:06:41 -0500, BAR wrote: In article , __ says... Mr. Luddite wrote: On 2/9/2014 6:25 PM, Poco Loco wrote: On Sun, 9 Feb 2014 15:03:40 -0800 (PST), Tim wrote: On Sunday, February 9, 2014 4:30:04 PM UTC-6, John H. wrote: On Sun, 9 Feb 2014 13:31:40 -0800 (PST), Tim wrote: On Sunday, February 9, 2014 7:31:31 AM UTC-6, F.O.A.D. wrote: I'd love to have one of these... http://www.youtube.com/watch?v=U7mTwM7afQA how about something like this? http://thekneeslider.com/1937-front-...cle-prototype/ Looks like something Moto Guzzi made during the war. "Goose" probably tries something like that too, but this is French, and the French at that time were known to be great tinkerers, with results to match. Yeah, I should have said it looks like something Guzzi *could* have made during the war. Something like this: http://www.youtube.com/watch?v=4cOlS_ShXf4 Here's an idea for Scott: (warning - contains boating content) http://www.elrellano.com/videos_online/8146/barca-a-motor.html No steering unless that rowboat has a bow thruster. Just like a motor cycle, you just lean into the turn to make it go that way. No, leaning doesn't make it turn. Leaning enables the motorcycle to be kept more vertical when turning. Pushing on the handlebar makes you turn. Push left, go left. Push right, go right. Countersteering. Heh. I just mentioned to Scott about that. Those who don't ride will think it's weird. They think it should turn like a car. Yes, counter steering but again, it's not the fastest way around the corner:) It's the only way around the corner, at speed, on a motorcycle. No it's not.... if you are countersteering, your drive wheel is way outside the most efficient line and needs to come back before you can get traction and get out of the corner... You countersteer to get the bike to lean, once leaned you can skid on around. But, you first have to get the turn started. Trust me, .01 seconds coming in and going out...Way too much sideways, not enough forward.... Look, I put the stopwatch to this **** every day, I trained my daughter to corner "as good as any body in the division"... But I am not gonna' argue any more with it. Let me take it one step further... I get what you are saying Dick but that's old school... we now "get the turn started" by drawing slightly on the front brake and using throttle (not brakes) to break away the back end. Now I can "get into the corner" without spending all that time (.003 seconds??) wobbling back and fourth instead of going forward... I know it seems like a tiny thing, but again, the secret I just told you is "very new school" and Jess was one of the first to embrace it three years ago..... It works, period. I saw her corner circles around a WMA pro a few weeks back... Jaws dropped for sure... Fine. You're dirt riding and sliding, without leaning for the turn. You're not really 'steering' through the turn but sliding through the turn. However, if she's turning left and she leans the bike to the left, she did it by countersteering. |
A real dirt bike...
On 2/12/2014 12:38 PM, Poco Loco wrote:
On Wed, 12 Feb 2014 12:12:22 -0500, KC wrote: On 2/12/2014 12:03 PM, KC wrote: On 2/12/2014 11:40 AM, Poco Loco wrote: On Wed, 12 Feb 2014 11:38:48 -0500, KC wrote: On 2/12/2014 11:20 AM, Poco Loco wrote: On Wed, 12 Feb 2014 10:33:01 -0500, KC wrote: On 2/12/2014 10:06 AM, Mr. Luddite wrote: On 2/12/2014 9:42 AM, Poco Loco wrote: On Wed, 12 Feb 2014 09:06:41 -0500, BAR wrote: In article , __ says... Mr. Luddite wrote: On 2/9/2014 6:25 PM, Poco Loco wrote: On Sun, 9 Feb 2014 15:03:40 -0800 (PST), Tim wrote: On Sunday, February 9, 2014 4:30:04 PM UTC-6, John H. wrote: On Sun, 9 Feb 2014 13:31:40 -0800 (PST), Tim wrote: On Sunday, February 9, 2014 7:31:31 AM UTC-6, F.O.A.D. wrote: I'd love to have one of these... http://www.youtube.com/watch?v=U7mTwM7afQA how about something like this? http://thekneeslider.com/1937-front-...cle-prototype/ Looks like something Moto Guzzi made during the war. "Goose" probably tries something like that too, but this is French, and