On Aug 17, 5:11*am, " wrote:
On Tue, 16 Aug 2011 20:21:33 -0400, wrote:
On Tue, 16 Aug 2011 15:43:22 -0400, "
wrote:

Which end seems to be stuck, the front or the back?

The front

This is the scary part. If this is still just corrosion on the front
locating pin it won't cause any damage when it finally pulls free but
if this is the shaft coupler for the shifter, it could pull the shaft
out of the foot. There is only a single jesus clip holding it in. If
that happens, there is a very good chance the cam will fly out and you
are going into the foot to fix it. I would believe if that was what
was hanging you up there should be a little free play.
I assume by now you have all of the white powder out of the bolt
holes. One of those heavy duty dental picks they sell at harbor fright
can help there. WD 40 seems to soften it up.

Thanks, BB Friday, I'm off to DC

Tea Party gals doing a pole-dancing fundraiser?


Paul

On Aug 20, 11:06*pm, "Paul Duca )"
wrote:
On Aug 17, 5:11*am, " wrote:









On Tue, 16 Aug 2011 20:21:33 -0400, wrote:
On Tue, 16 Aug 2011 15:43:22 -0400, "
wrote:

Which end seems to be stuck, the front or the back?

The front

This is the scary part. If this is still just corrosion on the front
locating pin it won't cause any damage when it finally pulls free but
if this is the shaft coupler for the shifter, it could pull the shaft
out of the foot. There is only a single jesus clip holding it in. If
that happens, there is a very good chance the cam will fly out and you
are going into the foot to fix it. I would believe if that was what
was hanging you up there should be a little free play.
I assume by now you have all of the white powder out of the bolt
holes. One of those heavy duty dental picks they sell at harbor fright
can help there. WD 40 seems to soften it up.

Thanks, BB Friday, I'm off to DC

Tea Party gals doing a pole-dancing fundraiser?

Paul


Hello, Krause

On Aug 20, 11:05*pm, "Paul Duca )"
wrote:
On Aug 13, 3:40*pm, wrote:









On Sat, 13 Aug 2011 15:12:25 -0400, "

wrote:
On Sat, 13 Aug 2011 10:51:18 -0700, wrote:

On Sat, 13 Aug 2011 12:49:59 -0400, X ~ Man
wrote:

On 8/13/11 12:28 PM, wrote:
On Sat, 13 Aug 2011 12:20:27 -0400, "
*wrote:

On Fri, 12 Aug 2011 20:18:13 -0700, wrote:

On Fri, 12 Aug 2011 22:52:10 -0400, "
*wrote:

On Mon, 08 Aug 2011 06:56:03 -0400, X -
wrote:

On 8/7/11 6:07 PM, wrote:
How do I dissolve corrosion between upper and lower outboard unit so
to get at the impeller?

I took all five nuts off (125 mercury sal****er) the studs holding the
lower unit on. I had to use penetrating spray to get the washers off.

After whacking the seam dividing the upper and lower with a rubber
hammer till blue in the face I etched/scored/scratched the seam to
allow penetration spray to work in, nothing.

After 24 hours of repeated spraying whacking and more scoring, the two
halves still won't come apart. Short of pounding in a chisel (gouging
aluminum), and prying them apart, anyone have an idea?

Try a boating discussion board. Rec.Boats is a vehicle for right-wing
trash to whine about President Obama and for those few of us centrists
or slightly left of center here to laugh at the righties.

You're becoming an island onto your self. Even the RATS are abandoning
Oboobuh's dingy

CB
...
"The debt ceiling should not be something that is used as a gun
against the heads of the American people to extract tax breaks for
corporate jet owners or oil and gas companies that are making billions
of dollars," Obama said during a town hall that featured questions
posed through the online social network Twitter.
...
http://finance.yahoo.com/news/GOP-sh...ma-apf-3138547...

What class

Here's a cartoon of the Classless One
http://global.nationalreview.com/ima...oll_101129.jpg

Whoooo... another right wing moron. Just what the laugh-o-meter
ordered.

