Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #31   Report Post  
posted to rec.boats
external usenet poster
 
First recorded activity by BoatBanter: Jul 2011
Posts: 183
Default Atlanta - a Wonderful City

In article , says...

On 7/27/11 11:17 AM, I_am_Tosk wrote:
In aweb.com, "not a
says...

On 7/27/2011 9:22 AM, basskisser wrote:
I_am_Tosk wrote:


Uh, I fixed the pw within an hour or so.... Never had one apart
before. And as to wrenching, don't be a douchbag pig boy, Jessica and
I do all the work on the bike. We did a top end with piston, rings,
valves (shop cut valve seats and honed piston) and a few other minor
parts. She did 90% of the work with me offering guidance on spoooging
the thing with oil and I used the torque wrench. She did the rest from
sliding the cylinder over the piston, to lining up the timing chain
and cams. The thing starts first kick, I am very proud of her and we
saved almost 600 bucks doing the job ourselves... Now, back to the
filter with you pig boy, go clean your yard...


Cool. I love doing top ends!
Nice when she fires right up too!
Don't expect the fleabaggers to understand this!

Those so called fleabaggers don't have any appreciation for the
satisfaction do it yourselfers get from completeing a task without
having to pay someone to do it.


It was comical... The two of us in full panic attack mode for about 4
hours But we did it, and it's been running fine, starting with a kick
or two for over a week now and that's a lot of engine on time for us...



Tosk conversing with the ID spoofer as if he isn't the ID spoofer and of
course, is being played. Priceless.


You stupid damned spoofer. YOU are spoofing and being spoofed at the
same time and are too stupid to know it, Loogy.
  #32   Report Post  
posted to rec.boats
external usenet poster
 
First recorded activity by BoatBanter: Jul 2011
Posts: 74
Default Atlanta - a Wonderful City

On 7/27/2011 11:39 AM, X-Man wrote:
On 7/27/11 9:15 AM, Florida Jim wrote:
On 7/27/2011 8:49 AM, North Star wrote:
On Jul 27, 8:56 am, wrote:
On 7/27/11 2:51 AM, I_am_Tosk wrote:

In article84674639-d842-4517-be66-bfd1ae004e89
@e40g2000yqn.googlegroups.com, says...

On Jul 26, 6:43 pm, wrote:
Enough said right there!

Oh look, it's Loogy......

Uh, no... It's Harry. To many of us have been ignoring him so he is
starting the cycle of destruction again...

Oh, and once again the moron who claims to be a network maven who
operates an internet services company proves he knows no more about the
internet than he does about "wrenching" a winning motorbike.

Wrenching a motorbike???
He couldn't figure out what was wrong with a pressure washer.
Some mechanic.............. he must get his mechanical advice from
JohnnyH


Well then, JohhnyH must have steered him in the right direction since
the problem was reported resolved. Don't you wish your mentor knew
something about anything?


Not only are a an idiot, but you don't have the balls to post under your
real name and email address. Coward.


Is that the way you intended it to come out? Only Harry Krause could
butcher the English language so badly. You are Harry Krause, aren't you?
  #33   Report Post  
posted to rec.boats
external usenet poster
 
First recorded activity by BoatBanter: Jul 2011
Posts: 183
Default Atlanta - a Wonderful City

On 7/27/11 1:39 PM, Beach Bum wrote:
On 7/27/2011 11:39 AM, X-Man wrote:
On 7/27/11 9:15 AM, Florida Jim wrote:
On 7/27/2011 8:49 AM, North Star wrote:
On Jul 27, 8:56 am, wrote:
On 7/27/11 2:51 AM, I_am_Tosk wrote:

In article84674639-d842-4517-be66-bfd1ae004e89
@e40g2000yqn.googlegroups.com, says...

On Jul 26, 6:43 pm, wrote:
Enough said right there!

Oh look, it's Loogy......

Uh, no... It's Harry. To many of us have been ignoring him so he is
starting the cycle of destruction again...

Oh, and once again the moron who claims to be a network maven who
operates an internet services company proves he knows no more about
the
internet than he does about "wrenching" a winning motorbike.

Wrenching a motorbike???
He couldn't figure out what was wrong with a pressure washer.
Some mechanic.............. he must get his mechanical advice from
JohnnyH

Well then, JohhnyH must have steered him in the right direction since
the problem was reported resolved. Don't you wish your mentor knew
something about anything?


Not only are a an idiot, but you don't have the balls to post under your
real name and email address. Coward.


Is that the way you intended it to come out? Only Harry Krause could
butcher the English language so badly. You are Harry Krause, aren't you?