the French at that time were known to be great tinkerers, with results to match. Yeah, I should have said it looks like something Guzzi *could* have made during the war. Something like this: http://www.youtube.com/watch?v=4cOlS_ShXf4 Here's an idea for Scott: (warning - contains boating content) http://www.elrellano.com/videos_online/8146/barca-a-motor.html No steering unless that rowboat has a bow thruster. Just like a motor cycle, you just lean into the turn to make it go that way. No, leaning doesn't make it turn. Leaning enables the motorcycle to be kept more vertical when turning. Pushing on the handlebar makes you turn. Push left, go left. Push right, go right. Countersteering. Heh. I just mentioned to Scott about that. Those who don't ride will think it's weird. They think it should turn like a car. Yes, counter steering but again, it's not the fastest way around the corner:) It's the only way around the corner, at speed, on a motorcycle. No it's not.... if you are countersteering, your drive wheel is way outside the most efficient line and needs to come back before you can get traction and get out of the corner... You countersteer to get the bike to lean, once leaned you can skid on around. But, you first have to get the turn started. Trust me, .01 seconds coming in and going out...Way too much sideways, not enough forward.... Look, I put the stopwatch to this **** every day, I trained my daughter to corner "as good as any body in the division"... But I am not gonna' argue any more with it. Let me take it one step further... I get what you are saying Dick but that's old school... we now "get the turn started" by drawing slightly on the front brake and using throttle (not brakes) to break away the back end. Now I can "get into the corner" without spending all that time (.003 seconds??) wobbling back and fourth instead of going forward... I know it seems like a tiny thing, but again, the secret I just told you is "very new school" and Jess was one of the first to embrace it three years ago..... It works, period. I saw her corner circles around a WMA pro a few weeks back... Jaws dropped for sure... Fine. You're dirt riding and sliding, without leaning for the turn. You're not really 'steering' through the turn but sliding through the turn. However, if she's turning left and she leans the bike to the left, she did it by countersteering. Ok, guess we won't see eye to eye. I think of counter steering as turning left, with the bars slightly right.... Either way, here's another thing to take into consideration... "New School" is to steer with the back end, not the front end anyway:) |
A real dirt bike...
On 2/12/14, 10:02 AM, KC wrote:
On 2/12/2014 12:38 PM, Poco Loco wrote: On Wed, 12 Feb 2014 12:12:22 -0500, KC wrote: On 2/12/2014 12:03 PM, KC wrote: On 2/12/2014 11:40 AM, Poco Loco wrote: On Wed, 12 Feb 2014 11:38:48 -0500, KC wrote: On 2/12/2014 11:20 AM, Poco Loco wrote: On Wed, 12 Feb 2014 10:33:01 -0500, KC wrote: On 2/12/2014 10:06 AM, Mr. Luddite wrote: On 2/12/2014 9:42 AM, Poco Loco wrote: On Wed, 12 Feb 2014 09:06:41 -0500, BAR wrote: In article , __ says... Mr. Luddite wrote: On 2/9/2014 6:25 PM, Poco Loco wrote: On Sun, 9 Feb 2014 15:03:40 -0800 (PST), Tim wrote: On Sunday, February 9, 2014 4:30:04 PM UTC-6, John H. wrote: On Sun, 9 Feb 2014 13:31:40 -0800 (PST), Tim wrote: On Sunday, February 9, 2014 7:31:31 AM UTC-6, F.O.A.D. wrote: I'd love to have one of these... http://www.youtube.com/watch?v=U7mTwM7afQA how about something like this? http://thekneeslider.com/1937-front-...cle-prototype/ Looks like something Moto Guzzi made during the war. "Goose" probably tries something like that too, but this is French, and the French at that time were known to be great tinkerers, with results to match. Yeah, I should have said it looks like something Guzzi *could* have made during the war. Something like this: http://www.youtube.com/watch?v=4cOlS_ShXf4 Here's an idea for Scott: (warning - contains boating content) http://www.elrellano.com/videos_online/8146/barca-a-motor.html