An organization such as 'A noiseless patient Spider' does nothing but
spins a web of deceit, lay in wait for (See: Chicago Obama Rezko)
opportunity, *pounces and devours. That's you.

47% of people pay no taxes in America. As a spider (see: emdeplume's
header) you understand the meaning of leeching off your host.

I suppose you extend this disdain to all posting from that
"organization?"

Wow...the two new assholes who are really one guy are chatting each
other up.

He might forget and hurt himself.

Are you a Legion onto your self?

CB

No. You're a moron unto yourself, however.

Having a boat is just one of the many ways CB likes to remind the
rabble how much better he is.

Paul

Hello, Krause

On Aug 21, 3:51*am, TopBassDog wrote:
On Aug 20, 11:06*pm, "Paul Duca )"



wrote:
On Aug 17, 5:11*am, " wrote:

On Tue, 16 Aug 2011 20:21:33 -0400, wrote:
On Tue, 16 Aug 2011 15:43:22 -0400, "
wrote:

Which end seems to be stuck, the front or the back?

The front

This is the scary part. If this is still just corrosion on the front
locating pin it won't cause any damage when it finally pulls free but
if this is the shaft coupler for the shifter, it could pull the shaft
out of the foot. There is only a single jesus clip holding it in. If
that happens, there is a very good chance the cam will fly out and you
are going into the foot to fix it. I would believe if that was what
was hanging you up there should be a little free play.
I assume by now you have all of the white powder out of the bolt
holes. One of those heavy duty dental picks they sell at harbor fright
can help there. WD 40 seems to soften it up.

Thanks, BB Friday, I'm off to DC

Tea Party gals doing a pole-dancing fundraiser?

Paul

Hello, Krause

No, that is my actual name and one of my email addresses at the
top...unlike CB, I don't have to hide under something fake because I
do nothing but spew bile--even when asking for help fixing a boat.

Paul

On Aug 21, 3:52*am, TopBassDog wrote:
On Aug 20, 11:05*pm, "Paul Duca )"



wrote:
On Aug 13, 3:40*pm, wrote:

On Sat, 13 Aug 2011 15:12:25 -0400, "

wrote:
On Sat, 13 Aug 2011 10:51:18 -0700, wrote:

On Sat, 13 Aug 2011 12:49:59 -0400, X ~ Man
wrote:

On 8/13/11 12:28 PM, wrote:
On Sat, 13 Aug 2011 12:20:27 -0400, "
*wrote:

On Fri, 12 Aug 2011 20:18:13 -0700, wrote:

On Fri, 12 Aug 2011 22:52:10 -0400, "
*wrote:

On Mon, 08 Aug 2011 06:56:03 -0400, X -
wrote:

On 8/7/11 6:07 PM, wrote:
How do I dissolve corrosion between upper and lower outboard unit so
to get at the impeller?

I took all five nuts off (125 mercury sal****er) the studs holding the
lower unit on. I had to use penetrating spray to get the washers off.

After whacking the seam dividing the upper and lower with a rubber
hammer till blue in the face I etched/scored/scratched the seam to
allow penetration spray to work in, nothing.

After 24 hours of repeated spraying whacking and more scoring, the two
halves still won't come apart. Short of pounding in a chisel (gouging
aluminum), and prying them apart, anyone have an idea?

Try a boating discussion board. Rec.Boats is a vehicle for right-wing
trash to whine about President Obama and for those few of us centrists
or slightly left of center here to laugh at the righties.

You're becoming an island onto your self. Even the RATS are abandoning
Oboobuh's dingy

CB
...
"The debt ceiling should not be something that is used as a gun
against the heads of the American people to extract tax breaks for
corporate jet owners or oil and gas companies that are making billions
of dollars," Obama said during a town hall that featured questions
posed through the online social network Twitter.
...
http://finance.yahoo.com/news/GOP-sh...ma-apf-3138547...

What class

Here's a cartoon of the Classless One
http://global.nationalreview.com/ima...oll_101129.jpg

Whoooo... another right wing moron. Just what the laugh-o-meter
ordered.

