BoatBanter.com

BoatBanter.com (https://www.boatbanter.com/)
-   General (https://www.boatbanter.com/general/)
-   -   33 Foot Boat sinks off Key West While Pulling Anchor From Stern (https://www.boatbanter.com/general/150700-33-foot-boat-sinks-off-key-west-while-pulling-anchor-stern.html)

Happy John January 6th 12 08:56 PM

33 Foot Boat sinks off Key West While Pulling Anchor From Stern
 
On Thu, 5 Jan 2012 19:12:23 -0800 (PST), Tim wrote:

On Jan 5, 3:44*pm, Happy John wrote:
On Thu, 05 Jan 2012 12:19:56 -0500, Oscar wrote:
On 1/5/2012 12:04 PM, Happy John wrote:
On Wed, 04 Jan 2012 22:04:59 -0500, wrote:


On Wed, 4 Jan 2012 17:42:34 -0800 (PST),
wrote:


On Dec 29 2011, 9:09 am, wrote:
On Thu, 29 Dec 2011 01:33:27 -0500, Wayne.B


*wrote:


http://www.winknews.com/Local-Florida/2011-12-28/Boat-sinks-off-Key-W...


According to the news report they pulled the anchor from the stern
after it became stuck.


"We put it back on the stern to bring it up and we had power on it
and when we had let go, it snatched back and the waves filled the
stern up with water"


It's not clear if it was a low transom boat or not but it sounds like
it might have been.


They were saved by their EPIRB and life raft.


It is a recipe for disaster *to shorten the scope of the anchor line
and tug from the stern. Hell, anchoring from the stern isn't a good
idea, either, and for them same reasons.


I wonder how close to being drug under water the stern was, before the
stretchy rode yanked them back.


This guy isn't "unlucky", he's just stupid.


Maybe be just wasn't thinking with all the calamity? He might have
been 'lucky' hundreds of times, but this one really payed off...


I definitely would have cut the line. *that is if i would have
thought about it.


I still think these guys took a running start at this, based on what
the mate said on TV and when it didn't break the anchor loose they
snapped back and sunk the boat. I doubt they had time to cut the line.


I'd have cut my line before trying to use the engine to loosen the anchor. I just can't imaging
doing that.


Pansy! But you wouldn't have stern anchored in the first place anyway.


Yup. I'm a pansy. The only time I use a stern anchor is at a boaters' beach.


I've found out that the type of boating I do, a cement foundation
block on an old ski rope is most effective, and if lost, well.... it's
easily and economically replaced


I'd be worried about the concrete scratching the bottom of my boat. I just use a danforth type.
Small one for the beach, larger one for the bay or deeper water. The small one, four pounder, I
think, fits in an old back pack, along with some line. Works great at the beach.

Happy John January 6th 12 08:59 PM

33 Foot Boat sinks off Key West While Pulling Anchor From Stern
 
On Fri, 06 Jan 2012 09:12:31 -0500, Oscar wrote:

On 1/6/2012 7:54 AM, Tim wrote:
On Jan 5, 11:09 pm, wrote:
On Thu, 5 Jan 2012 19:12:23 -0800 (PST),
wrote:

I've found out that the type of boating I do, a cement foundation
block on an old ski rope is most effective, and if lost, well.... it's
easily and economically replaced

For far less than the weight of a CMU you can find a tiny danforth
style that will have a lot more holding power.
That can make a huge difference at the end of the day if you are
pulling this up every hour or so.
If you are anchoring in a rocky area and think you will be losing
anchors you can make one with #4 Rebar that will bend itself free on a
hard tug and if it is really stuck, you are not out much if you cut it
free.
I have seen them tied up with baling wire but I usually welded them up
when I was banging them out for fishermen I knew. You can also put
this on an expendable rode.


But Greg. The block was standard equipment when I bought the boat....

I know what you're saying if you use it a lot, that would get
obnoxious.


Do you carry a spare anchor in case it chafes through the clothes line
it's tethered to the boat with. There isn't a red neck marine supply at
every bend in the river you know. ;-)


(There are a few things about Tim's boating that he should keep to himself. Private-like, if you
know what I mean.)

;)

iBoaterer[_2_] January 6th 12 09:11 PM

33 Foot Boat sinks off Key West While Pulling Anchor From Stern
 
In article ,
says...

On Fri, 06 Jan 2012 09:12:31 -0500, Oscar
wrote:

On 1/6/2012 7:54 AM, Tim wrote:
On Jan 5, 11:09 pm, wrote:
On Thu, 5 Jan 2012 19:12:23 -0800 (PST),
wrote:

I've found out that the type of boating I do, a cement foundation
block on an old ski rope is most effective, and if lost, well.... it's
easily and economically replaced

For far less than the weight of a CMU you can find a tiny danforth
style that will have a lot more holding power.
That can make a huge difference at the end of the day if you are
pulling this up every hour or so.
If you are anchoring in a rocky area and think you will be losing
anchors you can make one with #4 Rebar that will bend itself free on a
hard tug and if it is really stuck, you are not out much if you cut it
free.
I have seen them tied up with baling wire but I usually welded them up
when I was banging them out for fishermen I knew. You can also put
this on an expendable rode.

But Greg. The block was standard equipment when I bought the boat....

I know what you're saying if you use it a lot, that would get
obnoxious.


Do you carry a spare anchor in case it chafes through the clothes line
it's tethered to the boat with. There isn't a red neck marine supply at
every bend in the river you know. ;-)



You just drift fish until you come across another construction site
near the river.


Exactly!!! Or look for a BFR!

Happy John January 6th 12 11:56 PM

33 Foot Boat sinks off Key West While Pulling Anchor From Stern
 
On Fri, 06 Jan 2012 16:02:55 -0500, wrote:

On Fri, 06 Jan 2012 09:12:31 -0500, Oscar
wrote:

On 1/6/2012 7:54 AM, Tim wrote:
On Jan 5, 11:09 pm, wrote:
On Thu, 5 Jan 2012 19:12:23 -0800 (PST),
wrote:

I've found out that the type of boating I do, a cement foundation
block on an old ski rope is most effective, and if lost, well.... it's
easily and economically replaced

For far less than the weight of a CMU you can find a tiny danforth
style that will have a lot more holding power.
That can make a huge difference at the end of the day if you are
pulling this up every hour or so.
If you are anchoring in a rocky area and think you will be losing
anchors you can make one with #4 Rebar that will bend itself free on a
hard tug and if it is really stuck, you are not out much if you cut it
free.
I have seen them tied up with baling wire but I usually welded them up
when I was banging them out for fishermen I knew. You can also put
this on an expendable rode.

But Greg. The block was standard equipment when I bought the boat....

I know what you're saying if you use it a lot, that would get
obnoxious.


Do you carry a spare anchor in case it chafes through the clothes line
it's tethered to the boat with. There isn't a red neck marine supply at
every bend in the river you know. ;-)



You just drift fish until you come across another construction site
near the river.


LOL!


All times are GMT +1. The time now is 03:53 PM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 BoatBanter.com