No steering unless that rowboat has a bow thruster. Just like a motor cycle, you just lean into the turn to make it go that way. No, leaning doesn't make it turn. Leaning enables the motorcycle to be kept more vertical when turning. Pushing on the handlebar makes you turn. Push left, go left. Push right, go right. Countersteering. Heh. I just mentioned to Scott about that. Those who don't ride will think it's weird. They think it should turn like a car. Yes, counter steering but again, it's not the fastest way around the corner:) It's the only way around the corner, at speed, on a motorcycle. No it's not.... if you are countersteering, your drive wheel is way outside the most efficient line and needs to come back before you can get traction and get out of the corner... You countersteer to get the bike to lean, once leaned you can skid on around. But, you first have to get the turn started. Trust me, .01 seconds coming in and going out...Way too much sideways, not enough forward.... Look, I put the stopwatch to this **** every day, I trained my daughter to corner "as good as any body in the division"... But I am not gonna' argue any more with it. Let me take it one step further... I get what you are saying Dick but that's old school... we now "get the turn started" by drawing slightly on the front brake and using throttle (not brakes) to break away the back end. Now I can "get into the corner" without spending all that time (.003 seconds??) wobbling back and fourth instead of going forward... I know it seems like a tiny thing, but again, the secret I just told you is "very new school" and Jess was one of the first to embrace it three years ago..... It works, period. I saw her corner circles around a WMA pro a few weeks back... Jaws dropped for sure... Fine. You're dirt riding and sliding, without leaning for the turn. You're not really 'steering' through the turn but sliding through the turn. However, if she's turning left and she leans the bike to the left, she did it by countersteering. Ok, guess we won't see eye to eye. I think of counter steering as turning left, with the bars slightly right.... Either way, here's another thing to take into consideration... "New School" is to steer with the back end, not the front end anyway:) If the bike is leaning, you are not going straight. Unless you turn the front wheel. Leaning the bike, changes angles. Think like trying to make a cone roll in a straight line. leaning the bike, inplies a cone shape. |
A real dirt bike...
On 2/12/2014 1:09 PM, Bill McKee wrote:
On 2/12/14, 10:02 AM, KC wrote: On 2/12/2014 12:38 PM, Poco Loco wrote: On Wed, 12 Feb 2014 12:12:22 -0500, KC wrote: On 2/12/2014 12:03 PM, KC wrote: On 2/12/2014 11:40 AM, Poco Loco wrote: On Wed, 12 Feb 2014 11:38:48 -0500, KC wrote: On 2/12/2014 11:20 AM, Poco Loco wrote: On Wed, 12 Feb 2014 10:33:01 -0500, KC wrote: On 2/12/2014 10:06 AM, Mr. Luddite wrote: On 2/12/2014 9:42 AM, Poco Loco wrote: On Wed, 12 Feb 2014 09:06:41 -0500, BAR wrote: In article , __ says... Mr. Luddite wrote: On 2/9/2014 6:25 PM, Poco Loco wrote: On Sun, 9 Feb 2014 15:03:40 -0800 (PST), Tim wrote: On Sunday, February 9, 2014 4:30:04 PM UTC-6, John H. wrote: On Sun, 9 Feb 2014 13:31:40 -0800 (PST), Tim wrote: On Sunday, February 9, 2014 7:31:31 AM UTC-6, F.O.A.D. wrote: I'd love to have one of these... http://www.youtube.com/watch?v=U7mTwM7afQA how about something like this? http://thekneeslider.com/1937-front-...cle-prototype/ Looks like something Moto Guzzi made during the war. "Goose" probably tries something like that too, but this is French, and the French at that time were known to be great tinkerers, with results to match. Yeah, I should have said it looks like something Guzzi *could* have made during the war. Something like this: http://www.youtube.com/watch?v=4cOlS_ShXf4 Here's an idea for Scott: (warning - contains boating content) http://www.elrellano.com/videos_online/8146/barca-a-motor.html No steering unless that rowboat has a bow thruster. Just like