An organization such as 'A noiseless patient Spider' does nothing but
spins a web of deceit, lay in wait for (See: Chicago Obama Rezko)
opportunity, *pounces and devours. That's you.

47% of people pay no taxes in America. As a spider (see: emdeplume's
header) you understand the meaning of leeching off your host.

I suppose you extend this disdain to all posting from that
"organization?"

Wow...the two new assholes who are really one guy are chatting each
other up.

He might forget and hurt himself.

Are you a Legion onto your self?

CB

No. You're a moron unto yourself, however.

Having a boat is just one of the many ways CB likes to remind the
rabble how much better he is.

Paul

Hello, Krause

?

Paul

On 8/21/2011 3:51 AM, TopBassDog wrote:
On Aug 20, 11:06 pm, "Paul Duca )"
wrote:
On Aug 17, 5:11 am, wrote:

Thanks, BB Friday, I'm off to DC

Tea Party gals doing a pole-dancing fundraiser?

Paul


Hello, Krause

Not Krause. This guy is 47 years old.

In article ,
says...

On Sun, 21 Aug 2011 00:52:01 -0700 (PDT), TopBassDog
wrote:

On Aug 20, 11:05*pm, "Paul Duca )"
wrote:
On Aug 13, 3:40*pm, wrote:









On Sat, 13 Aug 2011 15:12:25 -0400, "

wrote:
On Sat, 13 Aug 2011 10:51:18 -0700, wrote:

On Sat, 13 Aug 2011 12:49:59 -0400, X ~ Man
wrote:

On 8/13/11 12:28 PM, wrote:
On Sat, 13 Aug 2011 12:20:27 -0400, "
*wrote:

On Fri, 12 Aug 2011 20:18:13 -0700, wrote:

On Fri, 12 Aug 2011 22:52:10 -0400, "
*wrote:

On Mon, 08 Aug 2011 06:56:03 -0400, X -
wrote:

On 8/7/11 6:07 PM, wrote:
How do I dissolve corrosion between upper and lower outboard unit so
to get at the impeller?

I took all five nuts off (125 mercury sal****er) the studs holding the
lower unit on. I had to use penetrating spray to get the washers off.

After whacking the seam dividing the upper and lower with a rubber
hammer till blue in the face I etched/scored/scratched the seam to
allow penetration spray to work in, nothing.

After 24 hours of repeated spraying whacking and more scoring, the two
halves still won't come apart. Short of pounding in a chisel (gouging
aluminum), and prying them apart, anyone have an idea?

Try a boating discussion board. Rec.Boats is a vehicle for right-wing
trash to whine about President Obama and for those few of us centrists
or slightly left of center here to laugh at the righties.

You're becoming an island onto your self. Even the RATS are abandoning
Oboobuh's dingy

CB
...
"The debt ceiling should not be something that is used as a gun
against the heads of the American people to extract tax breaks for
corporate jet owners or oil and gas companies that are making billions
of dollars," Obama said during a town hall that featured questions
posed through the online social network Twitter.
...
http://finance.yahoo.com/news/GOP-sh...ma-apf-3138547...

What class

Here's a cartoon of the Classless One
http://global.nationalreview.com/ima...oll_101129.jpg

Whoooo... another right wing moron. Just what the laugh-o-meter
ordered.

An organization such as 'A noiseless patient Spider' does nothing but
spins a web of deceit, lay in wait for (See: Chicago Obama Rezko)
opportunity, *pounces and devours. That's you.

47% of people pay no taxes in America. As a spider (see: emdeplume's
header) you understand the meaning of leeching off your host.

I suppose you extend this disdain to all posting from that
"organization?"

Wow...the two new assholes who are really one guy are chatting each
other up.

He might forget and hurt himself.

Are you a Legion onto your self?

CB

No. You're a moron unto yourself, however.

Having a boat is just one of the many ways CB likes to remind the
rabble how much better he is.

Paul

Hello, Krause

Seriously, you guys see Krause in every shadow, cloud, and ink blot.

This poster, whoever it is, is in or near Brockton, MA. You guys are
SO OBSESSED.

Krause has you so in his power and under his thumb it is incredible.
More incredible is you'll swear it isn't so.