It was a ****ing typo, asshole.
  #34   Report Post  
posted to rec.boats
external usenet poster
 
First recorded activity by BoatBanter: Jul 2011
Posts: 74
Default Atlanta - a Wonderful City

On 7/27/2011 2:54 PM, X-Man wrote:
On 7/27/11 1:39 PM, Beach Bum wrote:
On 7/27/2011 11:39 AM, X-Man wrote:
On 7/27/11 9:15 AM, Florida Jim wrote:
On 7/27/2011 8:49 AM, North Star wrote:
On Jul 27, 8:56 am, wrote:
On 7/27/11 2:51 AM, I_am_Tosk wrote:

In article84674639-d842-4517-be66-bfd1ae004e89
@e40g2000yqn.googlegroups.com, says...

On Jul 26, 6:43 pm, wrote:
Enough said right there!

Oh look, it's Loogy......

Uh, no... It's Harry. To many of us have been ignoring him so he is
starting the cycle of destruction again...

Oh, and once again the moron who claims to be a network maven who
operates an internet services company proves he knows no more about
the
internet than he does about "wrenching" a winning motorbike.

Wrenching a motorbike???
He couldn't figure out what was wrong with a pressure washer.
Some mechanic.............. he must get his mechanical advice from
JohnnyH

Well then, JohhnyH must have steered him in the right direction since
the problem was reported resolved. Don't you wish your mentor knew
something about anything?


Not only are a an idiot, but you don't have the balls to post under your
real name and email address. Coward.


Is that the way you intended it to come out? Only Harry Krause could
butcher the English language so badly. You are Harry Krause, aren't you?


It was a ****ing typo, asshole.


Are you implying that all typos should get a pass?
You can count me in.
  #35   Report Post  
posted to rec.boats
external usenet poster
 
First recorded activity by BoatBanter: Jul 2011
Posts: 183
Default Atlanta - a Wonderful City

In article m, "not a
says...

On 7/27/2011 2:54 PM, X-Man wrote:
On 7/27/11 1:39 PM, Beach Bum wrote:
On 7/27/2011 11:39 AM, X-Man wrote:
On 7/27/11 9:15 AM, Florida Jim wrote:
On 7/27/2011 8:49 AM, North Star wrote:
On Jul 27, 8:56 am, wrote:
On 7/27/11 2:51 AM, I_am_Tosk wrote:

In article84674639-d842-4517-be66-bfd1ae004e89
@e40g2000yqn.googlegroups.com, says...

On Jul 26, 6:43 pm, wrote:
Enough said right there!

Oh look, it's Loogy......

Uh, no... It's Harry. To many of us have been ignoring him so he is
starting the cycle of destruction again...

Oh, and once again the moron who claims to be a network maven who
operates an internet services company proves he knows no more about
the
internet than he does about "wrenching" a winning motorbike.

Wrenching a motorbike???
He couldn't figure out what was wrong with a pressure washer.
Some mechanic.............. he must get his mechanical advice from
JohnnyH

Well then, JohhnyH must have steered him in the right direction since
the problem was reported resolved. Don't you wish your mentor knew
something about anything?


Not only are a an idiot, but you don't have the balls to post under your
real name and email address. Coward.

Is that the way you intended it to come out? Only Harry Krause could
butcher the English language so badly. You are Harry Krause, aren't you?


It was a ****ing typo, asshole.


Are you implying that all typos should get a pass?
You can count me in.


You're damned right! I know that Don picks out everyone's but mine and
his, and I think that needs to stop.


  #36   Report Post  
posted to rec.boats
external usenet poster
 
First recorded activity by BoatBanter: Dec 2009
Posts: 3,267
Default Atlanta - a Wonderful City

On Jul 27, 9:07*am, I_am_Tosk wrote:
In article e97e0ffe-f822-4889-8065-9792e281d736
@r11g2000prd.googlegroups.com, says...







On Jul 27, 8:56 am, X-Man wrote:
On 7/27/11 2:51 AM, I_am_Tosk wrote:


In article84674639-d842-4517-be66-bfd1ae004e89
@e40g2000yqn.googlegroups.com, says...


On Jul 26, 6:43 pm, wrote:
Enough said right there!


Oh look, it's Loogy......


Uh, no... It's Harry. To many of us have been ignoring him so he is
starting the cycle of destruction again...


Oh, and once again the moron who claims to be a network maven who
operates an internet services company proves he knows no more about the
internet than he does about "wrenching" a winning motorbike.


Wrenching a motorbike???
He couldn't figure out what was wrong with a pressure washer.
Some mechanic.............. he must get his mechanical advice from
JohnnyH.