a motor cycle, you just lean into the turn to make it go that way. No, leaning doesn't make it turn. Leaning enables the motorcycle to be kept more vertical when turning. Pushing on the handlebar makes you turn. Push left, go left. Push right, go right. Countersteering. Heh. I just mentioned to Scott about that. Those who don't ride will think it's weird. They think it should turn like a car. Yes, counter steering but again, it's not the fastest way around the corner:) It's the only way around the corner, at speed, on a motorcycle. No it's not.... if you are countersteering, your drive wheel is way outside the most efficient line and needs to come back before you can get traction and get out of the corner... You countersteer to get the bike to lean, once leaned you can skid on around. But, you first have to get the turn started. Trust me, .01 seconds coming in and going out...Way too much sideways, not enough forward.... Look, I put the stopwatch to this **** every day, I trained my daughter to corner "as good as any body in the division"... But I am not gonna' argue any more with it. Let me take it one step further... I get what you are saying Dick but that's old school... we now "get the turn started" by drawing slightly on the front brake and using throttle (not brakes) to break away the back end. Now I can "get into the corner" without spending all that time (.003 seconds??) wobbling back and fourth instead of going forward... I know it seems like a tiny thing, but again, the secret I just told you is "very new school" and Jess was one of the first to embrace it three years ago..... It works, period. I saw her corner circles around a WMA pro a few weeks back... Jaws dropped for sure... Fine. You're dirt riding and sliding, without leaning for the turn. You're not really 'steering' through the turn but sliding through the turn. However, if she's turning left and she leans the bike to the left, she did it by countersteering. Ok, guess we won't see eye to eye. I think of counter steering as turning left, with the bars slightly right.... Either way, here's another thing to take into consideration... "New School" is to steer with the back end, not the front end anyway:) If the bike is leaning, you are not going straight. Unless you turn the front wheel. Leaning the bike, changes angles. Think like trying to make a cone roll in a straight line. leaning the bike, inplies a cone shape. Yup, and rolling a cone with a small end on the left will turn left.. even for a while if one side loses "some" traction.. At some point however if you lose too much traction on one side the cone would roll right or have to be "counter steered".. At that point, forward force degrades... I gotta' find that video... |
A real dirt bike...
On 2/12/2014 11:37 AM, KC wrote:
On 2/12/2014 11:23 AM, HanK wrote: On 2/12/2014 10:40 AM, KC wrote: On 2/12/2014 10:31 AM, KC wrote: On 2/12/2014 10:04 AM, Mr. Luddite wrote: On 2/12/2014 9:36 AM, KC wrote: On 2/12/2014 9:17 AM, Mr. Luddite wrote: On 2/12/2014 8:09 AM, Poco Loco wrote: On Tue, 11 Feb 2014 20:27:03 -0500, Earl__ wrote: Mr. Luddite wrote: On 2/9/2014 6:25 PM, Poco Loco wrote: On Sun, 9 Feb 2014 15:03:40 -0800 (PST), Tim wrote: On Sunday, February 9, 2014 4:30:04 PM UTC-6, John H. wrote: On Sun, 9 Feb 2014 13:31:40 -0800 (PST), Tim wrote: On Sunday, February 9, 2014 7:31:31 AM UTC-6, F.O.A.D. wrote: I'd love to have one of these... http://www.youtube.com/watch?v=U7mTwM7afQA how about something like this? http://thekneeslider.com/1937-front-...cle-prototype/ Looks like something Moto Guzzi made during the war. "Goose" probably tries something like that too, but this is French, and the French at that time were known to be great tinkerers, with results to match. Yeah, I should have said it looks like something Guzzi *could* have made during the war. Something like this: http://www.youtube.com/watch?v=4cOlS_ShXf4 Here's an idea for Scott: (warning - contains boating content) http://www.elrellano.com/videos_online/8146/barca-a-motor.html No