Well, I suppose the same could be said of you.

On Sun, 21 Aug 2011 12:31:34 -0400, iBoat More wrote:

In article ,
says...

On Sun, 21 Aug 2011 00:52:01 -0700 (PDT), TopBassDog
wrote:

On Aug 20, 11:05*pm, "Paul Duca )"
wrote:
On Aug 13, 3:40*pm, wrote:









On Sat, 13 Aug 2011 15:12:25 -0400, "

wrote:
On Sat, 13 Aug 2011 10:51:18 -0700, wrote:

On Sat, 13 Aug 2011 12:49:59 -0400, X ~ Man
wrote:

On 8/13/11 12:28 PM, wrote:
On Sat, 13 Aug 2011 12:20:27 -0400, "
*wrote:

On Fri, 12 Aug 2011 20:18:13 -0700, wrote:

On Fri, 12 Aug 2011 22:52:10 -0400, "
*wrote:

On Mon, 08 Aug 2011 06:56:03 -0400, X -
wrote:

On 8/7/11 6:07 PM, wrote:
How do I dissolve corrosion between upper and lower outboard unit so
to get at the impeller?

I took all five nuts off (125 mercury sal****er) the studs holding the
lower unit on. I had to use penetrating spray to get the washers off.

After whacking the seam dividing the upper and lower with a rubber
hammer till blue in the face I etched/scored/scratched the seam to
allow penetration spray to work in, nothing.

After 24 hours of repeated spraying whacking and more scoring, the two
halves still won't come apart. Short of pounding in a chisel (gouging
aluminum), and prying them apart, anyone have an idea?

Try a boating discussion board. Rec.Boats is a vehicle for right-wing
trash to whine about President Obama and for those few of us centrists
or slightly left of center here to laugh at the righties.

You're becoming an island onto your self. Even the RATS are abandoning
Oboobuh's dingy

CB
...
"The debt ceiling should not be something that is used as a gun
against the heads of the American people to extract tax breaks for
corporate jet owners or oil and gas companies that are making billions
of dollars," Obama said during a town hall that featured questions
posed through the online social network Twitter.
...
http://finance.yahoo.com/news/GOP-sh...ma-apf-3138547...

What class

Here's a cartoon of the Classless One
http://global.nationalreview.com/ima...oll_101129.jpg

Whoooo... another right wing moron. Just what the laugh-o-meter
ordered.

An organization such as 'A noiseless patient Spider' does nothing but
spins a web of deceit, lay in wait for (See: Chicago Obama Rezko)
opportunity, *pounces and devours. That's you.

47% of people pay no taxes in America. As a spider (see: emdeplume's
header) you understand the meaning of leeching off your host.

I suppose you extend this disdain to all posting from that
"organization?"

Wow...the two new assholes who are really one guy are chatting each
other up.

He might forget and hurt himself.

Are you a Legion onto your self?

CB

No. You're a moron unto yourself, however.

Having a boat is just one of the many ways CB likes to remind the
rabble how much better he is.

Paul

Hello, Krause

Seriously, you guys see Krause in every shadow, cloud, and ink blot.

This poster, whoever it is, is in or near Brockton, MA. You guys are
SO OBSESSED.

Krause has you so in his power and under his thumb it is incredible.
More incredible is you'll swear it isn't so.

Well, I suppose the same could be said of you.

Given that admission, do you think being under his thumb is a 'good thing'?

In article ,
says...

On Sun, 21 Aug 2011 12:31:34 -0400, iBoat More wrote:

In article ,
says...

On Sun, 21 Aug 2011 00:52:01 -0700 (PDT), TopBassDog
wrote:

On Aug 20, 11:05*pm, "Paul Duca )"
wrote:
On Aug 13, 3:40*pm, wrote:









On Sat, 13 Aug 2011 15:12:25 -0400, "

wrote:
On Sat, 13 Aug 2011 10:51:18 -0700, wrote:

On Sat, 13 Aug 2011 12:49:59 -0400, X ~ Man
wrote:

On 8/13/11 12:28 PM, wrote:
On Sat, 13 Aug 2011 12:20:27 -0400, "
*wrote:

On Fri, 12 Aug 2011 20:18:13 -0700, wrote:

On Fri, 12 Aug 2011 22:52:10 -0400, "
*wrote:

On Mon, 08 Aug 2011 06:56:03 -0400, X -
wrote:

On 8/7/11 6:07 PM, wrote:
How do I dissolve corrosion between upper and lower outboard unit so
to get at the impeller?