Uh, I fixed the pw within an hour or so.... Never had one apart before.
And as to wrenching, don't be a douchbag pig boy, Jessica and I do all
the work on the bike. We did a top end with piston, rings, valves (shop
cut valve seats and honed piston) and a few other minor parts. She did
90% of the work with me offering guidance on spoooging the thing with
oil and I used the torque wrench. She did the rest from sliding the
cylinder over the piston, to lining up the timing chain and cams. The
thing starts first kick, I am very proud of her and we saved almost 600
bucks doing the job ourselves... *Now, back to the filter with you pig
boy, go clean your yard...

--
Team Rowdy Mouse, Banned from the Mall for life!- Hide quoted text -

- Show quoted text -


The only 2 cycle engine I've ever "wrenched " was a 1977 Arctic Cat
Zenon 440 cc free-air snowsled. Twin 32 mm Mikunis .I found working on
the engine very calming for some reason. When I got the engine the
cylinder pressure was ...like...75 lbs in one, and 80 in the other.
Neat thing : the " Cat Wizard " as I called him ( a Grass Dragger )
told me instead of new rings, (there are only TWO on each slug on this
particular engine) try taking both off, and swapping top for bottom.
Great idea! Not only did it save me some coin, but brought BOTH
cylinders up to 110 lbs.

Did that Sled ever fly after I put it back together,and re-installed
the correct exhaust ! Took it for a test run, sans hood, and 3/4 the
way across a 50 acre field, the Sled was still breaking ground.Mind
you, that was with metal bars (cleated ) on the track, and 120 " Tiger
Claws " down the center . I drove it one day so fast on the road that
I couldn't catch my breath. It was -15 that day. The Sled would easily
top 70 MPH. Ya, I know, its not that fast, but fast enough for me.70
MPH on a Sled feels like 110, especially when you're on a ice-covered
road. Glad I had Carbide ski runners !!

Had to sell it, cause it wasnt any good for trails. You HAD to
maintain at least 30 MPH to keep it cool. The thing was a " Lake Racer
", as we called it.
  #37   Report Post  
posted to rec.boats
external usenet poster
 
First recorded activity by BoatBanter: Jul 2011
Posts: 20
Default Atlanta - a Wonderful City

X-Man wrote:
On 7/27/11 11:17 AM, I_am_Tosk wrote:
In aweb.com, "not a
says...

On 7/27/2011 9:22 AM, basskisser wrote:
I_am_Tosk wrote:


Uh, I fixed the pw within an hour or so.... Never had one apart
before. And as to wrenching, don't be a douchbag pig boy, Jessica and
I do all the work on the bike. We did a top end with piston, rings,
valves (shop cut valve seats and honed piston) and a few other minor
parts. She did 90% of the work with me offering guidance on spoooging
the thing with oil and I used the torque wrench. She did the rest
from
sliding the cylinder over the piston, to lining up the timing chain
and cams. The thing starts first kick, I am very proud of her and we
saved almost 600 bucks doing the job ourselves... Now, back to the
filter with you pig boy, go clean your yard...


Cool. I love doing top ends!
Nice when she fires right up too!
Don't expect the fleabaggers to understand this!

Those so called fleabaggers don't have any appreciation for the
satisfaction do it yourselfers get from completeing a task without
having to pay someone to do it.


It was comical... The two of us in full panic attack mode for about 4
hours But we did it, and it's been running fine, starting with a kick
or two for over a week now and that's a lot of engine on time for us...



Tosk conversing with the ID spoofer as if he isn't the ID spoofer and
of course, is being played. Priceless.

Say what, Ex-Man?
  #38   Report Post  
posted to rec.boats
external usenet poster
 
First recorded activity by BoatBanter: Jul 2011
Posts: 183
Default Atlanta - a Wonderful City

In article ,
says...

X-Man wrote:
On 7/27/11 11:17 AM, I_am_Tosk wrote:
In aweb.com, "not a
says...

On 7/27/2011 9:22 AM, basskisser wrote:
I_am_Tosk wrote:


Uh, I fixed the pw within an hour or so.... Never had one apart
before. And as to wrenching, don't be a douchbag pig boy, Jessica and
I do all the work on the bike. We did a top end with piston, rings,
valves (shop cut valve seats and honed piston) and a few other minor
parts. She did 90% of the work with me offering guidance on spoooging
the thing with oil and I used the torque wrench. She did the rest
from
sliding the cylinder over the piston, to lining up the timing chain
and cams. The thing starts first kick, I am very proud of her and we
saved almost 600 bucks doing the job ourselves... Now, back to the
filter with you pig boy, go clean your yard...


Cool. I love doing top ends!
Nice when she fires right up too!
Don't expect the fleabaggers to understand this!

Those so called fleabaggers don't have any appreciation for the
satisfaction do it yourselfers get from completeing a task without
having to pay someone to do it.