steering unless that rowboat has a bow thruster. That boat is a high technology marvel incorporating 'eyeball sensormatic rotational assist'. Where you look is where you go. A sign on the bow says, "Don't look at women when operating this vessel." Sometimes the sign gets torn away. When I was a kid I had a 12' aluminum boat with a little 3hp outboard. I'd tighten the tension on the steering so the motor wouldn't move, sit in the middle seat and steer just by leaning towards one side or the other. Worked fine in large ponds. Somebody said "like a motorcycle"... But if you simply lean a motorcycle and don't turn the wheel, it will still go straight... Just sayin'. No, you have to tip the boat. Speaking of motorcycles, ever try this? Ride going straight ahead and push your *left* handlebar forward gently and see which way you turn. Then try with the *right* handlebar. Yeah, that's how she takes every turn... Reverse steer. Add in breaking loose the rear tire and you are starting to have some fun however, if you do though, you are losing time going sideways instead of forward:) Just reread that... I should say she counter steers when the suspension or body position is off... But it's not the fastest way around the track... What is the fastest way around the track? Ok, the fastest way involves being efficient in the corners. If you are countersteering n a corner, you are standing the bike too high, and the drive wheel is not taking the shortest distance around the corner. In racing terms, you blew out the birm.. It's not efficient to have that back tire way out there cause then it takes time to bring it back... How can you be efficient in the corners? |
A real dirt bike...
On 2/12/2014 11:40 AM, Poco Loco wrote:
On Wed, 12 Feb 2014 11:38:48 -0500, KC wrote: On 2/12/2014 11:20 AM, Poco Loco wrote: On Wed, 12 Feb 2014 10:33:01 -0500, KC wrote: On 2/12/2014 10:06 AM, Mr. Luddite wrote: On 2/12/2014 9:42 AM, Poco Loco wrote: On Wed, 12 Feb 2014 09:06:41 -0500, BAR wrote: In article , __ says... Mr. Luddite wrote: On 2/9/2014 6:25 PM, Poco Loco wrote: On Sun, 9 Feb 2014 15:03:40 -0800 (PST), Tim wrote: On Sunday, February 9, 2014 4:30:04 PM UTC-6, John H. wrote: On Sun, 9 Feb 2014 13:31:40 -0800 (PST), Tim wrote: On Sunday, February 9, 2014 7:31:31 AM UTC-6, F.O.A.D. wrote: I'd love to have one of these... http://www.youtube.com/watch?v=U7mTwM7afQA how about something like this? http://thekneeslider.com/1937-front-...cle-prototype/ Looks like something Moto Guzzi made during the war. "Goose" probably tries something like that too, but this is French, and the French at that time were known to be great tinkerers, with results to match. Yeah, I should have said it looks like something Guzzi *could* have made during the war. Something like this: http://www.youtube.com/watch?v=4cOlS_ShXf4 Here's an idea for Scott: (warning - contains boating content) http://www.elrellano.com/videos_online/8146/barca-a-motor.html No steering unless that rowboat has a bow thruster. Just like a motor cycle, you just lean into the turn to make it go that way. No, leaning doesn't make it turn. Leaning enables the motorcycle to be kept more vertical when turning. Pushing on the handlebar makes you turn. Push left, go left. Push right, go right. Countersteering. Heh. I just mentioned to Scott about that. Those who don't ride will think it's weird. They think it should turn like a car. Yes, counter steering but again, it's not the fastest way around the corner:) It's the only way around the corner, at speed, on a motorcycle. No it's not.... if you are countersteering, your drive wheel is way outside the most efficient line and needs to come back before you can get traction and get out of the corner... You countersteer to get the bike to lean, once leaned you can skid on around. But, you first have to get the turn started. When are you going to divulge that you are a MSF instructor?;-) |
All times are GMT +1. The time now is 01:19 PM. |
Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 BoatBanter.com