I took all five nuts off (125 mercury sal****er) the studs holding the
lower unit on. I had to use penetrating spray to get the washers off.

After whacking the seam dividing the upper and lower with a rubber
hammer till blue in the face I etched/scored/scratched the seam to
allow penetration spray to work in, nothing.

After 24 hours of repeated spraying whacking and more scoring, the two
halves still won't come apart. Short of pounding in a chisel (gouging
aluminum), and prying them apart, anyone have an idea?

Try a boating discussion board. Rec.Boats is a vehicle for right-wing
trash to whine about President Obama and for those few of us centrists
or slightly left of center here to laugh at the righties.

You're becoming an island onto your self. Even the RATS are abandoning
Oboobuh's dingy

CB
...
"The debt ceiling should not be something that is used as a gun
against the heads of the American people to extract tax breaks for
corporate jet owners or oil and gas companies that are making billions
of dollars," Obama said during a town hall that featured questions
posed through the online social network Twitter.
...
http://finance.yahoo.com/news/GOP-sh...ma-apf-3138547...

What class

Here's a cartoon of the Classless One
http://global.nationalreview.com/ima...oll_101129.jpg

Whoooo... another right wing moron. Just what the laugh-o-meter
ordered.

An organization such as 'A noiseless patient Spider' does nothing but
spins a web of deceit, lay in wait for (See: Chicago Obama Rezko)
opportunity, *pounces and devours. That's you.

47% of people pay no taxes in America. As a spider (see: emdeplume's
header) you understand the meaning of leeching off your host.

I suppose you extend this disdain to all posting from that
"organization?"

Wow...the two new assholes who are really one guy are chatting each
other up.

He might forget and hurt himself.

Are you a Legion onto your self?

CB

No. You're a moron unto yourself, however.

Having a boat is just one of the many ways CB likes to remind the
rabble how much better he is.

Paul

Hello, Krause

Seriously, you guys see Krause in every shadow, cloud, and ink blot.

This poster, whoever it is, is in or near Brockton, MA. You guys are
SO OBSESSED.

Krause has you so in his power and under his thumb it is incredible.
More incredible is you'll swear it isn't so.

Well, I suppose the same could be said of you.

Given that admission, do you think being under his thumb is a 'good thing'?

There's that **** again. Like Scotty said, you think you are so much
above everybody else. Yet you find it quite exceptable to come here and
post your far right wing political crap trying to get somebody to
respond. Kind of reminds one of Harry.

On 20/08/2011 10:06 PM, Paul Duca ) wrote:
On Aug 17, 5:11 am, wrote:
On Tue, 16 Aug 2011 20:21:33 -0400, wrote:
On Tue, 16 Aug 2011 15:43:22 -0400, "
wrote:

Which end seems to be stuck, the front or the back?

The front

This is the scary part. If this is still just corrosion on the front
locating pin it won't cause any damage when it finally pulls free but
if this is the shaft coupler for the shifter, it could pull the shaft
out of the foot. There is only a single jesus clip holding it in. If
that happens, there is a very good chance the cam will fly out and you
are going into the foot to fix it. I would believe if that was what
was hanging you up there should be a little free play.
I assume by now you have all of the white powder out of the bolt
holes. One of those heavy duty dental picks they sell at harbor fright
can help there. WD 40 seems to soften it up.

Thanks, BB Friday, I'm off to DC

Tea Party gals doing a pole-dancing fundraiser?


Paul

At least one, Amber Lee Ettinger (Obama Girl) woke up when she got her
tax bill. Then discovered Obama is full of ****.


--
Flea party (leftie) fear, begets flea party smear.