It was comical... The two of us in full panic attack mode for about 4
hours But we did it, and it's been running fine, starting with a kick
or two for over a week now and that's a lot of engine on time for us...



Tosk conversing with the ID spoofer as if he isn't the ID spoofer and
of course, is being played. Priceless.

Say what, Ex-Man?


Hey, I had to have a new handle. If I used my old one, everyone would
know that my google group is a failure.
  #39   Report Post  
posted to rec.boats
external usenet poster
 
First recorded activity by BoatBanter: Jul 2011
Posts: 74
Default Atlanta - a Wonderful City

On 7/28/2011 8:45 AM, X-Man wrote:
In articled4ydnYBkVMn6Oa3TnZ2dnUVZ_vSdnZ2d@giganews. com,
says...

X-Man wrote:
On 7/27/11 11:17 AM, I_am_Tosk wrote:
In aweb.com, "not a
says...

On 7/27/2011 9:22 AM, basskisser wrote:
I_am_Tosk wrote:


Uh, I fixed the pw within an hour or so.... Never had one apart
before. And as to wrenching, don't be a douchbag pig boy, Jessica and
I do all the work on the bike. We did a top end with piston, rings,
valves (shop cut valve seats and honed piston) and a few other minor
parts. She did 90% of the work with me offering guidance on spoooging
the thing with oil and I used the torque wrench. She did the rest
from
sliding the cylinder over the piston, to lining up the timing chain
and cams. The thing starts first kick, I am very proud of her and we
saved almost 600 bucks doing the job ourselves... Now, back to the
filter with you pig boy, go clean your yard...


Cool. I love doing top ends!
Nice when she fires right up too!
Don't expect the fleabaggers to understand this!

Those so called fleabaggers don't have any appreciation for the
satisfaction do it yourselfers get from completeing a task without
having to pay someone to do it.

It was comical... The two of us in full panic attack mode for about 4
hours But we did it, and it's been running fine, starting with a kick
or two for over a week now and that's a lot of engine on time for us...



Tosk conversing with the ID spoofer as if he isn't the ID spoofer and
of course, is being played. Priceless.

Say what, Ex-Man?


Hey, I had to have a new handle. If I used my old one, everyone would
know that my google group is a failure.


You mooks should shut up and let the real EX-man speak.
  #40   Report Post  
posted to rec.boats
external usenet poster
 
First recorded activity by BoatBanter: Jul 2011
Posts: 183
Default Atlanta - a Wonderful City

In article m, "not a
says...

On 7/28/2011 8:45 AM, X-Man wrote:
In articled4ydnYBkVMn6Oa3TnZ2dnUVZ_vSdnZ2d@giganews. com,
says...

X-Man wrote:
On 7/27/11 11:17 AM, I_am_Tosk wrote:
In aweb.com, "not a
says...

On 7/27/2011 9:22 AM, basskisser wrote:
I_am_Tosk wrote:


Uh, I fixed the pw within an hour or so.... Never had one apart
before. And as to wrenching, don't be a douchbag pig boy, Jessica and
I do all the work on the bike. We did a top end with piston, rings,
valves (shop cut valve seats and honed piston) and a few other minor
parts. She did 90% of the work with me offering guidance on spoooging
the thing with oil and I used the torque wrench. She did the rest
from
sliding the cylinder over the piston, to lining up the timing chain
and cams. The thing starts first kick, I am very proud of her and we
saved almost 600 bucks doing the job ourselves... Now, back to the
filter with you pig boy, go clean your yard...


Cool. I love doing top ends!
Nice when she fires right up too!
Don't expect the fleabaggers to understand this!

Those so called fleabaggers don't have any appreciation for the
satisfaction do it yourselfers get from completeing a task without
having to pay someone to do it.

It was comical... The two of us in full panic attack mode for about 4
hours But we did it, and it's been running fine, starting with a kick
or two for over a week now and that's a lot of engine on time for us...



Tosk conversing with the ID spoofer as if he isn't the ID spoofer and
of course, is being played. Priceless.
Say what, Ex-Man?


Hey, I had to have a new handle. If I used my old one, everyone would
know that my google group is a failure.


You mooks should shut up and let the real EX-man speak.


*I* am the real X-Man, dip****. What I said above is true.
Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is Off
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
wonderful nom=de=plume[_2_] General 62 July 26th 10 02:29 AM
Wonderful Eisboch General 37 December 24th 08 07:02 PM
Wonderful [email protected] General 0 December 23rd 08 08:11 PM
Atlanta Sunset Reginald P. Smithers III General 58 December 9th 07 06:31 PM


All times are GMT +1. The time now is 01:08 AM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 BoatBanter.com.
The comments are property of their posters.
 

About Us

"It's about Boats"

 

Copyright © 2017